Xiaomi

Xiaomi Redmi Note 14 Pro+ 5G (amethyst): Stock Fastboot Flashing Guide

Complete firmware flashing guide for the Xiaomi Redmi Note 14 Pro+ 5G using Mi Flash Tool. Covers Xiaomi Redmi Note 14 Pro+ 5G (amethyst), Snapdragon 7s Gen 3 drivers, and Mi Flash Tool procedures.

Xiaomi Redmi Note 14 Pro+ 5G September 2024
Models
24115RA8EG (Global / UK), 24115RA8EC (China), 24115RA8EI (India)
CPU
Octa-core (1x2.50 GHz Cortex-A720 & 3x2.40 GHz Cortex-A720 & 4x1.80 GHz Cortex-A520)
GPU
Adreno 810
RAM
12 GB / 16 GB LPDDR4X / LPDDR5
Storage
256 GB / 512 GB UFS 3.1
Display
6.67" 1.5K 120Hz Curved AMOLED, 2712x1220 pixels, 3000 nits peak, Victus 2
Battery
6200 mAh (China 90W) / 5110 mAh (Global 120W HyperCharge)
OS
Android 16.0 (HyperOS 3.0), Launched on Android 14 (HyperOS 1.0)
Connectivity
5G Dual-SIM, Wi-Fi 6, Bluetooth 5.4, NFC, IR Blaster, Under-display Fingerprint, IP68/IP69K
Colors: Midnight Black Mirror Porcelain White Twilight Purple

About the Xiaomi Redmi Note 14 Pro+ 5G

This workshop guide provides step-by-step bench instructions to flash official stock Fastboot firmware to the Xiaomi Redmi Note 14 Pro+ 5G (September 2024) using Mi Flash Tool. Writing multi-gigabyte system and dynamic super partitions to Qualcomm's Qualcomm Snapdragon 7s Gen 3 (SM7635) platform over UFS 3.1 storage requires stable USB driver handshakes and correct batch script selection.

Whether your phone is trapped in a startup bootloop, recovering from corrupted partitions, or returning to clean official HyperOS 3.0 (Android 16.0), follow the verified prerequisites, battery precautions, and step-by-step flashing procedures detailed below.

Which Flash Mode Should You Use?

Qualcomm EDL 9008 Deep Flash Mode

Emergency download mode accessed via motherboard test points to revive hard-bricked devices unable to enter Fastboot.

How to enter
Remove rear cover, disconnect battery, bridge motherboard test points while plugging in USB
Requires
PC with Qualcomm HS-USB QDLoader 9008 drivers, authorized Mi service account

Recovery Sideload & Local Update

Official recovery interface used for installing signed recovery update packages directly over USB or on-device storage.

How to enter
Power off phone, hold Volume Up + Power together until the recovery menu displays
Requires
Official signed HyperOS recovery package, USB Type-C cable

What You Need Before Flashing

1
Unlocked Bootloader

Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility.

2
Windows PC & Drivers

A 64-bit Windows PC with Qualcomm USB drivers and updated Android SDK Platform Tools installed.

3
Battery Charged to 50%+

Ensure the battery has at least 50% charge to prevent shutdown during 9GB+ sparse partition writes.

4
Quality Type-C Cable

Use a certified USB Type-C data sync cable plugged directly into a rear motherboard USB port.

5
Personal Data Backup

Flashing stock Fastboot firmware with "clean all" completely wipes internal storage and applications.

6
Extracted TGZ Package

Decompress the .tgz archive twice using 7-Zip until flash_all.bat is exposed in a clean root directory.

How to Flash the Xiaomi Redmi Note 14 Pro+ 5G β€” Quick Overview

5-step quick reference for the Xiaomi Redmi Note 14 Pro+ 5G. Need visuals or troubleshooting help? The full Mi Flash Tool guide covers everything in detail.

  1. Unlock bootloader with Mi Unlock
  2. Decompress amethyst_eea_global_images_OS3.0.306.0.WOPEUXM_20260908.0000.00_16.0_eea_09bd72abf2.tgz archive twice
  3. Enter Fastboot mode
  4. Configure Mi Flash Tool with "clean all"
  5. Flash firmware and await first boot

Firmware Package for Snapdragon 7s Gen 3 (flash_all.bat)

Official Fastboot firmware packages for the Xiaomi Redmi Note 14 Pro+ 5G are distributed as multi-gigabyte .tgz archives containing raw partition binaries (boot.img, init_boot.img, vendor_boot.img, dtbo.img, vbmeta.img, and sparse super.img dynamic partitions) written via flash_all.bat and Qualcomm/Fastboot protocols across the Snapdragon 7s Gen 3 UFS 3.1 storage controller.

flash_all.bat

Official Xiaomi Redmi Note 14 Pro+ 5G firmware is distributed as multi-gigabyte .tgz archives. Extract the archive twice using 7-Zip until the folder containing "flash_all.bat" and the raw partition images is visible.

Fastboot Flashing Rule: Always select "clean all" (flash_all.bat) when using Mi Flash Tool on imported hardware to avoid triggering the "The system has been destroyed" lock brick.

Xiaomi Redmi Note 14 Pro+ 5G Firmware Versions

Official stock firmware downloads for the Xiaomi Redmi Note 14 Pro+ 5G. Verify your hardware model variant before downloading.

Version Region Android Version Size MD5 Download
OS3.0.306.0.WOPEUXM (HyperOS 3.0) EEA (Europe / UK) Android 16.0 8.4 GB 09bd72abf2fef05d62b65f352ef38f2d ⬇️ Download

This phone has 8 additional regional and custom builds in Fastboot and Xiaomi.eu formats. Browse the complete archive on AndroidFirmwareFile.com β†’

Xiaomi Redmi Note 14 Pro+ 5G β€” Important Notes

The Xiaomi Redmi Note 14 Pro+ 5G houses a high-capacity internal battery supporting up to 120W HyperCharge. Writing full HyperOS 3.0 dynamic super partition images takes approximately 3 to 5 minutes over UFS 3.1. Confirm that your battery has at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during partition writes.

Troubleshooting Xiaomi Redmi Note 14 Pro+ 5G Flashing & HyperOS Errors

Fastbootd Port Re-enumeration Timeout: "FAILED (remote: 'fastbootd transport stalled') during 9GB+ super.img chunk flashing"

When flashing dynamic super partitions on the Snapdragon 7s Gen 3 platform, the phone automatically transitions from bootloader Fastboot into userspace fastbootd. If USB 3.2 ports with aggressive power-saving governors take longer than 10 seconds to re-enumerate the fastbootd interface, the flash script aborts. Workshop technicians suggest connecting directly to a rear motherboard USB port, running Mi Flash Tool as Administrator, and temporarily disabling Windows USB selective suspend.

PMIC & Battery Descriptor Error: "FAILED (remote: 'invalid partition table or PMIC config mismatch')"

Attempting to flash Chinese domestic firmware (WOPCNXM) onto a Global hardware model (24115RA8EG) or vice versa can result in PMIC charging descriptor conflicts. The China model uses a 6,200 mAh silicon-carbon cell with 90W fast charging, while the Global variant features a 5,110 mAh dual-cell battery with 120W charging. Technicians recommend verifying the exact model number on the rear glass or SIM tray before flashing regional builds.

Bootloader Relock Security Trap: "The system has been destroyed / dm-verity failed after flash_all_lock.bat"

Selecting "clean all and lock" (flash_all_lock.bat) when flashing European (WOPEUXM) or Global firmware onto a Chinese domestic hardware unit (24115RA8EC) triggers an immediate bootloader lockout. The Snapdragon bootloader checks the signed vbmeta hash against regional hardware efuses; if mismatched, it refuses to boot. Technicians advise always selecting "clean all" (flash_all.bat) without relocking.

For solving common Mi Flash Tool timeout codes, fastbootd transition delays, and HyperOS recovery issues: Xiaomi Flashing Error Directory β†’

Frequently Asked Questions β€” Xiaomi Redmi Note 14 Pro+ 5G

Ready to Flash?

Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.

Open Full Guide