Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Redmi Note 14 Pro 4G
The Redmi Note 14 Pro 4G, launched in 2025 on the MediaTek Helio G100-Ultra (MT6789, 6nm) platform, is a versatile 4G smartphone featuring a 200 MP camera and a 120Hz AMOLED display. Whether you need to restore your phone from an unexpected bootloop, clear system glitches after a major HyperOS update, or return to clean factory software, this guide provides verified Fastboot flashing instructions.
Official software restoration on the Redmi Note 14 Pro 4G is performed using Xiaomi Mi Flash Tool with stock Fastboot TGZ packages. Follow each preparatory step carefully to ensure smooth partition installation without risking bootloader lockouts.
Which Flash Mode Should You Use?
Fastboot Mode (Mi Flash Tool)
Standard official flashing interface for unlocked Xiaomi devices via flash_all.bat.
Stock Mi Recovery Mode
Stock recovery interface used to perform factory data wipes and clear encryption corruption.
MediaTek BROM / Preloader Mode
Emergency hardware mode used when the phone is hard-bricked and cannot enter Fastboot.
Essential Equipment & Mi Flash Preparation
Ensure your phone holds at least 50% charge to prevent sudden shutdowns during super partition writing.
Your bootloader must be officially unlocked via Mi Unlock before Fastboot partition scripts can execute.
Download obsidian_eea_global_images_OS3.0.303.0.WOFEUXM.tgz and extract it to C:\obsidian.
Use the original Xiaomi 6A cable connected directly to a rear motherboard USB 2.0 port.
Install Xiaomi Android Bootloader drivers and Android SDK Platform-Tools v35+ for large sparse chunk support.
Executing flash_all.bat formats internal storage. Back up all vital files before flashing.
5-Step Mi Flash Tool Walkthrough for obsidian
A fast reference for flashing the Redmi Note 14 Pro 4G (Helio G100-Ultra) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Download obsidian_eea_global_images_OS3.0.303.0.WOFEUXM.tgz
-
Extract TGZ Package Twice to Root C:\obsidian
-
Boot into Fastboot Mode via Volume Down + Power
-
Connect via Rear USB 2.0 Port and Select "clean all"
-
Click Flash and Wait for Success Status
Firmware Package Details for Redmi Note 14 Pro 4G
Official firmware for the Redmi Note 14 Pro 4G (obsidian) is distributed as compressed Fastboot TGZ archives containing raw partition binaries and automated batch scripts (flash_all.bat, flash_all_except_storage.bat, and flash_all_lock.bat).
flash_all.bat
Xiaomi Fastboot packages contain raw partition images that are written block-by-block to internal UFS storage using official automated shell and batch scripts.
Bootloader Lock Warning: When flashing via Mi Flash Tool, always select "clean all" at the bottom right. Never select "clean all and lock" if your phone is running cross-regional software, as locking an unauthorized regional firmware will permanently brick the device.
Additional Redmi Note 14 Pro 4G Firmware Builds
Need additional regional builds, older maintenance releases, or recovery OTA packages for the Redmi Note 14 Pro 4G?
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS3.0.303.0.WOFEUXM |
Android 16.0 (HyperOS) | 7.5 GB | 18602d9d549a08ffbcb384567fed4508 |
β¬οΈ Download | |
OS3.0.305.0.WOFMIXM |
Android 16.0 (HyperOS) | 8.6 GB | caf2b5097e46da19619df78e312b3e52 |
β¬οΈ Download | |
OS3.0.303.0.WOFRUXM |
Android 16.0 (HyperOS) | 8.6 GB | 58c4b530d37d06ac2f9113c48df182ee |
β¬οΈ Download |
Browse the complete technical repository on AndroidFirmwareFile: View all Redmi Note 14 Pro 4G packages on AndroidFirmwareFile.com β
Helio G100-Ultra & HyperOS Dynamic Partition Advisories
When flashing the Redmi Note 14 Pro 4G (obsidian), keep the following hardware safety guidelines in mind:
- Unlocked Bootloader Required: Fastboot flashing via flash_all.bat requires an officially unlocked bootloader. Attempting to flash partitions on a locked bootloader will result in "FAILED (remote: Not allowed in locked state)".
- Archive Extraction: TGZ packages are double-compressed archives. Unpack the .tgz archive using 7-Zip to reveal the .tar file, then unpack the .tar file to expose the root folder containing
flash_all.batand theimagessubfolder. - Short File Path: Move the extracted folder to a short path on your primary drive (such as
C:\obsidian). Paths containing spaces, long directory trees, or non-English characters cause Mi Flash to fail silently during execution. - Native USB 2.0 Port: Always connect your original Type-C data cable directly to a rear motherboard USB 2.0 port. USB 3.0 controller hubs frequently cause packet loss during large dynamic super partition transfers.
Redmi Note 14 Pro 4G Fastboot & Mi Flash Troubleshooting
error: cannot load "super.img": data too large / chunk timeout
HyperOS super partition images on the Helio G100-Ultra platform exceed 7 GB and are written in large sparse chunks. If Mi Flash or the terminal halts during super partition writing, ensure you are using Google Android SDK Platform-Tools v35.0.0 or newer. Older fastboot binaries lack large sparse chunk transfer protocols and fail during dynamic partition writes.
Anti-Rollback (ARB) Protection: Current version is lower than device index
Xiaomi enforces hardware anti-rollback fuses on MediaTek MT6789 platforms. Before downgrading, verify your device index by running "fastboot getvar anti" in terminal. If the target firmware index is lower than the hardware fuse value, flashing will be rejected to protect the bootloader from bricking.
error: flash_all.bat not found / mismatched directory depth
This happens when pointing Mi Flash Tool directly to the inner "images" subfolder rather than the extracted root folder. Point Mi Flash to the parent folder containing flash_all.bat and the images directory (such as C:\obsidian). Avoid folder paths containing spaces or non-ASCII characters.
Encountering issues while flashing your Redmi Note 14 Pro 4G? Consult our verified solutions below for super partition timeouts, ARB checks, and Mi Flash script errors. Troubleshooting & Error Guide β
Redmi Note 14 Pro 4G Workshop Troubleshooting FAQ
This is an advisory notice, not a failure. Newer HyperOS fastboot scripts do not return standard checkpoint tokens to older Mi Flash Tool versions. If the status bar reached 100% and the device rebooted with the HyperOS logo, the flash was completely successful.
By default, Mi Flash Tool highlights the "clean all and lock" option at the bottom right of the window. Always manually select "clean all" (which executes flash_all.bat without flash_all_lock.bat). Locking the bootloader on cross-regional software (e.g., flashing Global firmware on a Chinese-origin unit) will trigger "This MIUI version can't be installed on this device" and brick the handset.
This error is caused by lingering file-based encryption (FBE) metadata left on the userdata partition from a previous build. Boot into stock Mi Recovery by holding Volume Up and Power, select "Wipe Data", choose "Wipe All Data", and confirm with the Power button to format storage cleanly.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.