Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi 13 / POCO M6
The Xiaomi Redmi 13 / POCO M6 was released in June 2024, built on the MediaTek Helio G91-Ultra MT6768 / MT6769V (12nm FinFET, 64-bit Octa-Core: 2x 2.0 GHz Cortex-A75 + 6x 1.8 GHz Cortex-A55) platform. Featuring a 6.79-inch 90Hz Full HD+ display, a 108 MP main camera, and a 5030 mAh battery with 33W charging, it provides reliable performance across international markets.
Flashing official factory Fastboot firmware using Xiaomi Mi Flash Tool repairs corrupted partitions, recovers bootlooping devices, and restores official HyperOS software stability. Follow the verified driver preparation and bench steps below to flash your device safely.
Which Flash Mode Should You Use?
Fastboot Mode (Bootloader Flashing)
Official flashing interface for unlocked devices. Writes partition blocks via Mi Flash Tool or flash_all.bat scripts.
Stock Android Recovery Mode
Stock recovery interface for executing factory data wipes or clearing cache partitions.
What You Need Before Flashing
A PC running 64-bit Windows with Mi Flash Tool and official Xiaomi/MediaTek Fastboot drivers installed.
Download and unpack the official moon Fastboot archive twice with 7-Zip until flash_all.bat is visible.
Ensure the 5030mAh battery has at least 50% charge to ensure stable power delivery throughout the flashing process.
Use a quality USB Type-C data cable connected directly to a rear USB 2.0 port on the computer motherboard.
In Mi Flash Tool, select "clean all" at the bottom right. Never select "clean all and lock" on cross-region software.
How to Flash the Xiaomi Redmi 13 / POCO M6 β Quick Overview
A condensed step-by-step summary specific to the Xiaomi Redmi 13 / POCO M6. Follow the full Mi Flash Tool guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Unlock bootloader & extract Fastboot TGZ package
-
Install Xiaomi Fastboot & MediaTek USB Drivers
-
Boot phone into Fastboot Mode
-
Select firmware folder & choose "clean all"
-
Flash partitions and await automatic reboot
Fastboot Flash Script & Firmware Package for Helio G91-Ultra
Official Fastboot firmware packages for the Xiaomi Redmi 13 and POCO M6 (moon) contain raw partition images (boot.img, super.img, recovery.img, vbmeta.img, and preloader) orchestrated by flash_all.bat, flash_all_except_storage.bat, and flash_all_lock.bat. When executed through Mi Flash Tool, these scripts write partition images directly to the MediaTek Helio G91-Ultra eMMC 5.1 storage controller.
flash_all.bat
Official factory Fastboot firmware for the Xiaomi Redmi 13 and POCO M6 utilizes flash_all.bat and the /images/ partition directory. In Mi Flash Tool, select the root extracted folder containing these scripts.
The Redmi 13 and POCO M6 (board codename moon) feature the MediaTek Helio G91-Ultra (MT6768/MT6769V) processor with 6GB/8GB LPDDR4X RAM, eMMC 5.1 storage, and a 5030mAh battery.
Always confirm your device codename is "moon" using "fastboot getvar product" before flashing. Do not attempt to flash firmware intended for other Redmi numbered series models, as differing partition layouts will cause flashing failures.
Xiaomi Redmi 13 / POCO M6 Firmware Versions
Tested stock firmware packages for confirmed hardware variants of the Xiaomi Redmi 13 / POCO M6. Always confirm your model codename is "moon" before flashing.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS3.0.304.0.WNTEUXM (20261010.0000.00) |
EEA Europe (EU) β Multilingual with GMS | Android 16.0 (Xiaomi HyperOS 3.0) | 7.1 GB | 1fcd82f6c908bd1e284d271ad4010370 |
β¬οΈ Download |
OS3.0.304.0.WNTMIXM (20260920.0000.00) |
Global Stable (MI) β Multilingual with GMS | Android 16.0 (Xiaomi HyperOS 3.0) | 7.9 GB | 50b730e0ef8707f64d8620afab2d15ba |
β¬οΈ Download |
This device family includes 12 official Fastboot and Recovery packages across Global, EEA, Indonesia, Russia, Turkey, and Taiwan regional releases. Browse the complete 12-package archive on AndroidFirmwareFile.com β
Xiaomi Redmi 13 / POCO M6 β Important Notes
Flashing official Fastboot TGZ firmware via Mi Flash Tool restores corrupted system partitions, fixes software bootloops, and returns your device to official factory HyperOS stability.
Because the MediaTek Helio G91-Ultra platform enforces Xiaomi service authorization on low-level BootROM (EDL/BROM) mode, open SP Flash Tool flashing is not supported without service credentials. Maintaining an unlocked bootloader and using Fastboot mode is your primary workshop repair method.
Troubleshooting Xiaomi Redmi 13 & POCO M6 HyperOS Flashing Issues
Cross-Region Lockout: "This MIUI/HyperOS version cannot be installed on this device"
Community repair discussions indicate this error triggers when flashing across regional branches (such as converting a Latin American hardware unit 24049RN28L to European software) while selecting "clean all and lock". The bootloader verifies the internal hardware region tag against the flashed firmware package. When they do not match, the bootloader locks and sends the phone into a recovery bootloop. Technicians suggest always using "clean all" (flash_all.bat) to leave the bootloader open.
BootROM Authentication: MediaTek SLA/DA Authorization Rejection in SP Flash Tool
Observed when attempting to flash this MediaTek Helio G91-Ultra handset using standard SP Flash Tool in BROM mode. Xiaomi enforces hardware-level Serial Link Authentication (SLA) and Download Agent Authorization (DAA) in the MT6768/MT6769 BootROM. Open flashing tools fail with handshake timeouts without Xiaomi authorized service center credentials. Technicians recommend relying strictly on Fastboot mode via Mi Flash Tool for firmware repairs.
Fastboot Timeout: Device Reboots During Driver Handshake
MediaTek-based Xiaomi devices have a Fastboot timeout of approximately 3 to 5 minutes to protect the screen and battery. If the handshake takes too long or Windows installs drivers slowly, the device reboots. Technicians recommend keeping the device disconnected until the ROM is fully unpacked and loaded in Mi Flash, then putting the phone into Fastboot and connecting directly.
For in-depth Xiaomi Fastboot error codes, driver troubleshooting, and bootloader recovery: Mi Flash Tool Error Directory β
Frequently Asked Questions β Xiaomi Redmi 13 / POCO M6
This occurs if you attempt to flash firmware intended for a different platform (such as Redmi 13C "gale" or Redmi 12 "fire"), or if Fastboot fails to read the hardware codename variable. Technicians suggest running "fastboot getvar product" in a command prompt window to confirm the board returns "moon" before launching the flash process.
Xiaomi Fastboot packages are distributed as double-compressed .tgz files. Standard archive tools often extract only the outer layer into a .tar file. You must extract the .tar file a second time to reveal the raw batch scripts and the /images/ directory. Also verify the target folder path contains no spaces (e.g., C:\moon_fw\).
MediaTek-based Xiaomi devices have a built-in Fastboot timeout of approximately 3 to 5 minutes to prevent screen burn-in and battery drain. If the handshake takes too long or Windows installs drivers slowly, the device reboots into the system. Technicians recommend keeping the device disconnected until the ROM is fully unpacked and selected in Mi Flash, then entering Fastboot and connecting immediately.
HyperOS releases on the MT6768/MT6769 platform enforce hardware-level Serial Link Authentication (SLA) and Download Agent Authorization (DAA) in the BootROM. If the preloader partition is damaged and the device enumerates only as MediaTek USB Port (COM), restoring it requires an authorized service account or authorized service center tool.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.