Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi 9 Lite / Xiaomi Mi CC9
The Xiaomi Mi 9 Lite / Xiaomi Mi CC9 (codename: pyxis, models M1904F3BG and M1904F3BC) launched in July 2019 (CC9) / September 2019 (Mi 9 Lite), integrating Qualcomm's Qualcomm Snapdragon 710 (SDM710, 10nm) processor with 6GB LPDDR4X RAM, a 6.39-inch Super AMOLED screen, and an illuminated rear notification logo.
Whether your phone is stuck in a bootloop, requires a clean factory unbrick via pyxis_eea_global_images_V12.5.3.0.RFCEUXM_20220727.0000.00_11.0_eea_861e3ec2ae.tgz, or you want to install twrp-3.7.0_9-0-pyxis.img to flash Xiaomi.eu custom software, follow our verified instructions below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot .tgz Factory Restore)
Executes flash_all.bat across Fastboot to rewrite all system, vendor, boot, and modem partitions cleanly on unlocked pyxis hardware.
TWRP Recovery (Fastboot Recovery Image Flash)
Flashes official TeamWin custom recovery onto the dedicated physical recovery partition using fastboot flash recovery twrp-3.7.0_9-0-pyxis.img.
Qualcomm EDL 9008 (Emergency Testpoint Unbrick)
Direct low-level hardware flashing path for deeply bricked devices that fail to turn on or cannot access the bootloader.
Essential Preparations for Xiaomi Mi 9 Lite (pyxis)
Run fastboot getvar product in terminal to verify your device is pyxis (model M1904F3BG or M1904F3BC) before transferring partition images.
Execute fastboot getvar anti before flashing to ensure you are not attempting an unsupported firmware downgrade that could trip hardware fuses.
Ensure your Windows PC properly detects the Android Bootloader Interface without driver exclamation marks in Device Manager.
Keep the 4030 mAh battery adequately charged to prevent unexpected power drops while writing to high-speed UFS 2.1 storage.
Flashing factory Fastboot images completely erases internal storage, including photos, downloads, and user applications.
5-Step Mi Flash & Recovery Installation Procedure
A condensed step-by-step summary specific to the Xiaomi Mi 9 Lite / Xiaomi Mi CC9. Follow the full Mi Flash Tool guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Extract pyxis_eea_global_images_V12.5.3.0.RFCEUXM_20220727.0000.00_11.0_eea_861e3ec2ae.tgz and Verify Directory
-
Boot pyxis into Fastboot Mode via Physical Volume Down and Power Buttons
-
Verify Fastboot Detection and Check Anti-Rollback Index via fastboot getvar anti
-
Load Unpacked Folder in Mi Flash and Select clean all (flash_all.bat)
-
Flash Partitions Preserving Persist Calibration and Await Initial MIUI Boot
Fastboot Script Architecture & Image Layout in Snapdragon 710 Packages
Official Fastboot firmware packages for the Xiaomi Mi 9 Lite and Mi CC9 (pyxis) unpack to reveal flash_all.bat alongside flash_all_lock.bat, flash_all_except_storage.bat, and the images folder containing raw partition images including system.img, vendor.img, boot.img, recovery.img, cust.img, and modem images.
flash_all.bat
Unpacking pyxis_eea_global_images_V12.5.3.0.RFCEUXM_20220727.0000.00_11.0_eea_861e3ec2ae.tgz provides flash_all.bat, flash_all_lock.bat, and the images folder containing system.img, vendor.img, boot.img, recovery.img, cust.img, and modem images. Always select the main folder containing the .bat files in Mi Flash Tool.
Always verify your device reports codename pyxis before executing flash_all.bat. Point Mi Flash Tool to the root extracted folder rather than the images directory, and ensure clean all is selected to avoid locking the bootloader on cross-region hardware.
Verified Factory Fastboot & Recovery Packages for Xiaomi Mi 9 Lite / Xiaomi Mi CC9
Official factory Fastboot packages and custom recovery builds for Xiaomi Mi 9 Lite / Xiaomi Mi CC9 (pyxis). For additional archive builds, regional packages, and recovery OTAs, see AndroidFirmwareFile.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V12.5.3.0.RFCEUXM |
Europe / EEA (UK & EU) β Final Official MIUI 12.5 Fastboot | Android 11.0 R (July 2022) | 3.39 GB | 861e3ec2ae4d0be84206457b453fd3a3 |
β¬οΈ Download |
V12.5.5.0.RFCCNXM |
China (CN) β Final Official MIUI 12.5 Fastboot | Android 11.0 R (Oct 2021) | 4.03 GB | 571cf27a519a0746681fa5a344b33520 |
β¬οΈ Download |
V12.5.5.0.RFCCNXM_v12-11 |
Community Custom ROM (Xiaomi.eu Multilingual) | Android 11.0 R (Nov 2021) | 2.91 GB | ac5cd82069b3f360eb964cc0481ff277 |
β¬οΈ Download |
TWRP 3.7.0_9-0 Official |
Custom Recovery (TeamWin Recovery Project) | Android 9.0 - 12.0 | 64.00 MB | e3fa4d01a0576942d1a2c0aecfbf32e7 |
β¬οΈ Download |
Need older builds, Russia releases, Recovery ZIPs, or earlier TWRP builds? View the full pyxis archive on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Flashing Modes & Installation Methods for pyxis
Restoring the Xiaomi Mi 9 Lite / Mi CC9 (pyxis) to factory state requires matching the flashing utility to your intended software goal. For complete unbricking, clean updates, or bootloop recovery, pyxis_eea_global_images_V12.5.3.0.RFCEUXM_20220727.0000.00_11.0_eea_861e3ec2ae.tgz provides the official European factory build with full Google services.
If you prefer a debloated multilingual experience with native call recording, you can flash the custom recovery image twrp-3.7.0_9-0-pyxis.img over Fastboot mode and install xiaomi.eu_multi_MI9LiteMICC9_V12.5.5.0.RFCCNXM_v12-11.zip. Remember that transitioning from encrypted Android 11 firmware requires formatting userdata inside TWRP to clear storage encryption.
Troubleshooting Xiaomi Mi 9 Lite (pyxis) Flashing & Fastboot Errors
FAILED (remote: 'Partition table doesn't exist')
Mi Flash failed to parse GPT partition headers because the firmware path contains spaces or special characters. Move your unpacked firmware to a root directory such as C:\pyxis_fw\ and retry.
Fastboot Hang: Device undetected in Fastboot mode on Windows 10/11 USB 3.0/3.2 ports
AMD and Intel USB 3.1 host controllers frequently fail packet negotiation with the Snapdragon 710 bootloader. Connect your phone to a native rear USB 2.0 port or use a basic USB 2.0 passive hub.
TWRP Storage Lock: Internal storage shows 0MB or random alphanumeric folders
Android 11 File-Based Encryption (FBE) is locking the userdata partition. Inside TWRP, navigate to Wipe > Format Data, type "yes" to confirm, and reboot recovery to restore access.
Optical In-Display Fingerprint Sensor or Camera unresponsive (Persist Partition Missing)
Factory optical sensor geometry and Sony IMX586 ISP calibration matrices were erased during partition wiping. Restore your raw persist.img backup via TWRP or recalibrate sensors in CIT hardware diagnostic menu (*#*#6484#*#*).
Encountering a specific error code or connection issue during flashing? Xiaomi Fastboot & Mi Flash Error Directory β
Workshop Flashing & Troubleshooting Questions
The Snapdragon 710 kernel enforces Android Verified Boot (AVB 2.0). If you flash a custom recovery like TWRP directly to the recovery partition without modifying AVB flags, dm-verity triggers a security trip during bootloader handoff, throwing the device into an immediate bootloop back to Fastboot. To prevent this, flash a patched or blank vbmeta image using: fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img before rebooting.
Stock MIUI kernels contain an init script that detects third-party recovery environments and automatically reinstalls stock Mi-Recovery during bootup. To prevent this overwrite after executing fastboot flash recovery twrp-3.7.0_9-0-pyxis.img, immediately hold Volume Up and Power while executing fastboot reboot to force an initial boot directly into TWRP, then install Magisk or flash your custom ROM zip.
First, install TWRP 3.7.0 and format userdata (Wipe > Format Data > type "yes") to remove stock Android 11 encryption. Reboot recovery once to reload clean partition tables, transfer xiaomi.eu_multi_MI9LiteMICC9_V12.5.5.0.RFCCNXM_v12-11.zip to internal storage or a USB OTG drive, flash the archive, and wipe Dalvik/Cache before rebooting into system.
If the bootloader is deeply corrupted and cannot reach Fastboot mode, you must use hardware test points to force Qualcomm HS-USB QDLoader 9008 mode. Carefully heat and remove the rear glass cover, unfasten the upper motherboard plastic bracket, disconnect the battery flex connector, and bridge the two gold test point pads adjacent to the camera module using metallic tweezers while plugging in the USB cable.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.