Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi POCO M5 / Redmi 11 Prime (rock)
This workshop guide provides step-by-step bench instructions to flash official stock Fastboot firmware to the Xiaomi POCO M5 / Redmi 11 Prime (rock) (September 2022) using Mi Flash Tool. Writing multi-gigabyte system and dynamic super partitions to MediaTek's MediaTek Helio G99 (MT6789) platform over UFS 2.2 storage requires stable USB driver handshakes and correct batch script selection.
Whether your phone is trapped in a startup bootloop, recovering from corrupted partitions, or returning to clean official HyperOS 1.0 (Android 14.0), follow the verified prerequisites, battery precautions, and step-by-step flashing procedures detailed below.
Which Flash Mode Should You Use?
Xiaomi Mi Flash Fastboot Flashing (Recommended)
Standard official method for restoring stock HyperOS firmware using an unlocked bootloader and Mi Flash Tool in Fastboot mode.
MediaTek SP Flash Tool / BROM Mode
Low-level flashing mode used for direct scatter flashing when standard Fastboot mode is inaccessible.
Recovery Sideload & Local Update
Official recovery interface used for installing signed recovery update packages directly over USB or on-device storage.
What You Need Before Flashing
Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility.
A 64-bit Windows PC with MediaTek USB VCOM drivers and updated Android SDK Platform Tools installed.
Ensure the battery has at least 50% charge to prevent shutdown during 6GB+ sparse partition writes.
Use a certified USB Type-C data sync cable plugged directly into a rear motherboard USB port.
Flashing stock Fastboot firmware with "clean all" completely wipes internal storage and applications.
Decompress the .tgz archive twice using 7-Zip until flash_all.bat is exposed in a clean root directory.
How to Flash the Xiaomi POCO M5 / Redmi 11 Prime (rock) β Quick Overview
A fast reference for flashing the Xiaomi POCO M5 / Redmi 11 Prime (rock) (Helio G99) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Unlock bootloader with Mi Unlock
-
Decompress Fastboot TGZ archive twice
-
Enter Fastboot mode
-
Configure Mi Flash Tool with "clean all"
-
Flash firmware and await first boot
Firmware Package for Helio G99 (flash_all.bat)
Official Fastboot firmware packages for the Xiaomi POCO M5 are distributed as multi-gigabyte .tgz archives containing raw partition binaries (boot.img, init_boot.img, vendor_boot.img, dtbo.img, vbmeta.img, and sparse super.img dynamic partitions) written via flash_all.bat across the MediaTek Helio G99 UFS 2.2 storage controller.
flash_all.bat
Official Xiaomi POCO M5 firmware is distributed as multi-gigabyte .tgz archives. Extract the archive twice using 7-Zip until the folder containing "flash_all.bat" and the raw partition images is visible.
Fastboot Flashing Rule: Always select "clean all" (flash_all.bat) when using Mi Flash Tool on imported hardware to avoid triggering the "The system has been destroyed" lock brick.
Xiaomi POCO M5 / Redmi 11 Prime (rock) Firmware Versions
Official stock firmware downloads for the Xiaomi POCO M5 / Redmi 11 Prime (rock). Verify your hardware model variant before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS1.0.5.0.ULUEUXM (HyperOS 1.0) |
EEA (Europe / UK) | Android 14.0 | 6.0 GB | bc4bab7912ab7cf895a1c9d9f0d71fb5 |
β¬οΈ Download |
This phone has 15 additional regional, recovery, and custom recovery builds. Browse the complete archive on AndroidFirmwareFile.com β
Xiaomi POCO M5 / Redmi 11 Prime (rock) β Important Notes
The Xiaomi POCO M5 houses a 5,000 mAh internal lithium-polymer battery. Writing full HyperOS 1.0 dynamic super partition images takes approximately 3 to 5 minutes over UFS 2.2. Confirm that your battery has at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during partition writes.
Troubleshooting Xiaomi POCO M5 Flashing & HyperOS Errors
Fastbootd Port Re-enumeration Timeout: "FAILED (remote: 'fastbootd transport stalled') during super.img chunk flashing"
When flashing dynamic super partitions on the MediaTek Helio G99 platform, the phone automatically transitions from bootloader Fastboot into userspace fastbootd. If USB 3.2 ports with aggressive power-saving governors take longer than 10 seconds to re-enumerate the fastbootd interface, the flash script aborts. Workshop technicians suggest connecting directly to a rear motherboard USB port, running Mi Flash Tool as Administrator, and temporarily disabling Windows USB selective suspend.
MediaTek Preloader Disconnect Loop: "STATUS_ERR / BROM connection dropped during MT6789 handshake"
Attempting low-level SP Flash Tool recovery without an active auth bypass causes the MT6789 bootrom to terminate the USB connection after 2 seconds. Because Xiaomi enforces secure boot challenge-response verification on Helio G99 hardware, flashing scatter files requires passing an authorized service account challenge or using Fastboot mode with an officially unlocked bootloader.
Bootloader Relock Security Trap: "The system has been destroyed / dm-verity failed after flash_all_lock.bat"
Selecting "clean all and lock" (flash_all_lock.bat) when flashing European (ULUEUXM) or Global firmware onto a non-matching regional hardware unit triggers an immediate bootloader lockout. The MediaTek secure bootloader checks the signed vbmeta hash against regional hardware efuses; if mismatched, it refuses to boot. Technicians advise always selecting "clean all" (flash_all.bat) without relocking.
For solving common Mi Flash Tool timeout codes, fastbootd transition delays, and HyperOS recovery issues: Xiaomi Flashing Error Directory β
Frequently Asked Questions β Xiaomi POCO M5 / Redmi 11 Prime (rock)
The capacitive side-mounted fingerprint sensor stores hardware calibration data and unique biometric hash keys inside the dedicated persist partition (persist.img). Official Fastboot flashing with flash_all.bat intentionally bypasses writing or formatting the persist partition, protecting factory sensor calibration. If biometric recognition behaves erratically after flashing, wiping cache partitions and re-registering fingerprints in device settings resolves software handshake latency.
On Windows 10 and 11, MediaTek Helio G99 preloader ports enumerate for only 2 to 3 seconds before the phone boots into charging mode if an active handshake is not established. Workshop technicians recommend installing official MediaTek USB VCOM drivers with driver signature enforcement disabled, opening Device Manager to confirm the "MediaTek PreLoader USB VCOM Port" appears without warning icons, and using a high-quality USB 2.0 port to prevent dropouts.
On Android 14 HyperOS 1.0, the dynamic super partition exceeds 5.5GB and is written via userspace fastbootd. During execution of flash_all.bat, the phone automatically restarts from bootloader Fastboot into fastbootd (displaying an English Fastbootd menu on screen). Do not disconnect the cable during this 8 to 10-second transition; Mi Flash Tool will re-enumerate the device and resume streaming the sparse chunks into UFS 2.2 storage.
For hard-bricked units unable to reach Fastboot mode, emergency MediaTek BootROM (BROM) mode is accessed via motherboard hardware test points. Access requires un-clipping the textured plastic rear unibody cover using plastic guitar picks. Technicians advise extreme caution when lifting the rear cover, as the side power button incorporates the fragile fingerprint sensor flex cable which tears easily if pulled abruptly. Bridging the two gold test pads near the Helio G99 shield while inserting the USB cable forces BROM mode.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.