Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi CC9e
The Xiaomi Mi CC9e (codename: laurus, model M1906F9SC) launched in July 2019, integrating Qualcomm's Qualcomm Snapdragon 665 (SM6125, 11nm LPP) processor with an under-display optical fingerprint scanner and a 48MP triple camera setup.
Whether your phone is caught in a boot loop, needs a clean restoration via laurus_images_V12.5.5.0.QFMCNXM_20211122.0000.00_10.0_cn_fc0291dab7.tgz, or you want to flash TWRP-3.3.2B-0620-XIAOMI_CC9E_10.0-CN-wzsx150-fastboot.zip, follow our verified instructions below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot .tgz Factory Restore)
Executes flash_all.bat across Fastboot to rewrite all system, vendor, boot, recovery, and modem partitions cleanly on unlocked M1906F9SC hardware.
TWRP Recovery (LR.Team wzsx150 Fastboot Installer)
Flashes custom TWRP recovery onto the physical recovery block and disables AVB 2.0 verification flags using fastboot.
Qualcomm EDL 9008 (Emergency Testpoint Unbrick)
Direct low-level hardware flashing path for deeply bricked devices that fail to turn on or cannot access the bootloader.
Essential Pre-Flash Preparations for Xiaomi Mi CC9e
Run fastboot getvar product in terminal to verify your device is laurus (M1906F9SC) and not the A/B slot Mi A3 model.
Execute fastboot getvar anti before flashing to ensure you are not attempting an unsupported firmware downgrade.
Ensure your Windows PC properly detects the Android Bootloader Interface without driver exclamation marks in Device Manager.
Keep the 4030 mAh battery adequately charged to prevent unexpected power failure during system partition flashing.
Flashing factory Fastboot images completely erases internal UFS storage, including photos, downloads, and app data.
Mi Flash Fastboot Walkthrough for Xiaomi Mi CC9e
5-step quick reference for the Xiaomi Mi CC9e. Need visuals or troubleshooting help? The full Mi Flash Tool guide covers everything in detail.
-
Verify hardware codename laurus (M1906F9SC) via fastboot getvar product and check anti-rollback index with fastboot getvar anti
-
Extract laurus_images_V12.5.5.0.QFMCNXM_20211122.0000.00_10.0_cn_fc0291dab7.tgz twice with 7-Zip into a clean directory such as C:\laurus_fw\
-
Put your phone into Fastboot mode by holding Volume Down and Power, then connect to a rear USB 2.0 port to prevent partition timeouts
-
Launch Mi Flash Tool, select C:\laurus_fw\, check the clean all option at the bottom, and avoid clean all and lock on modified systems
-
For custom recovery, flash TWRP and execute fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img before first boot
Fastboot Script Structure & Image Partitioning in Snapdragon 665
Fastboot firmware packages for the Xiaomi Mi CC9e (laurus) extract to reveal flash_all.bat alongside clean_all_and_lock.bat, flash_all_except_storage.bat, and the images folder containing raw partition images including system.img, vendor.img, boot.img, recovery.img, and modem.img.
flash_all.bat
Unpacking laurus_images_V12.5.5.0.QFMCNXM_20211122.0000.00_10.0_cn_fc0291dab7.tgz provides flash_all.bat, clean_all_and_lock.bat, and the images folder containing system.img, vendor.img, boot.img, recovery.img, and modem images. Always select the main folder containing the .bat files in Mi Flash Tool.
Always verify your device codename is laurus before executing flash_all.bat. Point Mi Flash Tool to the root extracted folder rather than the images directory, and ensure clean all is selected to preserve future bootloader flexibility.
Verified Stock Fastboot & Custom Recovery Images for Xiaomi Mi CC9e
Official factory Fastboot packages and custom recovery builds for Xiaomi Mi CC9e (laurus). For additional archive builds and recovery OTA packages, see AndroidFirmwareFile.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V12.5.5.0.QFMCNXM |
China (CN) β Final Official MIUI 12.5 Fastboot | Android 10.0 Q (Nov 2021) | 3.8 GB | fc0291dab7c363fa4e4e7b7286b67cda |
β¬οΈ Download |
xiaomi.eu V12.5.5.0.QFMCNXM |
Multilingual Xiaomi.eu Custom ROM (Recovery ZIP) | Android 10.0 Q | 2.1 GB | 84e27f18b5c9241b71ad0e8bbef80d8f |
β¬οΈ Download |
TWRP 3.3.2B-0620 |
LR.Team Custom Fastboot Recovery by wzsx150 | Android 9.0 - 10.0 | 32 MB | a95ef32bc972e2db4016e788bc53f7f1 |
β¬οΈ Download |
Need the official recovery OTA update package alongside Fastboot and TWRP? View the full laurus archive on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Flashing Modes & Restoration Methods for laurus
Restoring the Xiaomi Mi CC9e (laurus) to factory state requires matching the flashing utility to your intended software goal. For complete unbricking, clean updates, or boot loop recovery, laurus_images_V12.5.5.0.QFMCNXM_20211122.0000.00_10.0_cn_fc0291dab7.tgz provides the official China Stable MIUI 12.5 factory build.
If you prefer an international custom ROM with preinstalled Google Play Services, you can install the custom recovery archive TWRP-3.3.2B-0620-XIAOMI_CC9E_10.0-CN-wzsx150-fastboot.zip over Fastboot, disable AVB verification on vbmeta.img, format userdata, and install the multilingual xiaomi.eu_multi_MICC9e_V12.5.5.0.QFMCNXM_v12-10.zip package.
Troubleshooting Xiaomi Mi CC9e (laurus) Flashing Errors
FAILED (remote: 'Flashing is not allowed in Lock State')
Fastboot rejects partition writes because the bootloader is locked. Run the official Mi Unlock Tool to unlock the bootloader before attempting to flash factory images.
FAILED (remote: 'anti-rollback check failed')
The firmware build you are attempting to flash carries an anti-rollback index lower than the one currently recorded in your hardware fuses. Flash build V12.5.5.0.QFMCNXM or newer to proceed.
error: cannot load 'boot.img': No such file or directory
Mi Flash Tool failed to locate required partition images because the firmware path contains spaces, special symbols, or extra subfolders. Move your firmware to a root path such as C:\laurus_fw\ and verify the images folder is directly inside.
FAILED (remote: 'partition table doesn't exist')
Partition write failed because flashing scripts from sibling device Mi A3 (laurel_sprout) were executed on laurus. The Mi CC9e uses an A-only partition layout and does not contain dual A/B slot targets.
Encountering a specific error code or connection issue during flashing? Xiaomi Fastboot & Mi Flash Error Directory β
Workshop Flashing & Recovery Architecture Questions
Android Verified Boot (AVB) 2.0 is actively enforced on the Mi CC9e. When you replace the stock recovery partition with TWRP, the bootloader calculates a cryptographic mismatch against the system integrity descriptor stored in vbmeta.img. If you do not execute "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img", the bootloader rejects the modified recovery image and reboots into a continuous dm-verity bootloop.
Stock MIUI contains an automated script located at /system/bin/install-recovery.sh that automatically restores the official Mi recovery image on initial startup. To prevent this, immediately boot into TWRP after flashing by holding Volume Up and Power while disconnecting the USB cable, or use "fastboot boot recovery.img", then flash Magisk or allow TWRP to disable stock recovery replacement.
Official Android 10 MIUI 12.5 builds enforce Android File-Based Encryption (FBE) on the userdata partition. When booting into custom recovery for the first time, TWRP cannot automatically decrypt this encrypted file system, causing folders under /sdcard to show random alphanumeric names. To resolve this, tap Wipe > Format Data inside TWRP, type "yes" to confirm, and reboot back into Recovery before transferring any ROM files.
If a flashing failure corrupts primary bootloader partitions (aboot/sbl1) and the device will not power on or enter Fastboot mode, it must be restored via Qualcomm Emergency Download (EDL 9008) mode. On the Mi CC9e, access EDL mode by removing the rear glass cover, disconnecting the battery flex cable, and shorting the two gold motherboard test points with metal tweezers while inserting the USB cable connected to your computer.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.