Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi Note 15 Pro 4G
The Xiaomi Redmi Note 15 Pro 4G (codename: charoite) launched with MediaTek's MediaTek Helio G200-Ultra (6nm TSMC) processor, a 120Hz AMOLED display under Gorilla Glass Victus 2, and a 6,500 mAh battery with 45W charging.
Whether you need to fix a bootloop using charoite_eea_global_images_OS3.0.303.0.WPFEUXM_20260821.0000.00_16.0_eea_13a0277dc8.tgz or sideload an intact OTA package on a locked bootloader, follow the instructions below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot / fastbootd ROM)
Official full-restore path running flash_all.bat over userspace fastbootd to rewrite boot, init_boot, vendor_boot, super.img, and userdata. Requires an unlocked bootloader.
Mi Assistant (Recovery Sideload)
Stock recovery sideloading for locked bootloaders using signed OTA ZIP builds like charoite_eea_global-ota_full-OS3.0.303.0.WPFEUXM-user-16.0-8b2911760a.zip.
Fastboot CLI & MediaTek BROM (Advanced / Auth)
Manual fastboot getvar / slot controls on unlocked units, or authorized BROM emergency mode on Helio G200-Ultra hardware (enforces SLA/DA authentication).
Essential Setup Before Flashing 8.8GB+ HyperOS 3.0 Files
Fastboot .tgz writes require Xiaomi Community unlock authorization; locked phones should use Mi Assistant with the Recovery ZIP.
Install Xiaomi/MTK drivers and Google Platform-Tools v35.0.0+ so 8.8GBβ9.7GB HyperOS 3.0 super.img writes never time out.
Attach directly to a rear motherboard USB 2.0 socket to eliminate USB 3.x xHCI controller timeouts during fastbootd handoffs.
Verify strong charge on the 6,500 mAh battery before starting large 8.8GB+ Virtual A/B super partition writes.
Running flash_all.bat wipes internal UFS 2.2 storage completely. Copy photos and important files off the phone beforehand.
Mi Flash & Fastbootd Walkthrough for Note 15 Pro 4G
A fast reference for flashing the Xiaomi Redmi Note 15 Pro 4G (Helio G200-Ultra) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Confirm unlocked bootloader (or use Mi Assistant OTA ZIP if still locked)
-
Extract charoite_eea_global_images_OS3.0.303.0.WPFEUXM_20260821.0000.00_16.0_eea_13a0277dc8.tgz twice to C:\charoite_fw\
-
Install Google Platform-Tools v35+ and Xiaomi/MediaTek drivers on 64-bit Windows
-
Enter Fastboot (Volume Down + Power) and connect directly to a rear USB 2.0 port
-
Select C:\charoite_fw\ in Mi Flash Tool, confirm "clean all", and flash
Finding flash_all.bat Inside Helio G200-Ultra Packages
Official Redmi Note 15 Pro 4G Fastboot packages arrive as double-compressed .tgz files. Unpacking twice with 7-Zip puts flash_all.bat at the outer level alongside the images directory containing preloader, boot, init_boot, vendor_boot, and the 8.8GB+ dynamic super.img:
flash_all.bat
Extracting charoite_eea_global_images_OS3.0.303.0.WPFEUXM_20260821.0000.00_16.0_eea_13a0277dc8.tgz twice with 7-Zip places flash_all.bat at the top directory beside the images folder containing preloader, boot, vendor_boot, and super.img. Point Mi Flash Tool to that outer directory.
Codename charoite (model 25100RA69G) covers ONLY the Helio G200-Ultra Redmi Note 15 Pro 4G (WPF builds). Never cross-flash Note 15 4G (spinel) or Note 15 Pro 5G (lapis) files.
Select the outer directory holding flash_all.bat inside Mi Flash Tool (for example C:\charoite_fw\), never inside the images subfolder.
Always choose "clean all" (flash_all.bat); picking "clean all and lock" on cross-regional software will lock up startup.
Xiaomi Redmi Note 15 Pro 4G Firmware Versions
Verified EEA Fastboot & Recovery builds alongside Global Fastboot for the Xiaomi Redmi Note 15 Pro 4G (charoite). Visit the full archive below for Russia and Turkey HyperOS 3.0 releases.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS3.0.303.0.WPFEUXM |
Europe / UK EEA (EU) β HyperOS 3.0 | Android 16.0, Aug 2026 | 8.8 GB | 13a0277dc8f32e21edd5774502c061ac |
β¬οΈ Download |
OS3.0.303.0.WPFEUXM (OTA) |
Europe / UK EEA Recovery ZIP | Android 16.0, Aug 2026 | 6.0 GB | 8b2911760a3eb8ffcbec50d7151633f7 |
β¬οΈ Download |
OS3.0.304.0.WPFMIXM |
Global (MI) β HyperOS 3.0 | Android 16.0, Sep 2026 | 9.7 GB | 884a674e9b43c17bd4b4d8b98018b92d |
β¬οΈ Download |
Browse all 8 HyperOS 3.0 EEA, Global, Russia & Turkey packages for charoite on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Fastbootd, Mi Assistant & Helio G200-Ultra Options
The Xiaomi Redmi Note 15 Pro 4G (codename charoite, model 25100RA69G) pairs MediaTek's 6nm Helio G200-Ultra with a 200 MP OIS main camera, Gorilla Glass Victus 2, and a 6,500 mAh battery.
With an unlocked bootloader, Mi Flash Tool executes flash_all.bat from charoite_eea_global_images_OS3.0.303.0.WPFEUXM_20260821.0000.00_16.0_eea_13a0277dc8.tgz or Global charoite_global_images_OS3.0.304.0.WPFMIXM_20260916.0000.00_16.0_global_884a674e9b.tgz over userspace fastbootd. Locked handsets can sideload charoite_eea_global-ota_full-OS3.0.303.0.WPFEUXM-user-16.0-8b2911760a.zip via stock Mi Recovery's Mi Assistant mode.
Fixing Redmi Note 15 Pro 4G Sparse Write, Path & Lock Errors
Fastbootd Log: "FAILED (remote: data too large)" or Write Stall on 8.8GB+ super.img
HyperOS 3.0 super.img images on Android 16 exceed 8.8 GB and use oversized sparse chunks inside userspace fastbootd. Older Platform-Tools or USB 3.x power-saving controllers drop packets during the fastboot -> fastbootd transition. Replace fastboot with Google Platform-Tools v35+ and plug into a rear USB 2.0 port.
Mi Flash Dialog: "flash_all.bat not found" or Path Too Deep
Triggered when pointing Mi Flash Tool at an unextracted .tar archive, a path with spaces, or inside the nested images folder. Unpack twice with 7-Zip directly into C:\charoite_fw\ and pick that outer folder.
Prompt: "Data is corrupted" After Reboot
Leftover Android 16 File-Based Encryption (FBEv2) metadata on userdata fails verification after switching HyperOS builds. Highlight "Wipe Data" in stock Mi Recovery with Volume Down, pick "Wipe All Data", and confirm with Power before rebooting.
Boot Freeze: "This MIUI version can't be installed on this device"
Caused by clicking "clean all and lock" (flash_all_lock.bat) on cross-regional firmware (such as flashing WPFEUXM onto a Global/Russian unit and relocking). Always keep "clean all" checked before flashing.
Need troubleshooting for another fastbootd or MediaTek code? Fastboot & Mi Flash Error Directory β
Preloader Timing, Anti-Rollback & 200 MP OIS Safety Q&A
MediaTek Preloader USB VCOM only listens for two to four seconds at startup before continuing boot, and HyperOS 3.0 enforces strict SLA/DA signature locks inside BROM. Locked units that still enter stock Mi Recovery (Volume Up + Power) should select "Connect with MIAssistant" and sideload charoite_eea_global-ota_full-OS3.0.303.0.WPFEUXM-user-16.0-8b2911760a.zip instead.
Open a terminal while connected in Fastboot mode and execute "fastboot getvar anti", then compare that integer with the anti-rollback index inside your extracted firmware's android-info.txt. Never flash a build carrying a lower index than your handset's hardware fuse.
Yes. Official flash_all.bat scripts skip formatting /persist, nvram, and nvdata during clean stock restores β keeping factory 200 MP optical stabilization data, under-display fingerprint calibration maps, and dual-SIM IMEI records intact.
If USB power slips while writing dynamic partitions, boot back to Fastboot (Volume Down + Power), execute "fastboot getvar current-slot", run "fastboot set_active a" (or "b") to stabilize the active boot target, and restart flash_all.bat.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.