Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Huawei Y5 2018
The Huawei Y5 2018, launched in 2018, runs on the MediaTek MT6739 (28nm) processor. While routine system maintenance can be handled through Huawei's native dload recovery workflow, recovering from soft-bricks or bootloops requires matching your exact hardware branch.
This workshop guide walks technicians through flashing official stock firmware on the Huawei Y5 2018, covering both the on-device dload SD card update method and low-level SP Flash Tool scatter unbricking.
Which Flash Mode Should You Use?
Huawei Dload 3-Button SD Update
The standard factory update method for the Y5 2018. Reads UPDATE.APP from the /dload folder on a FAT32 microSD card and writes factory partitions via stock recovery. Does not require an unlocked bootloader.
SP Flash Tool (Scatter Flashing)
Low-level MediaTek service flashing via BootROM / Preloader mode. Used for unbricking hard-bricked devices or recovering when recovery mode is inaccessible.
Huawei eRecovery Mode
Stock bootloader emergency Wi-Fi recovery interface for automated system restoration over Wi-Fi.
What You Need Before Flashing
Charge the 3020mAh battery to at least 50% to prevent unexpected shutdowns during partition flashing.
Use a reliable microSD card formatted as FAT32 MBR with a root-level folder named "dload".
Use an authentic microUSB 2.0 cable connected directly to a rear PC motherboard port.
Install verified MediaTek MTK VCOM USB drivers on Windows 10 or 11 with driver signature enforcement disabled if required.
Check the exact DRA-* code on your SIM tray or recovery menu to select the proper 2GB or 1GB firmware.
How to Flash the Huawei Y5 2018 β Quick Overview
A condensed step-by-step summary specific to the Huawei Y5 2018. Follow the full Huawei UPDATE.APP guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Download Matching DRA Package
-
Format FAT32 MicroSD Card
-
Copy UPDATE.APP File
-
Trigger 3-Button Combination
-
Complete First Boot Rebuild
Firmware Package & Architecture for MT6739
Official Huawei stock firmware packages for the Y5 2018 (DRA) are distributed as UPDATE.APP container archives for on-device dload restoration, or as extracted MT6739 scatter files for low-level service flashing.
UPDATE.APP
Huawei packages for this MT6739 device use an UPDATE.APP archive for recovery installations or a scatter.txt file mapping partitions for SP Flash Tool.
Verify whether your device is a standard 2GB RAM model (DRA-L21, DRA-L22) or a 1GB RAM Y5 Lite model (DRA-LX5, DRA-L42). Do not interchange packages between these hardware classes.
Huawei Y5 2018 Firmware Versions
Official stock firmware Dload builds for the Huawei Y5 2018. Verify your hardware model variant and regional cust identifier before initiating installation.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
1.0.0.154 (C432) β DRA-L21 European Dual-SIM |
Europe Open Market (C432) | Android 8.1.0 (EMUI 8.0) | 1.57GB | β | β¬οΈ Download |
1.0.0.143 (C185) β DRA-LX5 Y5 Lite Android Go |
Middle East & Africa (C185) | Android 8.1.0 (Go Edition) | 752MB | β | β¬οΈ Download |
1.0.0.111 (C00) β DRA-AL00 Enjoy 8e Youth |
China All-Netcom (C00) | Android 8.1.0 (EMUI 8.0 China) | 1.3GB | β | β¬οΈ Download |
Need firmware for Middle East (C185), Latin America (C25/C469), China Enjoy 8e Youth, or Y5 Lite (1GB Android Go)? Browse the full archive on AndroidFirmwareFile.com →
Huawei Y5 2018 β Important Notes
For devices that are fully unresponsive on USB or fail to trigger the 3-button dload combination, a testpoint connection on the motherboard can force MediaTek USB COM port detection for SP Flash Tool recovery.
Troubleshooting Huawei Y5 2018 Flashing & MT6739 Errors
S_BROM_CHKSUM16_MEM_RESULT_DIFF (0x40B)
Community repair discussions indicate this error occurs in SP Flash Tool when the MediaTek bootrom rejects the DA checksum handshake on secure MT6739 bootloaders. Technicians suggest using an MTK auth bypass utility or loading the OEM-specific DA agent.
Software install failed (Incompatible Partition Table)
Repair forum members report this error during SD card dload when attempting to flash an Honor 7S (DUA) package on a Huawei Y5 (DRA) board, or when cross-flashing 1GB Android Go firmware onto a 2GB EMUI phone. Always match the exact board platform identifier.
Encountering installation aborts, SD card detection failures, or cust verification errors? Consult the comprehensive troubleshooting directory: Dload Error Directory β
Frequently Asked Questions β Huawei Y5 2018
This error indicates a mismatch in the MediaTek Download Agent (DA) memory checksum verification. Huawei MT6739 boards require using the specific DA agent (MTK_AllInOne_DA.bin) with authentication bypass or choosing the "Download Only" mode without attempting to format protected NVRAM partitions.
This error occurs when the UPDATE.APP file does not match your device's regional cust (e.g. attempting to install C432 European software on a C185 Middle Eastern board) or if you are flashing standard 2GB EMUI software onto a 1GB Y5 Lite model. Confirm your board code and region cust before copying the file.
Ensure the phone is powered completely off. Press and hold Volume Up and Volume Down together, then press and hold the Power button. Keep holding all three buttons until the circular EMUI update progress screen appears on display.
When using SP Flash Tool with an MT6739 scatter dump, always select "Download Only" mode and uncheck the `preloader` and `nvram` partitions. Never use "Format All + Download", as formatting will permanently erase your unique factory RF calibration data and IMEI numbers.
Ready to Flash?
Follow the full step-by-step Huawei UPDATE.APP guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.