Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi K60E
The Xiaomi Redmi K60E (codename: rembrandt) launched in December 2022 as a China-exclusive performance handset powered by MediaTek's MediaTek Dimensity 8200 (4nm TSMC, MT6896) processor with UFS 3.1 storage and a 1440p OLED display.
Whether you need to resolve a bootloop after an update, unbrick a soft-bricked phone, or restore factory HyperOS 2.0 using rembrandt_images_OS2.0.25.0.UMMCNXM_20260423.0000.00_14.0_cn_34922e09e5.tgz, follow the steps below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot / fastbootd ROM)
Official full-restore method for rembrandt. Runs flash_all.bat to rewrite boot, init_boot, vendor_boot, super, and userdata over fastbootd. Requires an unlocked bootloader and erases all user data.
Fastboot CLI (Command Line / Manual Slot Check)
Runs manual fastboot getvar checks, slot switches, or flashes standalone boot / vendor_boot partitions from your PC terminal.
MediaTek BROM / SP Flash Tool (Emergency)
Low-level MT6896 preloader/BROM mode for units that cannot enter Fastboot. Note that Dimensity 8200 HyperOS hardware enforces signed SLA/DA authentication.
Essential Setup Before Flashing 6.80GB HyperOS 2.0 Files
Fastboot .tgz flashing requires Xiaomi account unlock permission on China-region hardware before flash_all.bat can run.
Install Xiaomi/MTK drivers and Google Platform-Tools v35+ so 6.80 GB HyperOS 2.0 super.img sparse transfers never stall.
Plug a solid Type-C data cable straight into a rear motherboard USB 2.0 port to avoid USB 3.x xHCI drops during fastbootd reboots.
Keep the 5,500 mAh battery well charged before starting so power stays steady during dynamic super partition writes.
Redmi K60E has no microSD slot and flash_all.bat wipes internal UFS 3.1 storage clean. Save personal files off the phone first.
Mi Flash & Fastbootd Walkthrough for Redmi K60E (rembrandt)
A condensed step-by-step summary specific to the Xiaomi Redmi K60E. Follow the full Mi Flash Tool guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Confirm unlocked bootloader status via Mi Unlock before starting Fastboot writes
-
Extract rembrandt_images_OS2.0.25.0.UMMCNXM_20260423.0000.00_14.0_cn_34922e09e5.tgz twice to C:\rembrandt_fw\
-
Install Google Platform-Tools v35+ and Xiaomi/MediaTek drivers on 64-bit Windows
-
Boot into Fastboot (Volume Down + Power) and attach straight to a rear USB 2.0 port
-
Select C:\rembrandt_fw\ in Mi Flash Tool, confirm "clean all", and flash
Finding flash_all.bat Inside Dimensity 8200 Packages
Official Xiaomi Redmi K60E Fastboot archives arrive as double-compressed .tgz files. Unpacking twice with 7-Zip places flash_all.bat at the outer level alongside the images directory holding preloader, boot, init_boot, vendor_boot, and super.img:
flash_all.bat
After unpacking rembrandt_images_OS2.0.25.0.UMMCNXM_20260423.0000.00_14.0_cn_34922e09e5.tgz twice with 7-Zip, flash_all.bat sits at the top folder beside the images directory containing preloader, boot, init_boot, and super.img. Point Mi Flash Tool to that outer directory.
Codename rembrandt (model 22122RK93C) identifies ONLY the MediaTek Dimensity 8200 Redmi K60E. Never load images meant for Snapdragon Redmi K60 / POCO F5 Pro (mondrian), K60 Pro (socrates), or K60 Ultra (corot).
Point Mi Flash Tool at the outer root directory containing flash_all.bat (for example C:\rembrandt_fw\), never inside the images folder.
Always choose "clean all" (flash_all.bat) and avoid "clean all and lock" unless returning pure unmodified China stock on factory hardware.
Xiaomi Redmi K60E Firmware Versions
Verified China Stable HyperOS 2.0 Fastboot build tested for the Xiaomi Redmi K60E (rembrandt). Check the complete archive entry below for full board taxonomy and release details.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
OS2.0.25.0.UMMCNXM |
China (CN) β HyperOS 2.0 | Android 14.0, Apr 2026 | 6.80 GB | 34922e09e53a94c676e70f627b6b25f8 |
β¬οΈ Download |
View the full Redmi K60E (rembrandt) technical profile and archive on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Fastbootd, CLI Slot Controls & MT6896 BROM Notes
The Xiaomi Redmi K60E (codename rembrandt, model 22122RK93C) is built around MediaTek's 4nm Dimensity 8200 (MT6896) processor, 1440p 120Hz OLED, UFS 3.1 storage, and a 5,500 mAh battery with 67W wired charging.
On unlocked phones, Mi Flash Tool executes flash_all.bat from rembrandt_images_OS2.0.25.0.UMMCNXM_20260423.0000.00_14.0_cn_34922e09e5.tgz, transitioning automatically from bootloader Fastboot into userspace fastbootd to write the multi-gigabyte dynamic super.img partition cleanly.
Fixing Redmi K60E Sparse Write, Path & Encryption Errors
Fastbootd Log: "FAILED (remote: data too large)" or Write Timeout on super.img
HyperOS 2.0 super.img images are multi-gigabyte sparse payloads written inside userspace fastbootd. Outdated fastboot binaries or USB 3.x power-saving controllers stall during the fastboot -> fastbootd port handoff. Update to Platform-Tools v35+ and use a rear motherboard USB 2.0 port.
Mi Flash Dialog: "flash_all.bat not found" or Path Too Deep
This happens if you point Mi Flash Tool at an unextracted .tar intermediate archive, a path containing spaces, or inside the inner images subfolder. Extract twice with 7-Zip directly into C:\rembrandt_fw\ and select that top folder.
Prompt: "Data is corrupted" After Reboot
Leftover Android 14 File-Based Encryption (FBE) metadata on userdata triggers validation failures when moving between MIUI/HyperOS builds. Use Volume Down in stock Mi Recovery to select "Wipe Data" -> "Wipe All Data" and confirm with Power before rebooting.
Boot Freeze: "This MIUI version can't be installed on this device"
Caused by picking "clean all and lock" (flash_all_lock.bat) on hardware with mismatched security metadata or tampered partitions. Always verify "clean all" is selected before clicking Flash.
Need troubleshooting for another fastbootd or MediaTek error code? Fastboot & Mi Flash Error Directory β
China Unlock Rules, BROM Timing & Virtual A/B Q&A
Because the Redmi K60E (22122RK93C) is a China-exclusive device, HyperOS 2.0 enforces China-region Xiaomi account verification (and waiting periods) via Mi Unlock before Fastboot commands can alter partitions. Once unlocked, never select "clean all and lock" unless restoring completely unmodified stock China software matching factory states.
On the MT6896 platform, the low-level USB VCOM preloader only listens for roughly two to four seconds at startup before moving into normal boot, and HyperOS enforces strict SLA/DA signature checks over BROM. Standard owners with unlocked bootloaders should rely on Fastboot / userspace fastbootd rather than forcing BROM.
Yes. Official flash_all.bat scripts leave nvram, nvdata, and /persist untouched when restoring UFS 3.1 firmware, keeping dual-SIM IMEI numbers, Wi-Fi MAC addresses, and optical/gyro calibration intact across clean HyperOS 2.0 restores.
HyperOS 2.0 on rembrandt uses Virtual A/B slots and reboots into userspace fastbootd mid-script to flash dynamic partitions. If a cable slips mid-write, hold Volume Down + Power back into bootloader Fastboot, run "fastboot getvar current-slot", switch to the working slot with "fastboot set_active a" (or "b") if needed, and restart flash_all.bat.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.