Xiaomi

Xiaomi Mi Play (lotus): Stock Firmware Flashing Guide

Complete firmware flashing guide for the Xiaomi Mi Play using Mi Flash Tool. Covers Xiaomi Mi Play (lotus), MediaTek MT6765 drivers, and Mi Flash Tool procedures.

Xiaomi Mi Play December 2018
Models
M1901F9E, M1901F9G
CPU
Octa-core (4x2.3 GHz Cortex-A53 & 4x1.8 GHz Cortex-A53)
GPU
PowerVR GE8320
RAM
4 GB / 6 GB LPDDR4X
Storage
64 GB / 128 GB eMMC 5.1 (microSD expandable up to 256 GB)
Display
5.84" IPS LCD, FHD+ 1080Γ—2280 pixels (19:9 ratio, 432 ppi)
Battery
3000 mAh Li-Ion, 10W wired charging via microUSB 2.0
OS
Android 8.1 (MIUI 11.0), Launched on Android 8.1 (MIUI 10.0)
Connectivity
4G LTE Dual-SIM, Wi-Fi 802.11 a/b/g/n/ac dual-band, Bluetooth 4.2, GPS, microUSB 2.0
Colors: Dream Blue Twilight Gold Black

About the Xiaomi Mi Play

The Xiaomi Mi Play was released in December 2018, built on the MediaTek Helio P35 MT6765 (12nm FinFET) platform. Featuring a 5.84-inch Full HD+ waterdrop notch display, dual 12 MP + 2 MP cameras, and a rear-mounted capacitive fingerprint sensor, the handset delivered compact styling and dependable everyday performance.

Flashing official factory Fastboot firmware using Xiaomi Mi Flash Tool repairs corrupted partitions, recovers bootlooping devices, and restores official MIUI stability. Follow the verified driver preparation and procedural steps below to flash your device safely.

Which Flash Mode Should You Use?

MediaTek BootROM / BROM Mode

Low-level hardware recovery mode accessed via key combos or motherboard test points when Fastboot mode is broken or the bootloader is locked.

How to enter
Power down phone, hold Volume Up and Volume Down together, and insert the microUSB cable (or short test points if soft-bricked)
Requires
Windows PC, MediaTek USB VCOM drivers, MTK Auth Bypass tool, microUSB cable

Stock Android Recovery Mode

Stock recovery interface for performing factory data resets and clearing cache partitions.

How to enter
With phone powered off, press and hold Volume Up + Power buttons simultaneously until the Mi recovery menu appears
Requires
Handset only (no computer needed)

What You Need Before Flashing

1
Windows PC & Mi Flash Tool

A PC running 64-bit Windows with Mi Flash Tool and official MediaTek USB drivers installed.

2
Verified Fastboot TGZ Package

Download and unpack the official V11.0.10.0.OFIMIXM archive twice with 7-Zip until flash_all.bat is visible.

3
50%+ Battery Charge

Ensure the 3,000 mAh battery has at least 50% charge to maintain reliable power throughout the flashing process.

4
Direct Motherboard USB Port

Use a quality microUSB data cable connected directly to a rear USB 2.0 port on the computer motherboard.

5
Select "Clean All" Option

In Mi Flash Tool, select "clean all" at the bottom right. Never select "clean all and lock" on cross-region hardware.

How to Flash the Xiaomi Mi Play β€” Quick Overview

5-step quick reference for the Xiaomi Mi Play. Need visuals or troubleshooting help? The full Mi Flash Tool guide covers everything in detail.

  1. Unlock bootloader with Mi Unlock
  2. Extract Fastboot lotus_global_images_V11.0.10.0.OFIMIXM_20210108.0000.00_8.1_global_4abc0cf1e1.tgz archive twice
  3. Enter Fastboot mode
  4. Configure Mi Flash Tool with "clean all"
  5. Flash partitions and await first boot

Fastboot Script & Partition Binaries for Helio P35

Official Fastboot firmware packages for the Xiaomi Mi Play (lotus) contain raw partition images (boot.img, system.img, vendor.img, cust.img, and preloader_lotus.bin) orchestrated via flash_all.bat and Fastboot scripts. In Mi Flash Tool, these scripts deploy partition images directly to the MediaTek Helio P35 eMMC 5.1 storage controller.

flash_all.bat

Official factory Fastboot firmware for the Xiaomi Mi Play utilizes flash_all.bat to deploy partition images to the MediaTek Helio P35 storage controller. In Mi Flash Tool, select the root extracted folder containing these scripts.

The Xiaomi Mi Play (board codename lotus) is built on MediaTek's Helio P35 (MT6765) platform with 4GB/6GB LPDDR4X RAM, eMMC 5.1 internal storage, dual 12 MP + 2 MP rear cameras, and a 5.84-inch Full HD+ waterdrop display.

Always verify that your device codename is "lotus" before flashing. Do not attempt to flash firmware intended for other MediaTek Xiaomi handsets such as the Redmi 6 (cereus) or Redmi 6A (cactus), as memory maps, display drivers, and preloader images differ significantly.

Xiaomi Mi Play Firmware Versions

Tested stock firmware package for the confirmed hardware variant of the Xiaomi Mi Play. Always confirm your model codename is "lotus" before flashing.

Version Region Android Version Size MD5 Download
V11.0.10.0.OFIMIXM (Android 8.1) 2.1 GB 4abc0cf1e16fa395a682e494d569dfe6 ⬇️ Download

This device family includes 7 additional China stable, Russia, and weekly beta packages in the full archive. Browse the complete 8-package archive on AndroidFirmwareFile.com β†’

Xiaomi Mi Play β€” Important Notes

Flashing official Fastboot TGZ firmware via Mi Flash Tool resolves bootloops, fixes corrupted system partitions, and restores the factory MIUI operating system to its verified clean state.

Because the MediaTek Helio P35 platform relies on secure BootROM authentication when the bootloader is locked, keeping your bootloader unlocked or utilizing MTK auth bypass methods provides the most dependable repair approach.

Troubleshooting Xiaomi Mi Play (lotus) Flashing & MTK BootROM Errors

SP Flash Tool BROM Auth Rejection: "STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012)"

When attempting low-level unbricking on the Helio P35 platform via SP Flash Tool, the MediaTek BootROM stops the connection because secure SLA authentication is enabled. Technicians suggest running an open-source MTK Auth Bypass tool or mtkclient to disable BROM handshake protection before clicking Download in SP Flash Tool.

Baseband & Cellular Loss: "Invalid IMEI / Unknown Baseband (nvdata corrupted)"

Selecting full format operations in low-level flashing tools erases the nvdata and nvram partitions storing the handset's unique radio configuration. Workshop repair logs recommend sticking strictly to "clean all" (flash_all.bat) in Mi Flash Tool or "Download Only" in SP Flash Tool to protect vital RF calibration partitions.

Cross-Region Bootloader Lock Brick: "This MIUI version can't be installed on this device"

Selecting "clean all and lock" (flash_all_lock.bat) in Mi Flash Tool when flashing Global firmware onto an original China hardware unit (M1901F9E) trips Xiaomi's bootloader region security. The phone locks against conflicting regional certificates and fails startup. Community repair discussions advise always choosing "clean all" (flash_all.bat) when flashing international packages.

For in-depth Xiaomi Fastboot error codes, MTK driver setup, and low-level unbricking guides: Mi Flash Tool Error Directory β†’

Frequently Asked Questions β€” Xiaomi Mi Play

Ready to Flash?

Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.

Open Full Guide