Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi Note
The Xiaomi Mi Note (codename: virgo) launched in January 2015 on Qualcomm's Qualcomm Snapdragon 801 MSM8974AC (28nm) chip with dual-system KitKat storage that was later combined into a merged Android 6.0 layout.
Whether you are migrating cleanly onto MIUI 9 with virgo_global_images_V9.5.1.0.MXEMIFA_20180406.0000.00_6.0_global_4d653339a5.tgz or setting up TWRP 3.3.0.0 on merged partitions, follow the steps below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot — Merged Partition Flash)
Writes full MIUI 9 Marshmallow partitions via flash_all.bat and handles the KitKat-to-Marshmallow partition merge automatically.
Qualcomm EDL 9008 (Emergency Unbrick)
Recovers Mi Note units bricked by mismatched KitKat vs Marshmallow partition scripts without requiring server authorization.
TWRP 3.3.0.0 Custom Recovery (GuaiYiHu)
Installs Xiaomi.eu V8.5.1.0.MXECNED and manages merged-storage ROM backups on Android 6.0.
Pre-Flash Setup for Mi Note (virgo) Merged Partitions
Avoid mid-flash dropouts during partition table re-mapping over microUSB.
Older 2015 microUSB sockets loosen easily; use a snug data cable in a rear motherboard USB 2.0 port.
China Telecom CDMA units require virgo_lte_ct KitKat images; standard units use virgo.
Merging KitKat dual-system partitions to Marshmallow with flash_all.bat wipes internal eMMC storage completely.
Mi Flash Walkthrough (MIUI 9 & Partition Merge)
A condensed step-by-step summary specific to the Xiaomi Mi Note. Follow the full Mi Flash Tool guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Install Legacy-Friendly Mi Flash Tool and Qualcomm / Android Bootloader Drivers
-
Extract virgo_global_images_V9.5.1.0.MXEMIFA_20180406.0000.00_6.0_global_4d653339a5.tgz Twice to C:\virgo\
-
Hold Volume Down + Power to Boot Fastboot (Check Variant virgo vs virgo_lte_ct)
-
Choose "clean all" in Mi Flash (Mandatory When Merging KitKat 4.4 to Marshmallow 6.0)
-
Click Flash Over a Direct Rear microUSB 2.0 Connection and Wait Up to 10 Minutes
Finding flash_all.bat Inside MSM8974AC Packages
Qualcomm Snapdragon 801 Fastboot packages for Xiaomi Mi Note (virgo) use rawprogram0.xml, patch0.xml, and an MSM8974AC Firehose/programmer inside images alongside flash_all.bat:
flash_all.bat
Extracting virgo_global_images_V9.5.1.0.MXEMIFA_20180406.0000.00_6.0_global_4d653339a5.tgz twice with 7-Zip places flash_all.bat beside the images directory holding rawprogram0.xml and the MSM8974AC programmer.
Codename virgo covers ONLY the 2015 Snapdragon 801 Xiaomi Mi Note. Never flash Mi Note Pro (leo) packages onto virgo, and keep China Telecom virgo_lte_ct KitKat images separate from standard GSM/LTE models.
When migrating from older Android 4.4.4 KitKat builds to Android 6.0 Marshmallow, always pick clean all (flash_all.bat) to merge internal partitions cleanly.
Xiaomi Mi Note Firmware Versions
Tested Fastboot builds for standard Global Xiaomi Mi Note (virgo) and China Telecom (virgo_lte_ct) alongside GuaiYiHu TWRP 3.3.0.0. Browse all 9 builds—including China MIUI 9, OTA ZIPs, Xiaomi.eu MIUI 8, and TWRP 3.1.1.0—below.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V9.5.1.0.MXEMIFA (Global Fastboot) |
Global Stable (MI) | Android 6.0 (Marshmallow) | 1.15 GB | 4d653339a5c5e534e838a1b69654de15 |
⬇️ Download |
V7.1.4.0.KXJCNCK (virgo_lte_ct Fastboot) |
China Telecom (CT) | Android 4.4.4 (KitKat) | 985.6 MB | 983fea8031e2ab761c27b640dbc41fe8 |
⬇️ Download |
TWRP 3.3.0.0 (GuaiYiHu) |
Merged 6.0 Recovery IMG | Android 6.0+ | 15.2 MB | 07629285974eb605aa97b22a571512b8 |
⬇️ Download |
Browse all 9 Xiaomi Mi Note (virgo & virgo_lte_ct) files on AndroidFirmwareFile.com → View full Xiaomi Mi Note archive on AndroidFirmwareFile.com →
KitKat-to-Marshmallow Merge, virgo_lte_ct & TWRP Notes
Why Clean Fastboot Matters Across the KitKat-to-Marshmallow Boundary: Before Android 6.0, virgo split eMMC 5.0 storage into two separate system volumes. Flashing a Marshmallow updater ZIP directly on top of unmerged KitKat fails until you run a complete Fastboot install of virgo_global_images_V9.5.1.0.MXEMIFA_20180406.0000.00_6.0_global_4d653339a5.tgz.
Once on the merged table, flashing TWRP-20190418-3.3.0.0-virgo.img opens the door for xiaomi.eu_multi_MINote_V8.5.1.0.MXECNED_v8-6.0.zip or custom AOSP ROMs while keeping the ESS ES9018K2M Hi-Fi DAC hardware operational.
Fixing Mi Note (virgo) Partition Mismatch, TWRP Mount & IMEI Errors
Updater Error: "Partition Size Mismatch" Going From KitKat 4.4 to Marshmallow 6.0
Community threads note that flashing a Marshmallow Recovery ZIP (or partial update) over Xiaomi's older KitKat dual-system layout fails because system1 alone cannot fit Android 6.0. Flash virgo_global_images_V9.5.1.0.MXEMIFA_20180406.0000.00_6.0_global_4d653339a5.tgz cleanly using "clean all" in Mi Flash first to merge storage.
TWRP Mount Alert: "Failed to mount '/system' (Invalid argument)" on Merged Storage
Installing an outdated KitKat-era TWRP build onto a phone already converted to Android 6.0 merged storage prevents /system and /data from mounting. Update via Fastboot to TWRP-20190418-3.3.0.0-virgo.img.
Baseband Lost ("Unknown IMEI") After Cross-Flashing virgo_lte_ct Software
China Telecom virgo_lte_ct firmware carries CDMA/EVDO radio files (V7.1.4.0.KXJCNCK) tailored for different RF calibration tables than standard virgo units. Restore your unit's matching Fastboot NON-HLOS.bin modem image immediately.
Device Manager Stuck on "QHSUSB_BULK" Over Legacy microUSB Port
Loose microUSB sockets or missing unsigned drivers prevent Qualcomm 9008 detection on Windows 10/11. Try a short data-grade microUSB cable in a rear motherboard USB 2.0 socket and reinstall Qualcomm QDLoader drivers.
Need help fixing another legacy Snapdragon Fastboot or mount code? Mi Flash & Merged Storage Error Directory →
Dual-System Merge, Qualcomm 9008 & EFS Calibration FAQ
On initial 2015 Android 4.4.4 KitKat builds, the Mi Note maintained two separate 600 MB-class system halves (<code>system1</code> and <code>system2</code>) for A/B-style updates. To give Android 6.0 Marshmallow and MIUI 9 enough space, flashing <code>virgo_global_images_V9.5.1.0.MXEMIFA_20180406.0000.00_6.0_global_4d653339a5.tgz</code> combines both regions into a single unified <code>/system</code> volume.
Yes. Released in early 2015 before Xiaomi introduced server-side EDL checks or strict unlock timers, <code>virgo</code> supports unauthenticated Qualcomm 9008 unbricking over <code>fastboot oem edl</code> or rear motherboard test pads using standard Mi Flash tools.
When flashing <code>TWRP-20190418-3.3.0.0-virgo.img</code> with <code>fastboot flash recovery</code>, hold <strong>Volume Up + Power</strong> immediately instead of letting MIUI boot normally—otherwise stock MIUI's init script restores factory recovery on first boot before TWRP can patch it.
Yes — while <code>flash_all.bat</code> reformats userdata, cache, and system to merge storage cleanly, it leaves <code>modemst1</code>, <code>modemst2</code>, and <code>fsg</code> EFS calibration partitions untouched. Even so, creating a quick EFS backup in GuaiYiHu TWRP before experimenting with custom ROMs is good practice.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.