Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi 15S Pro
This workshop guide provides step-by-step bench instructions to flash official stock Fastboot firmware to the Xiaomi 15S Pro (April 2025) using Mi Flash Tool. Writing multi-gigabyte system and dynamic super partitions to Xiaomi's Xiaomi Xring O1 / Xuanjie O1 (3nm TSMC) platform over UFS 4.1 storage requires stable USB driver handshakes and correct batch script selection.
Whether your phone is trapped in a startup bootloop, recovering from corrupted partitions, or returning to clean official HyperOS 3.0 (Android 16.0), follow the verified prerequisites, 6100 mAh battery precautions, and step-by-step flashing procedures detailed below.
Which Flash Mode Should You Use?
Xiaomi Mi Flash Fastboot Flashing (Recommended)
Standard official method for restoring stock HyperOS firmware using an unlocked bootloader and Mi Flash Tool in Fastboot mode.
Emergency Download Mode
Emergency download mode accessed via motherboard test points to revive hard-bricked devices unable to enter Fastboot.
Recovery Sideload & Local Update
Official recovery interface used for installing signed recovery update packages directly over USB or on-device storage.
What You Need Before Flashing
Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility.
A 64-bit Windows PC with Xiaomi USB drivers and updated Android SDK Platform Tools installed.
Ensure the 6100 mAh battery has at least 50% charge to prevent shutdown during sparse partition writes.
Use a certified USB Type-C 3.2 data sync cable plugged directly into a rear motherboard USB port.
Flashing stock Fastboot firmware with "clean all" completely wipes internal storage and applications.
Decompress the 9.1 GB .tgz archive twice using 7-Zip until flash_all.bat is exposed in a clean root directory.
How to Flash the Xiaomi 15S Pro β Quick Overview
These 5 steps are tailored to the Xiaomi 15S Pro (Xiaomi Xring O1). For screenshots, an interactive checklist, and troubleshooting, open the full Mi Flash Tool guide.
-
Unlock bootloader with Mi Unlock
-
Decompress Fastboot TGZ archive twice
-
Enter Fastboot mode
-
Configure Mi Flash Tool with "clean all"
-
Flash firmware and await first boot
Firmware Package for Xiaomi Xring O1 (flash_all.bat)
Official Fastboot firmware packages for the Xiaomi 15S Pro are distributed as multi-gigabyte .tgz archives containing raw partition binaries (boot.img, init_boot.img, vendor_boot.img, dtbo.img, vbmeta.img, and sparse super.img dynamic partitions) written via flash_all.bat and Qualcomm/Fastboot protocols across the Xiaomi Xring O1 UFS 4.1 storage controller.
flash_all.bat
Official Xiaomi 15S Pro firmware is distributed as multi-gigabyte .tgz archives. Extract the archive twice using 7-Zip until the folder containing "flash_all.bat" and the raw partition images is visible.
Fastboot Flashing Rule: Always select "clean all" (flash_all.bat) when using Mi Flash Tool on imported hardware to avoid triggering the "The system has been destroyed" lock brick.
Xiaomi 15S Pro Firmware Versions
Official stock firmware downloads for the Xiaomi 15S Pro. Verify your hardware model variant before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS3.0.304.0.WODCNXM (HyperOS 3.0) |
China (CN) | Android 16.0 | 9.1 GB | 8f9d5e3a8cde9908b0bc361f8cca4a6b |
β¬οΈ Download |
Want to check full phone specs, partition maps, and hardware details? View complete device details on AndroidFirmwareFile.com β
Xiaomi 15S Pro β Important Notes
The Xiaomi 15S Pro houses a large 6100 mAh internal Silicon-Carbon battery. Writing full HyperOS 3.0 dynamic super partition images takes approximately 4 to 6 minutes. Confirm that your battery has at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during partition writes.
Troubleshooting Xiaomi 15S Pro Flashing & HyperOS Errors
Fastbootd Re-enumeration Timeout: "FAILED (remote: 'fastbootd transport stalled or device not recognized')"
When flashing the massive 9GB+ dynamic super container on the custom Xring O1 platform, the device transitions from bootloader Fastboot into userspace fastbootd. If USB 3.2 ports with aggressive power-saving governors take longer than 10 seconds to re-bind the fastbootd interface, the flash script aborts. Workshop technicians suggest connecting directly to a rear motherboard USB port, running Mi Flash Tool as Administrator, and temporarily disabling Windows USB selective suspend.
Sibling Platform Mismatch: "FAILED (remote: 'Xring O1 hardware signature mismatch' or hard bootloop)"
Attempting to flash firmware meant for standard Snapdragon-based Xiaomi 15 models (such as dada or haotian) onto the 15S Pro (dijun) causes an immediate security abort or brick. Because the 15S Pro runs Xiaomi's in-house 3nm Xring O1 silicon rather than Snapdragon processors, partition trees and kernel binaries are completely incompatible. Technicians advise strictly verifying the device product name via "fastboot getvar product" before flashing.
Bootloader Relock Security Trap: "The system has been destroyed / dm-verity failed after flash_all_lock.bat"
Selecting "clean all and lock" (flash_all_lock.bat) when flashing modified software or custom recoveries causes the primary bootloader to command a hardware lock. MediaTek and Xring silicon validate the signed vbmeta image against hardware eFuses upon startup; if any hash mismatch is detected, the bootloader locks and immediately halts boot execution. Technicians advise always selecting "clean all" (flash_all.bat) without relocking.
For solving common Mi Flash Tool timeout codes, fastbootd transition delays, and HyperOS recovery issues: Xiaomi Flashing Error Directory β
Frequently Asked Questions β Xiaomi 15S Pro
To enter Fastboot mode: Turn off the phone completely. Press and hold Volume Down and Power buttons simultaneously for 5 to 6 seconds until the orange FASTBOOT graphic displays on the 6.73-inch screen, then plug in the USB cable. To enter Recovery mode: Turn off the phone, hold Volume Up and Power together until the Mi/HyperOS logo appears, then release the Power button while continuing to hold Volume Up until the stock recovery menu displays.
If the phone is trapped in an infinite bootloop, hold down the Power button firmly for 12 to 15 seconds until the 6.73-inch LTPO panel cuts to black to force a hardware PMIC cutoff. If the phone immediately reboots back into the loop, catch the power reset by holding Volume Down the moment the screen goes dark; this forces the bootloader to direct the boot sequence into Fastboot mode before HyperOS attempts to load.
On Android 16 HyperOS 3.0, the dynamic super partition is flashed via userspace fastbootd rather than legacy bootloader Fastboot. During the flash script execution, the device automatically reboots from bootloader Fastboot into fastbootd (displaying an English Fastbootd menu on screen). Do not disconnect the cable during this 10-second transition; Mi Flash Tool will re-enumerate the device and resume streaming the 9GB sparse chunks.
The 15S Pro (25042PN24C) is a Chinese domestic hardware model. If modified or ported software is flashed with flash_all_lock.bat, the bootloader validates the signed vbmeta image against hardware eFuses upon relocking. If any hash mismatch is detected, the bootloader locks and immediately halts at startup with "This MIUI/HyperOS version can't be installed on this device" or "The system has been destroyed". Technicians advise strictly selecting "clean all" (flash_all.bat).
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.