Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi 10
The Xiaomi Mi 10 (hardware codename umi, model numbers M2001J2G, M2001J2I, and M2001J2C) was launched in February 2020, built on the Qualcomm Snapdragon 865 5G (7nm) platform with an Adreno 650 GPU, 6.67-inch 90Hz curved Super AMOLED display, symmetric dual stereo speakers, quad rear cameras headed by a 108 MP Samsung HMX sensor, and a 4780 mAh battery supporting 30W wired charging.
This guide provides step-by-step instructions for flashing official stock Fastboot firmware on the Xiaomi Mi 10 using Xiaomi Mi Flash Tool. Whether you are fixing a phone stuck in a bootloop, resolving software bugs after an update, or restoring factory software, follow these verified instructions to flash safely.
Which Flash Mode Should You Use?
Xiaomi Mi Flash Tool (Fastboot)
Official flashing utility for unlocked Xiaomi devices. Writes partition images directly to storage over Fastboot mode.
Stock Recovery / Local Update
Official on-device recovery update method for installing signed Recovery ZIP packages without wiping personal data.
Custom Recovery (TWRP / OrangeFox)
Custom recovery environment for installing Xiaomi.eu custom ROMs, creating full NANDroid backups, and root management.
Essential Equipment & Driver Verification for umi
A 64-bit Windows 10/11 computer with official Qualcomm USB drivers and Android SDK Platform Tools.
An officially unlocked bootloader via the Xiaomi Mi Unlock utility is required for Fastboot partition flashing.
Ensure the 4780 mAh battery holds at least 50% charge to prevent unexpected power drops while writing 5GB+ super partition images.
Use an authentic data sync cable connected directly to a rear motherboard USB 2.0 port to prevent communication drops.
5-Step Mi Flash & Fastboot Restoration Walkthrough
A fast reference for flashing the Xiaomi Mi 10 (Snapdragon 865) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Decompress umi_eea_global_images_V14.0.2.0.TJBEUXM_20230517.0000.00_13.0_eea_0495336d47.tgz into C:\umi_fw
-
Hold Volume Down and Power buttons simultaneously for 10 seconds to engage orange Fastboot screen
-
Establish a direct motherboard USB 2.0 handshake and verify communication with fastboot getvar product
-
Point Xiaomi Mi Flash Tool to C:\umi_fw and confirm flash_all.bat (clean all) is marked
-
Execute flash to write dynamic super partitions to UFS 3.0 storage and allow 6 to 10 minutes for startup
Fastboot Batch Scripts & Flashing Modes
Fastboot firmware packages for the Xiaomi Mi 10 decompress into an images directory containing partition binaries alongside batch flashing scripts: flash_all.bat (clean flash), flash_all_except_storage.bat (preserve user data), and flash_all_lock.bat (clean flash and relock bootloader). For unbricking and clean installations, selecting flash_all.bat formats user data cleanly across UFS 3.0 partitions.
flash_all.bat
Official Fastboot packages for the Xiaomi Mi 10 contain automated batch scripts for distinct restoration requirements. Understanding their behavior helps you choose the correct option in Mi Flash Tool.
Never run flash_all_lock.bat when flashing cross-regional firmware (such as Global or EEA software on a Chinese M2001J2C handset), as relocking the bootloader against mismatched regional security signatures will result in an immediate hard brick.
Xiaomi Mi 10 Firmware Versions
Below are tested factory Fastboot and custom ROM packages for regional variants of the Xiaomi Mi 10. For historical MIUI releases, regional OTA files, and additional TWRP recovery binaries, browse the master archive.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V14.0.2.0.TJBEUXM (MIUI 14) |
EEA (Europe / UK) β M2001J2G | Android 13.0 | 5.4 GB | 0495336d4735fcd34d7f3793c380f1eb |
β¬οΈ Download |
OS1.0.3.0.TJBMIXM (HyperOS 1.0) |
Global (MI) β M2001J2G | Android 13.0 | 5.6 GB | f832efb181cb6a1e3654187dfab0b8a1 |
β¬οΈ Download |
OS1.0.3.0.TJBCNXM (HyperOS 1.0) |
China (CN) β M2001J2C | Android 13.0 | 5.7 GB | b616f9f481971a00d614ad14f39bc238 |
β¬οΈ Download |
OS1.0.7.0.TJBCNXM (Xiaomi.eu HyperOS 1.0) |
Europe / Multilingual (EU) | Android 13.0 | 4.04 GB | β | β¬οΈ Download |
Need additional packages like regional OTA files or older MIUI releases? Browse the full Xiaomi Mi 10 archive on AndroidFirmwareFile.com β
Snapdragon 865 Non-A/B Super Partition Architecture
The Qualcomm Snapdragon 865 platform utilizes Google dynamic partition architecture with a non-A/B (A-only) System-as-Root layout. Flashing official builds like umi_eea_global_images_V14.0.2.0.TJBEUXM_20230517.0000.00_13.0_eea_0495336d47.tgz writes the dynamic super.img partition directly. Maintain an uninterrupted USB connection throughout the entire flashing procedure.
Troubleshooting Xiaomi Mi 10 Flashing & Fastboot Errors
Mi Flash script parsing error: "update sparse crc list failed" or "CRC list error"
Certain official Xiaomi Fastboot packages contain CRC validation routines in flash_all.bat that cause older Mi Flash builds to abort. If encountered, open flash_all.bat in a text editor like Notepad, delete the lines containing "crc", save the file, and restart the flashing process.
Sparse partition write timeout: "error: cannot load 'super.img': data too large or timeout"
The 5GB+ dynamic super partition can time out when transferring over USB 3.0 ports or through unpowered USB hubs. Switch to a direct rear motherboard USB 2.0 port, use the original high-current USB-C cable, and ensure current Android SDK Platform Tools are installed.
Sensor initialization failure: "camera error: can't connect to camera" after flashing persist
Flashing or wiping the dedicated persist partition overwrites factory sensor calibration tables for the 108 MP Samsung HMX sensor, optical image stabilization (OIS), and laser autofocus. Never include persist in flashing scripts; if damaged, restore a verified persist backup created specifically for umi hardware.
Motherboard security fuse brick: "The system has been destroyed" after selecting flash_all_lock.bat
Occurs when flashing Global or European firmware onto an imported Chinese mainland unit (M2001J2C) while selecting flash_all_lock.bat. Xiaomi hardware fuses verify regional digital certificates on boot. Relocking mismatched firmware bricks the phone into EDL mode. Always select "clean all" (flash_all.bat).
Encountering issues during flashing? Review these verified workshop troubleshooting notes for the Xiaomi Mi 10. Troubleshooting & Common Errors β
Workshop Guidance & Custom Recovery Partition Mechanics
Because the Xiaomi Mi 10 implements Google's dynamic partition architecture on a non-A/B layout, it retains a dedicated physical recovery partition. Unlike newer Virtual A/B phones where the recovery ramdisk is merged into boot.img, you can permanently flash TWRP by executing "fastboot flash recovery twrp-3.7.1_12-0-umi.img", or test it temporarily without modifying onboard storage by issuing "fastboot boot twrp-3.7.1_12-0-umi.img".
Boot the Mi 10 into Fastboot mode and open Windows Device Manager. Under "Android Device", verify that "Android Bootloader Interface" appears without any yellow warning flags. Then open Command Prompt and execute "fastboot devices". If an alphanumeric serial number returns, the communication bridge is verified and safe for flashing.
First, confirm your bootloader is unlocked and boot into TWRP recovery. Because transitioning between official stock MIUI/HyperOS and Xiaomi.eu involves differing encryption keys, you must go to Wipe > Format Data and type "yes" to remove file-based encryption before installing the ROM zip archive.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.