Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi CC9 Meitu Edition
The Xiaomi Mi CC9 Meitu Edition (codename: vela, model M1904F3BT / M1904F3BC) launched in July 2019, integrating Qualcomm's Qualcomm Snapdragon 710 (SDM710, 10nm) processor with an 8GB RAM architecture and dedicated Meitu AI portrait processing software.
Whether your handset is caught in a boot loop, needs a clean restoration via vela_images_V12.5.5.0.RFECNXM_20211025.0000.00_11.0_cn_53c3aee7e4.tgz, or you want to flash TWRP-3.3.2B-0302-XIAOMI_CC9-CN-wzsx150-fastboot.zip, follow our verified instructions below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot .tgz Factory Restore)
Executes flash_all.bat across Fastboot to rewrite all system, vendor, boot, and modem partitions cleanly on unlocked M1904F3BT hardware.
TWRP Recovery (wzsx150 Fastboot Installer)
Flashes custom TWRP recovery onto the recovery partition using the automated fastboot batch script provided by developer wzsx150.
Qualcomm EDL 9008 (Emergency Testpoint Unbrick)
Direct low-level hardware flashing path for deeply bricked devices that fail to turn on or cannot access the bootloader.
Essential Preparations for Xiaomi Mi CC9 Meitu (vela)
Run fastboot getvar product in terminal to verify your device is vela (M1904F3BT) and not the standard pyxis model.
Execute fastboot getvar anti before flashing to ensure you are not attempting an unsupported firmware downgrade.
Ensure your Windows PC properly detects the Android Bootloader Interface without driver exclamation marks in Device Manager.
Keep the 4030 mAh battery adequately charged to prevent unexpected power failure during system partition flashing.
Flashing factory Fastboot images completely erases internal UFS storage, including photos, downloads, and app data.
5-Minute Fastboot & TWRP Flashing Procedure
A fast reference for flashing the Xiaomi Mi CC9 Meitu Edition (Snapdragon 710) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Verify hardware codename vela (M1904F3BT) via fastboot getvar product and check anti-rollback index with fastboot getvar anti
-
Extract vela_images_V12.5.5.0.RFECNXM_20211025.0000.00_11.0_cn_53c3aee7e4.tgz twice with 7-Zip into a clean directory such as C:\vela_fw\
-
Put your phone into Fastboot mode by holding Volume Down and Power, then connect to a rear USB 2.0 port to prevent partition timeouts
-
Launch Mi Flash Tool, select C:\vela_fw\, check the clean all option at the bottom, and avoid clean all and lock on modified systems
-
Alternatively for custom recoveries, unpack TWRP-3.3.2B-0302-XIAOMI_CC9-CN-wzsx150-fastboot.zip, run the installer, and format data
Fastboot Script Architecture & Image Layout in Snapdragon 710 Packages
Fastboot firmware packages for the Xiaomi Mi CC9 Meitu Edition (vela) extract to reveal flash_all.bat alongside clean_all_and_lock.bat, flash_all_except_storage.bat, and the images folder containing raw partition images including system.img, vendor.img, boot.img, and modem.img.
flash_all.bat
Unpacking vela_images_V12.5.5.0.RFECNXM_20211025.0000.00_11.0_cn_53c3aee7e4.tgz provides flash_all.bat, flash_all_lock.bat, and the images folder containing system.img, vendor.img, boot.img, recovery.img, and modem images. Always select the main folder containing the .bat files in Mi Flash Tool.
Always verify your device codename is vela before executing flash_all.bat. Point Mi Flash Tool to the root extracted folder rather than the images directory, and ensure clean all is selected to preserve future bootloader flexibility.
Verified Factory Fastboot & Recovery Packages for Xiaomi Mi CC9 Meitu Edition
Official factory Fastboot packages and custom recovery builds for Xiaomi Mi CC9 Meitu Edition (vela). For additional archive builds and recovery OTA packages, see AndroidFirmwareFile.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V12.5.5.0.RFECNXM |
China (CN) β Final Official MIUI 12.5 Fastboot | Android 11.0 R (Oct 2021) | 3.92 GB | 53c3aee7e4d3188be8f77d17c3c93d0a |
β¬οΈ Download |
TWRP 3.3.2B-0302 |
Custom Fastboot Recovery by wzsx150 | Android 9.0 - 11.0 | 30 MB | d5471d94419fea192f2c57deb9da232c |
β¬οΈ Download |
Need the official recovery OTA update package alongside Fastboot and TWRP? View the full vela archive on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Flashing Modes & Installation Methods for vela
Restoring the Xiaomi Mi CC9 Meitu Edition (vela) to factory state requires matching the flashing utility to your intended software goal. For complete unbricking, clean updates, or boot loop recovery, vela_images_V12.5.5.0.RFECNXM_20211025.0000.00_11.0_cn_53c3aee7e4.tgz provides the official China Stable MIUI 12.5 factory build.
If you are flashing custom ROMs or rooting, you can install the custom recovery archive TWRP-3.3.2B-0302-XIAOMI_CC9-CN-wzsx150-fastboot.zip over Fastboot mode. Keep in mind that moving from encrypted Android 11 builds requires a data format inside TWRP to clear storage encryption.
Troubleshooting Mi CC9 Meitu (vela) Flashing & Fastboot Errors
FAILED (remote: 'Flashing is not allowed in Lock State')
Fastboot rejects partition writes because the bootloader is locked. Run the official Mi Unlock Tool to unlock the device before attempting to flash factory images.
FAILED (remote: 'anti-rollback check failed')
The firmware build you are attempting to flash carries an anti-rollback index lower than the one currently recorded in your hardware fuses. Flash build V12.5.5.0.RFECNXM or newer to proceed.
error: cannot load 'boot.img': No such file or directory
Mi Flash Tool failed to locate required partition images because the firmware path contains spaces, special symbols, or extra subfolders. Move your firmware to a root path such as C:\vela_fw\ and verify the images folder is directly inside.
error: failed to write partition 'system'
Large partition transfers timed out over Fastboot. This typically occurs when using front-panel USB 3.0/3.1 ports. Switch to a rear motherboard USB 2.0 port and use the original short USB Type-C cable.
Encountering a specific error code or connection issue during flashing? Xiaomi Fastboot & Mi Flash Error Directory β
Workshop Flashing & Troubleshooting Questions
If your Mi CC9 Meitu Edition is running an unofficial ROM, custom recovery, or modified system partition, choosing clean all and lock (flash_all_lock.bat) in Mi Flash Tool locks the bootloader against unsigned software. The bootloader verification will fail during the subsequent boot, displaying "This MIUI version can't be installed on this device" and leaving the phone stuck in recovery. Always select clean all unless flashing untouched stock China firmware on an unmodified device.
The Qualcomm Snapdragon 710 bootloader handshake in Fastboot mode is sensitive to xHCI packet negotiation timeouts common on modern AMD motherboard chipsets (B450, B550, X570, AM5) and Intel USB 3.1 controllers. This causes the flash process to fail midway with "error: failed to write partition". Connecting through a native USB 2.0 port or using a basic USB 2.0 extension hub eliminates these communication drops.
Official Android 11 MIUI 12.5 builds use Android File-Based Encryption (FBE) with updated cryptographic keys. Older custom recovery releases like TWRP 3.3.2B cannot automatically decrypt this Android 11 schema, resulting in random alphanumeric folder names in /sdcard or a password prompt. To resolve this inside TWRP, navigate to Wipe > Format Data, type "yes" to confirm, and reboot back into Recovery.
When a device is hard-bricked, fails to power on, or cannot reach Fastboot mode, it must be flashed via Qualcomm Emergency Download (EDL) mode. On the Mi CC9 Meitu Edition, this requires removing the glass back panel, disconnecting the battery flex cable, and bridging the two gold EDL test points located on the motherboard near the camera module with metallic tweezers while plugging in the USB cable to a PC.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.