Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi Note 8
This workshop manual provides tested stock firmware flashing procedures for the Xiaomi Redmi Note 8 (September 2019), built on the Qualcomm Snapdragon 665 SM6125 (11nm FinFET) processor with a dedicated recovery partition architecture. Whether restoring factory software after an update failure or unbricking a handset stuck in a bootloop, this walkthrough outlines official Fastboot flashing.
The ginkgo platform pairs Qualcomm's Snapdragon 665 SM6125 processor with eMMC 5.1 storage. Following the exact flashing steps and verifying firmware checksums ensures your device reboots reliably into clean official MIUI 12.5.
Which Flash Mode Should You Use?
Fastboot Mode
Standard bootloader flashing mode for Mi Flash Tool and command-line fastboot operations.
Stock Recovery Mode
Built-in recovery menu used for applying official recovery ZIP update packages and performing factory wipes.
Custom Recovery (TWRP / OrangeFox)
Touch-enabled custom recovery flashed to the dedicated recovery partition for custom ROMs, zips, and full NAND backups.
Qualcomm EDL Mode (9008)
Low-level Qualcomm Emergency Download mode for unbricking hard-bricked handsets with black screens.
Pre-Flash Hardware Checks & Qualcomm Driver Setup
Ensure your handset holds at least 50% battery capacity to prevent unexpected shutdown while writing multi-gigabyte system and vendor images.
Connect directly to a native USB 2.0 port on your computer motherboard to avoid USB 3.0 controller handshake dropouts during Fastboot operations.
Use an official or certified USB data cable capable of sustained data transfer during full firmware flash operations.
Fastboot flashing via Mi Flash Tool requires an officially unlocked bootloader through Xiaomi's Mi Unlock desktop software.
Use 7-Zip to extract TGZ archives twice down to the bare directory containing flash_all.bat without folder path nesting.
When flashing custom recoveries like TWRP or OrangeFox, flash vbmeta with disabled verification to prevent AVB 2.0 bootloops.
5-Step Fastboot & Mi Flash Walkthrough for ginkgo
A fast reference for flashing the Xiaomi Redmi Note 8 (Snapdragon 665) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Unlock bootloader with Mi Unlock and check Anti-Rollback index via fastboot getvar anti
-
Extract ginkgo_eea_global_images_V12.5.12.0.RCOEUXM_20221127.0000.00_11.0_eea_fdd5e37d21.tgz using 7-Zip
-
Boot handset into Fastboot mode with Volume Down + Power and verify Qualcomm interface
-
Load firmware into Mi Flash Tool and ensure clean all flash_all.bat is selected
-
Execute flash to write physical partitions and monitor eMMC 5.1 data transfer
Fastboot Script & Qualcomm Partition Architecture
Official Fastboot ROM packages for the Xiaomi Redmi Note 8 (ginkgo) use flash_all.bat to write partitions over USB. Unlike MediaTek devices that require a scatter file, Qualcomm Snapdragon Fastboot packages use raw program and patch XML files executed by fastboot or Mi Flash Tool.
flash_all.bat
Xiaomi Fastboot packages for Qualcomm Snapdragon handsets include automated batch scripts for Windows (flash_all.bat) and shell scripts for Linux/macOS. These scripts parse partition definitions and flash images directly to physical blocks.
Always verify your device reports codename ginkgo before flashing. Never flash packages meant for the MediaTek-based Redmi Note 8 2021 (biloba) or attempt to lock the bootloader on cross-regional handsets.
Verified Fastboot Packages for Redmi Note 8 (ginkgo)
Official Fastboot ROM packages for the Redmi Note 8 (ginkgo) are listed below. Each package is verified for clean factory restoration.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V12.5.12.0.RCOEUXM |
EEA (Europe) | 11.0 | 4.56 GB | fdd5e37d2121b84f630ff4efdd5cd7f5 |
β¬οΈ Download |
V12.5.2.0.RCOMIXM |
Global | 11.0 | 4.71 GB | da0a599e0c674874b38f648c979fb808 |
β¬οΈ Download |
V12.5.5.0.RCOCNXM |
China | 11.0 | 4.09 GB | 5c9c74ecd8d936a491978f54de9efb80 |
β¬οΈ Download |
V12.5.5.0.RCOCNXM_v12-11 |
Europe / Multilingual (Xiaomi.eu) | 11.0 | 2.79 GB | 3ad02528a9a6421bfd98e72849aea145 |
β¬οΈ Download |
3.7.1_12-0 |
Global (Official TWRP) | 11.0 / 12.0 | 64.0 MB | e73375e2900c678798fe004bb5079993 |
β¬οΈ Download |
Looking for additional regional builds, historical MIUI versions, or custom recovery packages? Browse the complete archive on AndroidFirmwareFile
Dedicated Recovery Partition & Snapdragon 665 Flashing Notes
The Xiaomi Redmi Note 8 (ginkgo) utilizes a traditional non-A/B System-as-Root partition architecture with a dedicated physical recovery block. Fastboot packages such as ginkgo_eea_global_images_V12.5.12.0.RCOEUXM_20221127.0000.00_11.0_eea_fdd5e37d21.tgz transfer partition images directly into the internal eMMC 5.1 storage via Fastboot protocol. Ensure a stable rear motherboard USB connection throughout the procedure to prevent partition write dropouts.
Troubleshooting Redmi Note 8 Flashing Issues
error: cannot load 'recovery.img': No such file or directory
This error occurs in command line when Fastboot cannot locate the target recovery image file. Make sure your command prompt terminal is opened directly inside the folder containing twrp-3.7.1_12-0-ginkgo.img, or provide the full absolute file path in quotes when executing fastboot flash recovery.
FAILED (remote: 'Anti-rollback check failed')
Xiaomi bootloader protection halts the flashing routine when attempting to flash a build with an Anti-Rollback index lower than the version currently recorded in the device hardware fuse. Check your current index via "fastboot getvar anti" and only flash firmware matching or exceeding that baseline.
Qualcomm HS-USB Diagnostics 900E instead of 9008 Handshake
When attempting to enter emergency download mode via motherboard test points, the device may fall into Qualcomm 900E diagnostic mode if the battery is connected or the USB handshake times out. To fix this, disconnect the battery flex cable completely, short the two test points firmly with tweezers, and plug in the USB-C cable to force Qualcomm HS-USB QDLoader 9008 mode.
dm-verity corruption: Your device is corrupt and cannot be trusted
Android Verified Boot (AVB 2.0) flags altered system or recovery partitions when the stock kernel attempts to verify cryptographic signatures. If you install TWRP or OrangeFox and encounter this error, flash vbmeta with verification disabled using "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to allow the system to boot.
Encountered an issue during flashing? Review our tested fixes for common Qualcomm Snapdragon 665 flashing errors below. Troubleshooting & Error Guide β
Flashing Workshop & Recovery Troubleshooting FAQ
This common issue happens when the extracted firmware folder path contains spaces, special characters, or is nested inside an extra subfolder. Mi Flash executes flash_all.bat through Windows command line, which fails silently if the path has spaces. Move the firmware folder directly to C:\ginkgo_fw and ensure the images subfolder sits right next to flash_all.bat.
The Redmi Note 8 uses a dedicated physical partition (/dev/block/bootdevice/by-name/persist) that stores factory calibration data for the Samsung GM1 48 MP sensor, optical white balance, and Bluetooth/Wi-Fi MAC addresses. Never execute "fastboot erase persist" or flash modified persist images, as doing so permanently breaks camera focus and sensor functionality.
Stock MIUI kernels automatically replace custom recoveries with the stock recovery on the next normal system boot. After executing "fastboot flash recovery twrp-3.7.1_12-0-ginkgo.img", do not let the device boot into Android. Instead, immediately run "fastboot reboot" while holding the Volume Up button until the custom recovery splash screen appears.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.