Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi 10A / Redmi 10A Sport
The Xiaomi Redmi 10A / Redmi 10A Sport was introduced in March 2022 as an updated budget smartphone powered by the MediaTek Helio G25 MT6762G (12nm TSMC) processor, featuring a 6.53-inch HD+ Dot Drop display, 5000 mAh battery, and rear fingerprint security. This guide provides step-by-step restoration procedures for recovering from bootloops, unbricking MediaTek VCOM ports, and installing clean factory software using official Fastboot images.
Because the Xiaomi Redmi 10A / Redmi 10A Sport uses the dandelion_c3l2 board with an updated touchscreen digitizer and rear fingerprint IC, it requires firmware packages carrying the RCZ MIUI identifier. This walkthrough details driver configuration, flashing via Mi Flash Tool, and patching vbmeta for custom recoveries.
Which Flash Mode Should You Use?
Fastboot Mode
Primary protocol for flashing official stock Fastboot TGZ packages using Mi Flash Tool or the fastboot command line.
Stock Mi Recovery 5.0
Factory recovery interface for installing official recovery OTA ZIP update packages and performing factory resets.
Custom Recovery (TWRP / OrangeFox)
Custom recovery environment for installing GSI ROMs, creating full partition backups, and flashing root packages.
MediaTek BROM Emergency Download
Low-level hardware recovery mode used by MediaTek boot ROM when the bootloader is completely bricked.
Pre-Flash Hardware Checks & MediaTek Driver Setup
Ensure your phone holds at least 50% charge to prevent sudden power loss while writing system partitions to eMMC memory.
Use a native rear USB 2.0 motherboard port on Windows 10 or 11 to avoid connection dropouts caused by front-panel USB hubs.
Connect with a reliable data-capable Micro-USB cable that maintains a steady handshake during heavy image transfers.
Fastboot flashing requires an officially unlocked bootloader tied to your authorized Xiaomi Mi account.
Install signed MediaTek USB VCOM and Android Bootloader Interface drivers so Windows recognizes the handset.
5-Step Fastboot & Mi Flash Walkthrough for dandelion_c3l2
5-step quick reference for the Xiaomi Redmi 10A / Redmi 10A Sport. Need visuals or troubleshooting help? The full Mi Flash Tool guide covers everything in detail.
-
Unlock bootloader using official Xiaomi Mi Unlock tool after waiting period
-
Decompress dandelion_c3l2_eea_global_images_V12.5.18.0.RCZEUXM_20240827.0000.00_11.0_eea_0ec4b20435.tgz with 7-Zip to C:\redmi10a_fw
-
Reboot handset into Fastboot mode and confirm Android Bootloader Interface driver detection
-
Select clean all script in Mi Flash to prevent bootloader relocking and protect NVData
-
Flash dynamic super partition and resolve any BROM port loops via battery reset
Fastboot Script & MediaTek Scatter Overview
Official Fastboot firmware packages for the Xiaomi Redmi 10A and Redmi 10A Sport (dandelion_c3l2) are deployed using the flash_all.bat batch script via Mi Flash Tool. In low-level repair scenarios, partition flashing relies on the MediaTek MT6762_Android_scatter.txt descriptor file.
flash_all.bat
Xiaomi official Fastboot firmware for the Redmi 10A uses flash_all.bat to write raw partition images through the Android fastboot protocol. For direct MediaTek SP Flash Tool flashing, MT6762_Android_scatter.txt maps partition offsets across eMMC storage.
Always verify that your package carries the RCZ identifier (such as dandelion_c3l2_eea_global_images_V12.5.18.0.RCZEUXM_20240827.0000.00_11.0_eea_0ec4b20435.tgz). Flashing standard Redmi 9A QCD firmware will disable the touchscreen and fingerprint scanner.
Xiaomi Redmi 10A / Redmi 10A Sport Firmware Versions
Below are tested official Xiaomi Fastboot firmware packages for the Redmi 10A and Redmi 10A Sport. These builds feature the RCZ identifier required for dandelion_c3l2 hardware.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V12.5.18.0.RCZEUXM |
EEA (Europe) | Android 11.0 (MIUI 12.5) | 4.4 GB | 0ec4b204351ee0c467a1e45cbdecafc1 |
β¬οΈ Download |
V12.5.16.0.RCZMIXM |
Global | Android 11.0 (MIUI 12.5) | 4.6 GB | f90c3c88a383789e18087d76c082ce52 |
β¬οΈ Download |
V12.5.18.0.RCZINXM |
India | Android 11.0 (MIUI 12.5) | 3.6 GB | fc5849433b75d160fc7ebcc126a4f4ea |
β¬οΈ Download |
V12.5.13.0.RCZCNXM |
China | Android 11.0 (MIUI 12.5) | 3.9 GB | 028f995807e7b219e8c3797104652e4d |
β¬οΈ Download |
Need additional regional releases, Recovery OTA builds, or custom recoveries? View the complete Redmi 10A firmware archive on AndroidFirmwareFile
Helio G25 Partition Architecture & Sibling Rules
The Xiaomi Redmi 10A (codename dandelion_c3l2) utilizes a System-as-Root (SAR), non-A/B partition layout with dynamic partitions. The physical super partition houses system, vendor, and product sub-volumes.
Fastboot Flashing Overview
To flash official stock firmware via Mi Flash Tool, extract the .tgz archive to a root directory such as C:\redmi10a_fw. Connect the phone in Fastboot mode (Volume Down + Power), ensure "clean all" is selected at the bottom of Mi Flash, and initiate the flashing process.
Custom Recovery & AVB 2.0 Considerations
When installing custom recoveries like TWRP 3.7.0 by brigudav or OrangeFox, you must flash a patched vbmeta.img with verification disabled:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img\nfastboot flash recovery twrp-3.7.0_11-0-dandelion-brigudav.img
Reboot directly from Fastboot into recovery mode using Volume Up + Power to prevent stock MIUI from restoring the original recovery image.
Troubleshooting Redmi 10A Mi Flash & Fastboot Errors
ERROR_PANEL_TOUCH_MISMATCH
If the touchscreen is completely unresponsive after booting into a custom recovery or newly flashed system, an incompatible touch digitizer driver was loaded. The Redmi 10A uses an updated display IC compared to the older Redmi 9A. Ensure you are flashing TWRP 3.7.0 compiled by brigudav or official dandelion_c3l2 firmware carrying the RCZ MIUI code.
FAILED_SPARSE_WRITE_TIMEOUT
During Mi Flash execution, transferring large sparse image chunks to eMMC storage can time out if connected to unstable front-panel USB ports or through loose hubs. Move the Micro-USB cable directly to a rear motherboard USB 2.0 port and extract the firmware to a top-level directory like C:\redmi10a_fw to prevent path length errors.
BROM_POWER_LATCH_FREEZE
If the handset becomes caught in an infinite connect and disconnect cycle in MediaTek USB Port (VCOM) mode and refuses to respond to Fastboot button combinations, the MT6762G power latch registers have frozen. Either leave the phone unplugged until the 5000 mAh battery fully drains, or carefully disconnect the internal battery flex connector for 2 minutes to clear the hardware latch before re-entering Fastboot.
VERITY_BOOT_CHECK_HALT
When flashing custom recovery onto an Android 11 MIUI stock kernel, Android Verified Boot (AVB 2.0) detects partition modifications and refuses to boot. You must patch vbmeta by executing "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" from the matching stock Fastboot package before booting custom recovery.
Hardware failure resolutions and practical fixes for common errors encountered when flashing the Redmi 10A and Redmi 10A Sport. Flashing Error Solutions β
Frequently Asked Questions About Flashing dandelion_c3l2
When Windows fails to bind the Google Android Bootloader Interface driver to the handset, the device list stays blank. Open Device Manager, locate Android under Other Devices with a yellow warning triangle, and manually update the driver to the signed Android Composite ADB Interface.
No. In official Fastboot mode, flashing signed partition images via flash_all.bat strictly requires an officially unlocked bootloader. If your device is locked and bricked, flashing requires MediaTek BROM mode with an authorized service account or specialized MTK auth bypass utilities.
Power off the phone completely. Press and hold Volume Up and the Power button simultaneously. As soon as the white Redmi logo appears on the display, release the Power button while continuing to hold Volume Up until the Main Menu of Mi Recovery 5.0 appears on screen.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.