Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi 5 Plus (Redmi Note 5)
The Xiaomi Redmi 5 Plus (Redmi Note 5) was launched in December 2017, built on the Qualcomm Snapdragon 625 platform. Known under codename vince (model numbers MEG7 Global, MET7 China, and MEI7 India), the handset features an unnotched 5.99-inch 18:9 Full HD+ display, up to 4 GB of RAM, a 12 MP rear camera, and a substantial 4000 mAh battery.
Flashing official Fastboot firmware recovers devices from bootloops, unbricks damaged partition tables, and restores clean factory software. Follow the verified package links and bench steps below to flash your phone safely.
Which Flash Mode Should You Use?
Xiaomi Mi Flash Fastboot Flashing (Recommended)
Standard official method for restoring stock MIUI firmware using an unlocked bootloader and Mi Flash Tool in Fastboot mode.
Qualcomm Emergency Download (EDL 9008) Mode
Low-level emergency recovery method used when the bootloader is locked or the handset is hard-bricked with no display.
TWRP Custom Recovery Installation
Custom recovery environment used for installing debloated custom ROMs like Xiaomi.eu or creating full Nandroid backups.
What You Need Before Flashing
Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility.
A 64-bit Windows computer with Mi Flash Tool (2018.05.28 or newer) and Qualcomm USB drivers.
Ensure the 4000 mAh battery has at least 50% charge to prevent shutdown during partition writes.
Use a quality data cable plugged into a rear USB 2.0 port to prevent communication drops.
Flashing Fastboot firmware with "clean all" completely wipes internal storage and applications.
Extract the .tgz archive twice using 7-Zip to reveal flash_all.bat in a clean directory path.
How to Flash the Xiaomi Redmi 5 Plus (Redmi Note 5) β Quick Overview
A condensed step-by-step summary specific to the Xiaomi Redmi 5 Plus (Redmi Note 5). Follow the full Mi Flash Tool guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Unlock bootloader with Mi Unlock
-
Extract Fastboot TGZ archive twice
-
Enter Fastboot mode
-
Configure Mi Flash Tool with "clean all"
-
Flash firmware and await reboot
Firmware Package for Snapdragon 625 (flash_all.bat)
Official Fastboot firmware packages for the Xiaomi Redmi 5 Plus are packaged as .tgz archives containing raw partition binaries (system.img, boot.img, recovery.img, vendor.img) managed by flash_all.bat, along with rawprogram0.xml and patch0.xml for low-level Qualcomm Snapdragon 625 EDL 9008 flashing.
flash_all.bat / rawprogram0.xml
Official Xiaomi Fastboot firmware is distributed as .tgz archives. Decompress the archive twice using 7-Zip until the folder containing "flash_all.bat" and the raw partition image files is visible.
Regional flashing rule: When flashing Global software onto Chinese hardware, never lock the bootloader. Always choose "clean all" (flash_all.bat) in Mi Flash Tool to avoid region-lock bricking.
Xiaomi Redmi 5 Plus (Redmi Note 5) Firmware Versions
Curated official stock firmware packages for the Xiaomi Redmi 5 Plus (Redmi Note 5). Verify your hardware model variant before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V11.0.2.0.OEGMIXM |
Global (MEG7 / MEI7) | Android 8.1 (MIUI 11.0) | 2.0 GB | 90dd70aa997c474261523ccbb3c9608f |
β¬οΈ Download |
V11.0.3.0.OEGCNXM |
China Mainland (MET7) | Android 8.1 (MIUI 11.0) | 2.2 GB | 102ca14cd73dae62a7cceaeeda2b94e1 |
β¬οΈ Download |
This phone family has additional regional builds and community recovery packages. Browse the complete archive on AndroidFirmwareFile.com β
Xiaomi Redmi 5 Plus (Redmi Note 5) β Important Notes
The Xiaomi Redmi 5 Plus features a 4000 mAh internal lithium-ion battery. Flashing via Fastboot takes approximately 3 to 5 minutes. Confirm your device has at least 50% battery charge before commencing flashing to ensure uninterrupted eMMC partition writes.
Troubleshooting Xiaomi Redmi 5 Plus Flashing & Boot Errors
Mi Flash Lock Brick: "This MIUI version can't be installed on this device"
Occurs when users flash Global firmware onto Chinese domestic units (MET7) while leaving "clean all and lock" checked. The re-locked bootloader reads the hardware cust region and halts boot. Workshop technicians recommend opening the rear cover to short EDL test points and re-flashing China Fastboot with "clean all" to revive the device.
Fastboot Transfer Failure: "Flash xbl error" or "missed hello packet"
Community repair discussions indicate that Qualcomm Fastboot and EDL handshakes frequently fail when connected to modern USB 3.0/3.1 ports or AMD Ryzen chipsets. Technicians suggest connecting through a basic USB 2.0 hub or plugging directly into a rear USB 2.0 motherboard port using an authentic short microUSB cable.
TWRP Recovery Data Decryption Error: "0MB internal storage"
Reported when flashing TWRP over stock Android 8.1 Oreo MIUI builds due to active forced filesystem encryption. Forum members suggest selecting Wipe > Format Data (typing "yes"), rebooting back into recovery, and then transferring ROM packages via MTP or USB OTG.
For solving common Mi Flash Tool error codes, region lock bricks, and TWRP storage issues: Xiaomi & Qualcomm Flashing Error Directory β
Frequently Asked Questions β Xiaomi Redmi 5 Plus (Redmi Note 5)
To enter Fastboot mode: Power off the phone completely, then press and hold Volume Down and Power simultaneously until the screen vibrates and the Mi Bunny mascot appears. To enter Recovery mode: Turn off the phone, then press and hold Volume Up and Power together until the Mi logo displays, then release Power while continuing to hold Volume Up.
This error happens when Global MIUI is flashed onto Chinese hardware (model MET7) with "clean all and lock" (flash_all_lock.bat) selected in Mi Flash Tool. Xiaomi bootloaders verify region tags against the motherboard. Locking the bootloader with mismatched regional software triggers this block. To recover, the phone must be flashed back to China MIUI or booted via EDL 9008 test points to unlock the bootloader.
If the bootloader is locked or corrupted, remove the rear metal casing to access the motherboard. Disconnect the battery flex cable, locate the two circular golden test points located near the SIM tray and camera housing, short them together using precision metal tweezers, and plug the microUSB cable into the PC. Windows Device Manager will enumerate "Qualcomm HS-USB QDLoader 9008".
Android 8.1 Oreo on MIUI forces full filesystem encryption on the user data partition. When booting TWRP for the first time, stock encryption prevents TWRP from mounting /data. In TWRP, go to "Wipe" > "Format Data", type "yes", and swipe to confirm. This formats the encryption header, allowing full storage access for flashing custom ROMs or Xiaomi.eu.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.