Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Blackview BV9000 Pro
The Blackview BV9000 Pro uses the MediaTek MT6757CD platform with 6GB RAM, 128GB storage and a 5.7-inch display.
Two stock firmware packages are available: Android 8.0 build 20180528 and Android 7.1.1 build 20180104. Both use the standard SP Flash Tool workflow for MediaTek firmware.
Which Flash Mode Should You Use?
SP Flash Tool
Recommended for installing the BV9000 Pro stock firmware packages listed on this page.
What You Need Before Flashing
Confirm BV9000 Pro and record the installed build.
Choose the BV9000 Pro package for the Android version you intend to install.
Back up important files because firmware flashing may erase user data.
Install the MediaTek USB drivers and use a dependable USB data cable.
How to Flash the Blackview BV9000 Pro — Quick Overview
6-step quick reference for the Blackview BV9000 Pro. Need visuals or troubleshooting help? The full SP Flash Tool guide covers everything in detail.
-
Confirm exact device identity
-
Choose the firmware build
-
Prepare the computer
-
Load the firmware package
-
Start the flash
-
Allow the first boot to complete
Identifying the Firmware Package for MT6757CD
Extract the selected ZIP before opening SP Flash Tool. Choose the scatter file from that extracted firmware folder; do not substitute a scatter file from another Blackview model or Android build.
Blackview BV9000 Pro Firmware Versions
Two stock firmware builds are available for Blackview BV9000 Pro.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
20180528 |
Not specified | Android 8.0 | 1.49 GB | — | ⬇️ Download |
20180104 |
Not specified | Android 7.1.1 | 1.88 GB | — | ⬇️ Download |
AndroidFirmwareFile maintains the complete two-file inventory. See the complete archive on AndroidFirmwareFile.com →
Common Errors on the Blackview BV9000 Pro
Phone is not detected
Reinstall the MediaTek USB drivers, try another data cable and connect directly to the computer instead of using a USB hub.
Flash does not start
Confirm that the selected package is for the BV9000 Pro, extract it again and reload its scatter file before retrying.
Phone does not finish booting
Give the first startup additional time. If it still does not complete, stop and recheck the selected build rather than flashing unrelated partitions individually.
For more SP Flash Tool troubleshooting: SP Flash Tool Error Directory →
Frequently Asked Questions — Blackview BV9000 Pro
Use SP Flash Tool with the MediaTek USB drivers. Extract the selected firmware package before loading its scatter file.
The supplied filenames explicitly identify BV9000 Pro. Do not substitute them for another model without exact compatibility evidence.
It may. Back up photos, documents and account information before flashing, especially when changing Android versions or restoring a phone that no longer boots.
Ready to Flash?
Follow the full step-by-step SP Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.