Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Pad 5 (Wi-Fi)
The Xiaomi Pad 5 (Wi-Fi) (codename: nabu) launched in September 2021 featuring an 11.0-inch 120Hz WQHD+ display powered by Qualcomm's Qualcomm Snapdragon 860 (7nm TSMC SM8150-AC) processor and an 8,720 mAh battery with 33W fast charging.
Whether you need to unbrick a tablet stuck on the boot screen, perform a clean factory installation, or flash official European firmware using nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz, follow the verified steps below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot ROM)
The official factory restoration method for nabu. Executes flash_all.bat to write boot, dtbo, super, and userdata partitions. Requires an unlocked bootloader and wipes all internal storage.
Mi Assistant (Recovery Sideload)
System repair mode via stock Mi Recovery for tablets with locked bootloaders using signed official Recovery ZIP update packages.
OrangeFox / Custom Recovery (Ramdisk Boot)
Boot a custom recovery ramdisk temporarily via Fastboot to flash custom ROMs, Magisk root, or persistent recovery installer ZIPs without physical recovery partition.
Fastboot CLI (Command Line)
Flash individual partition images like boot.img or vbmeta.img and verify device variables from terminal prompt.
Essential Pre-Flash Setup for Xiaomi Pad 5
Fastboot flashing requires an unlocked bootloader via the Xiaomi Community process. Locked devices should use stock Mi Assistant Recovery.
A Windows PC with official Xiaomi USB drivers and Google SDK Platform-Tools capable of writing multi-gigabyte super.img chunks.
Connect the high-quality Type-C cable directly to a rear motherboard USB 2.0 port to prevent communication drops during flashing.
Ensure the 8,720 mAh battery has ample charge so flashing does not fail due to sudden power loss.
Executing flash_all.bat completely formats internal UFS 3.1 storage. Backup personal documents and media before proceeding.
Mi Flash & Fastboot Walkthrough for Pad 5 (nabu)
A fast reference for flashing the Xiaomi Pad 5 (Wi-Fi) (Snapdragon 860) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Confirm codename nabu and unlocked bootloader status
-
Extract nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz twice using 7-Zip
-
Use a native rear USB 2.0 port to prevent fastbootd transfer drops
-
Select C:\nabu_fw\ and strictly verify "clean all"
-
Click Flash and allow 4–8 minutes to flash UFS 3.1 partitions
Finding flash_all.bat Inside SM8150-AC Packages
Official factory Fastboot packages for the Xiaomi Pad 5 (nabu) ship as compressed .tgz archives. After extracting twice with 7-Zip, the folder structure reveals the flash_all.bat batch script and the images subfolder containing kernel boot, dtbo, and the multi-gigabyte super.img dynamic partition image:
flash_all.bat
Official Xiaomi factory Fastboot packages (such as nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz) ship as compressed .tgz archives. Extract the archive twice using 7-Zip to expose flash_all.bat alongside the images directory, then point Mi Flash Tool directly to that top folder.
The KX firmware tag identifies the Xiaomi Pad 5 (nabu) powered by Qualcomm Snapdragon 860. Do not flash these packages onto Snapdragon 870 Pad 5 Pro sibling variants (enuma or elish).
Always point Mi Flash Tool directly to the top-level folder holding flash_all.bat (for example C:\nabu_fw\), rather than the inner images directory.
Crucial: Ensure "clean all" (flash_all.bat) is highlighted before flashing. Never choose "clean all and lock" on imported or regionally modified units, as bootloader relocking triggers a firmware validation freeze.
Xiaomi Pad 5 (Wi-Fi) Firmware Versions
Verified official Fastboot and Recovery packages for the Xiaomi Pad 5 (Wi-Fi) (nabu). For additional regional builds (India, China, Russia, Turkey, Taiwan) and archival releases, visit the master technical repository on AndroidFirmwareFile.com below.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS1.0.6.0.TKXEUXM |
EEA (Europe) — Fastboot TGZ (Unlocked) | Android 13.0, Sep 2024 | 4.12 GB | dd27c366778a5a305a2170af3551f428 |
⬇️ Download |
OS1.0.6.0.TKXEUXM (Recovery) |
EEA (Europe) — Recovery ZIP (Locked/Unlocked) | Android 13.0, Sep 2024 | 3.42 GB | d2d151c706af84deeef54ab08f279e42 |
⬇️ Download |
OS1.0.3.0.TKXCNXM |
China (CN) — Fastboot TGZ (Unlocked) | Android 13.0, May 2024 | 4.84 GB | ff15a7adfc55be0a38b5c7862ccb23a4 |
⬇️ Download |
OrangeFox R12.0 Unofficial |
Community — Custom Recovery Ramdisk Image | Android 13.0 / 14.0 | 128 MB | c8d451a44e99f018e6928e469b841a12 |
⬇️ Download |
Browse all global regional releases and custom recovery archives for Xiaomi Pad 5 on AndroidFirmwareFile.com → View full archive on AndroidFirmwareFile.com →
Virtual A/B Partition Notes & Recovery Options
The Xiaomi Pad 5 (hardware codename 'nabu', models 21051182G and 21051182C) runs on the 7nm Qualcomm Snapdragon 860 octa-core processor with an Adreno 640 GPU, an 11.0-inch 120Hz WQHD+ IPS display, and an 8,720 mAh battery with 33W fast charging.
For full partition restoration and unbricking on unlocked devices, use Mi Flash Tool with the official factory Fastboot archive nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz. For locked units needing recovery without data loss, sideload the official Recovery ZIP via Mi Assistant.
Troubleshooting Xiaomi Pad 5 Flashing & Fastbootd Issues
FAILED (remote: 'Partition not found') When Running "fastboot flash recovery"
The Xiaomi Pad 5 uses a Virtual A/B partition scheme where the recovery ramdisk lives inside boot.img; there is no physical recovery partition on the hardware. Never flash to recovery. Instead, boot the image temporarily using "fastboot boot <recovery>.img" or flash directly to the active boot partition via "fastboot flash boot <recovery>.img".
Mi Flash Instant "Success" at 0–3 Seconds Without Actually Flashing
This happens when the folder path contains spaces (e.g. C:\Users\My Tablet\Downloads\nabu), exceeds Windows MAX_PATH limits, or when the .tgz archive was not unpacked twice with 7-Zip. Move the extracted folder directly to C:\nabu_fw\ and select that top folder containing flash_all.bat in Mi Flash.
Fastbootd Super Partition Allocation Timeout: "remote: 'Write to device failed'"
The HyperOS super partition is multi-gigabyte and writes across dynamic partitions. AMD Ryzen motherboard USB 3.0 controllers or front-panel USB ports can drop packets during heavy data transfer. Switch to a native rear USB 2.0 port on your motherboard and ensure Google Android SDK Platform-Tools is updated to the latest revision.
System Freeze on Boot: "The MIUI version can't be installed on this device"
This occurs when flash_all_lock.bat is executed on a tablet running mismatched regional firmware (such as locking an EEA or Global ROM on Chinese 21051182C hardware). Always select "clean all" (flash_all.bat) in Mi Flash Tool to keep the bootloader unlocked during cross-regional software installations.
For complete firmware error resolutions and troubleshooting: Fastboot Error Directory →
Xiaomi Pad 5 Flashing & Workshop Troubleshooting FAQ
Yes. If a root module causes a bootloop on Xiaomi HyperOS, you do not need to wipe data or reflash the full firmware. Extract boot.img directly from your matching Fastboot package, reboot the Pad 5 into Fastboot mode, and run "fastboot flash boot boot.img". This restores the stock kernel and uninstalls root hooks while leaving all user applications and storage intact.
The official Xiaomi.eu community development pipeline explicitly excludes tablet platforms—including the Xiaomi Pad 5 (nabu), Pad 5 Pro (elish/enuma), and Pad 6 series. Xiaomi's Pad edition software relies on specialized MIUI/HyperOS Pad framework patches, unique tablet split-screen navigation, and proprietary stylus/docking subsystems that the phone-centric Xiaomi.eu translation team does not maintain. Users seeking debloated or custom firmware on nabu typically use community AOSP ROMs (such as LineageOS or EvolutionX) or debloat stock HyperOS.
Yes. If your bootloader is locked and the tablet is stuck on the MI boot logo, you cannot run Fastboot flashing scripts, but you can sideload an official signed Recovery ZIP through stock Mi Recovery. Power off the tablet, hold Volume Up + Power until Mi Recovery opens, select "Connect with MIAssistant", connect via USB to your computer running Xiaomi PC Suite / Mi Assistant, and choose the matching regional Recovery ZIP (such as miui_NABUEEAGlobal_OS1.0.6.0.TKXEUXM_d2d151c706_13.0.zip) to reinstall system partitions without unlocking the bootloader.
When the Pad 5's 8,720 mAh battery remains depleted for an extended period, its internal battery protection circuit triggers a low-voltage cutoff. In this state, connecting high-wattage fast chargers will not initiate charging because the power negotiation chip requires minimum baseline voltage. Connect the tablet to a low-power 5V/1A or 5V/2A standard USB wall plug or computer USB port and leave it uninterrupted for 30 to 45 minutes. Once the trickle charge raises battery voltage above the safety threshold, the charging battery icon will appear on screen.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.