Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi Note 10S
This workshop guide provides step-by-step instructions to flash official stock Fastboot firmware to the Xiaomi Redmi Note 10S (April 2021) using Mi Flash Tool. Writing multi-gigabyte system and dynamic super partitions to MediaTek's MediaTek Helio G95 (MT6785V/CD) platform over UFS 2.2 storage requires stable USB driver handshakes and correct batch script selection.
Whether your phone is trapped in a startup bootloop, recovering from corrupted partitions, or returning to clean official MIUI 14.0 (Android 13.0), follow the verified prerequisites, battery precautions, and step-by-step flashing procedures detailed below.
Which Flash Mode Should You Use?
Xiaomi Mi Flash Fastboot Flashing (Recommended)
Standard official method for restoring stock MIUI firmware using an unlocked bootloader and Mi Flash Tool in Fastboot mode.
MediaTek SP Flash Tool / BROM Mode
Low-level flashing mode used for direct scatter flashing when standard Fastboot mode is inaccessible.
Custom Recovery Flash & Installation
Method for flashing community custom recoveries (unofficial TWRP or OrangeFox) directly to the boot partition.
Recovery Sideload & Local Update
Official recovery interface used for installing signed recovery update packages directly over USB or on-device storage.
Essential Checks Before Flashing Redmi Note 10S
Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility.
A 64-bit Windows PC with MediaTek USB VCOM drivers and updated Android SDK Platform Tools installed.
Ensure the internal 5,000 mAh battery holds at least 50% charge to prevent shutdown during 6GB+ sparse partition writes.
Use a certified USB Type-C data cable plugged directly into a native motherboard rear USB port.
Flashing stock Fastboot firmware with "clean all" completely wipes internal storage and applications.
Decompress the .tgz archive twice using 7-Zip until flash_all.bat is exposed in a clean root directory.
Mi Flash & Fastboot Walkthrough for rosemary
A quick 5-step overview built specifically for the Xiaomi Redmi Note 10S. The full Mi Flash Tool guide adds screenshots, progress tracking, and fixes for common errors.
-
Verify rosemary product string with fastboot getvar product and unlock bootloader via Mi Unlock
-
Extract rosemary_eea_global_images_V14.0.11.0.TKLEUXM_20240718.0000.00_13.0_eea_537e4b889a.tgz twice using 7-Zip
-
Boot into Fastboot mode by holding Volume Down and Power until the orange FASTBOOT graphic shows
-
Select extracted directory in Mi Flash Tool and verify clean all is highlighted
-
Execute flash and maintain cable connection as fastbootd writes super.img dynamic partitions
Firmware Package for Helio G95 (flash_all.bat)
Official Fastboot firmware packages for the Xiaomi Redmi Note 10S are distributed as multi-gigabyte .tgz archives containing raw partition binaries (boot.img, dtbo.img, vbmeta.img, and sparse super.img dynamic partitions) flashed via flash_all.bat across the MediaTek Helio G95 UFS 2.2 storage controller.
flash_all.bat
Official Xiaomi Redmi Note 10S firmware is distributed as multi-gigabyte .tgz archives. Extract the archive twice using 7-Zip until the folder containing "flash_all.bat" and the raw partition images is visible.
Fastboot Flashing Rule: Always select "clean all" (flash_all.bat) when using Mi Flash Tool on imported hardware to avoid triggering the "The system has been destroyed" lock brick.
Xiaomi Redmi Note 10S Firmware Versions
Official stock firmware downloads for the Xiaomi Redmi Note 10S. Verify your hardware model variant before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V14.0.11.0.TKLEUXM (MIUI 14.0) |
EEA (Europe / UK) | Android 13.0 | 6.5 GB | 537e4b889ac1a9adf54ac665d2975ddb |
β¬οΈ Download |
This device has 13 additional regional, recovery, and Indian channel builds in the full archive. Browse the complete archive on AndroidFirmwareFile.com β
Helio G95 Platform & Partition Architecture
The Xiaomi Redmi Note 10S houses a 5,000 mAh internal battery. Writing full MIUI 14.0 dynamic super partition images takes approximately 3 to 5 minutes over UFS 2.2 storage using the official European package rosemary_eea_global_images_V14.0.11.0.TKLEUXM_20240718.0000.00_13.0_eea_537e4b889a.tgz. Confirm that your battery has at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during partition writes.
Troubleshooting Redmi Note 10S Flashing & Partition Errors
Target Partition Error: "FAILED (remote: 'Partition recovery not support flash')"
The MediaTek Helio G95 platform uses an A-only partition layout with no physical recovery partition; the stock recovery ramdisk is housed directly inside boot.img. Running "fastboot flash recovery recovery.img" will always fail. Custom recovery images (such as unofficial TWRP or OrangeFox) must be flashed directly to the boot partition using "fastboot flash boot recovery_name.img".
Bootloader Lock Rejection: "FAILED (remote: 'command not allowed in locked state')"
Fastboot partition writes are rejected by the primary bootloader because the device remains locked. You must link your Mi Account in Developer Options under Mi Unlock Status, wait out the mandatory countdown period (usually 168 hours), and execute the unlock via the official Xiaomi Mi Unlock tool on Windows.
BROM Handshake Failure: "STATUS_BROM_CMD_FAIL (0xC0060005) / LIB DA not match in SP Flash Tool"
MediaTek BootROM hardware security halts low-level scatter flashing over USB VCOM because Xiaomi enforces secure boot challenge-response verification on the MT6785 silicon. Flashing scatter packages through SP Flash Tool requires using an authorized service center credential or running an MTK Auth Bypass utility before initiating the download.
AVB 2.0 Verification Trap: "dm-verity corruption halt on modified boot image"
Flashing a custom recovery or modified kernel to the boot partition alters cryptographic signatures and triggers Android Verified Boot 2.0 boot-loop traps. To prevent DM-Verity verification halts, flash matching stock vbmeta.img with verity disabled using "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img".
For solving common Mi Flash Tool timeout codes, fastbootd transition delays, and MIUI 14 recovery issues: Xiaomi Flashing Error Directory β
Redmi Note 10S Flashing & Recovery FAQ
Fastboot flashing via Mi Flash Tool is the primary and safest method for restoring stock MIUI firmware, resolving system bootloops, and performing clean updates. It operates within the device's authorized bootloader environment without triggering MediaTek BootROM hardware authentication locks. SP Flash Tool is strictly reserved as an emergency recovery method when the bootloader is broken or inaccessible, as low-level scatter flashing requires cryptographic MTK authentication.
After flashing a custom recovery ramdisk directly to the boot partition, you must press and hold Volume Up + Power immediately as the phone restarts, without allowing Android to boot into system. If the phone is permitted to boot normally, the stock MIUI init scripts will detect the modified boot image and automatically overwrite the recovery ramdisk with the stock recovery backup stored in the system partition.
The Helio G95 platform implements Android File-Based Encryption (FBE) tied to hardware cryptographic keys stored in the TrustZone. Upgrading across major Android levels (such as Android 11 to Android 12 or 13) or installing community custom recoveries changes encryption metadata flags. Formatting the userdata partition ("Format Data -> yes" in custom recovery) resets encryption tables and prevents bootloops caused by unreadable storage blocks.
With the phone in Fastboot mode and connected via USB, open Windows Device Manager and check under the "Android Device" category. It should display "Android Bootloader Interface". If it appears as an unrecognized device, an unmapped MediaTek Preloader COM port, or generic Kedacom USB with a yellow exclamation mark, update the driver manually using the Google USB Driver from the Android SDK Platform Tools.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.