Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Honor 6
The Honor 6 was released in June 2014, built on the HiSilicon Kirin 920 platform. Produced under internal codename Mulan (models H60-L04, H60-L01, H60-L02, H60-L03, H60-L11, H60-L12, and H60-L21), the handset features a 5.0-inch 1080p JDI display, 3 GB of RAM, and a 3100 mAh battery.
Flashing factory stock firmware cures persistent software errors, repairs corrupted partition tables, and unbricks non-booting devices. Follow the verified file details and step-by-step instructions below to service your phone safely.
Which Flash Mode Should You Use?
Huawei Dload SD-Card Method (Recommended)
Standard factory update method using the 3-button hardware combination with UPDATE.APP on a microSD card or USB OTG drive.
Huawei eRecovery Wi-Fi Restore
Official network recovery method built into EMUI to download and restore matched firmware directly over Wi-Fi.
What You Need Before Flashing
Verify your exact model (H60-L04, H60-L02, H60-L03, H60-L12, H60-L21) before downloading.
A memory card or USB drive formatted as FAT32 with a "dload" folder on the root directory.
Partition flashing takes 5-10 minutes; ensure adequate battery charge before starting.
Use a quality data cable if connecting an OTG adapter or keeping power connected.
Full stock firmware updates erase internal storage; back up files if phone boots.
How to Flash the Honor 6 — Quick Overview
A condensed step-by-step summary specific to the Honor 6. Follow the full Huawei UPDATE.APP guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Format microSD card as FAT32
-
Create "dload" folder and copy UPDATE.APP
-
Insert card into phone
-
Trigger 3-button installation
-
Wait for installation to finish
Firmware Package for Kirin 920 (UPDATE.APP)
Official firmware packages for the Honor 6 are distributed as signed UPDATE.APP container archives. These packages contain partition images for system, recovery, boot, and cust partitions specifically compiled for the HiSilicon Kirin 920 platform.
UPDATE.APP
Official Honor 6 firmware is packaged as UPDATE.APP files. Extract the downloaded zip archive and place UPDATE.APP directly inside the "dload" folder on your memory card or USB drive.
Hardware model matching note: Confirm your hardware model number (such as H60-L04 international vs H60-L02/L12 Unicom vs H60-L03/L21 Mobile) before downloading. Flashing an unmatched carrier package will result in baseband failure or recovery abort.
Honor 6 Firmware Versions
Official stock firmware packages for the Honor 6. Verify your exact model number and regional branch before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V100R001C00B394 |
Global / International (H60-L04) | Android 4.4.2 (EMUI 3.0) | 1.00 GB | — | ⬇️ Download |
C01B860(05013KHN) |
China Mobile (H60-L03) | Android 6.0 (EMUI 4.0.1) | 1.15 GB | ad0609f3726bcf8894293fdb202c33f4 |
⬇️ Download |
B860 |
China Unicom (H60-L12 / H60-L02) | Android 6.0 (EMUI 4.0.1) | 827 MB | 2d1156c81458b97b99abfbd6776ca69b |
⬇️ Download |
B860 |
China Mobile Dual SIM (H60-L21) | Android 6.0 (EMUI 4.0.1) | 809 MB | db4e6e36c9ad2308cd51f993e144787f |
⬇️ Download |
This phone family has 11 additional maintenance releases, fastboot line-flash packages, and factory board software files. Browse the complete archive on AndroidFirmwareFile.com →
Honor 6 — Important Notes
The Honor 6 is equipped with a 3100 mAh internal battery. Full partition writing and checksum verification take 5 to 10 minutes. Ensure the device has at least 50% charge before initiating the 3-button installation to prevent power interruption during system writing.
Troubleshooting Honor 6 Flashing & Version Upgrade Errors
Upgrade Failure: "Software install failed at 90%"
Users attempting to jump directly from Android 4.4 KitKat to Android 6.0 Marshmallow (B860) report frequent partition size errors. Community discussions on XDA recommend applying an intermediate Android 5.1.1 Lollipop package (such as B526 or B535) before flashing the final Marshmallow build.
Baseband Failure: "No Service / Unknown IMEI"
Flashing cross-carrier firmware (such as China Mobile H60-L01/L03 builds onto international H60-L04 hardware) corrupts the modem partition. Repair technicians suggest restoring the stock C00/C01 package matching your handset's specific back-panel model number.
Recovery Rejection: "UPDATE.APP signature check aborted"
If custom recoveries like TWRP are installed, official Huawei Dload packages will refuse to write system partitions. Forum guides suggest using the Honor MultiTool to reflash the stock recovery image before initiating the Dload upgrade.
For solving common EMUI "Software install failed" messages and recovery verification issues: Huawei & EMUI Flashing Error Directory →
Frequently Asked Questions — Honor 6
Power off the device completely. Insert your microSD card containing the "dload" folder. Press and hold Volume Up, Volume Down, and Power simultaneously until the EMUI update installation screen appears on the display.
This error means the firmware build does not match your exact hardware model (for example, attempting to flash China Unicom H60-L02 firmware onto an international H60-L04 device), the microSD card is formatted as NTFS/exFAT instead of FAT32, or UPDATE.APP was placed in a nested folder.
Yes. Format a USB flash drive as FAT32, place the UPDATE.APP inside a root folder named "dload", connect it with a microUSB OTG adapter, and press the same 3-button combination.
Power off the handset. Press and hold Volume Up and Power together until the Honor logo appears, then release Power and keep holding Volume Up to enter recovery mode. Select "Wipe cache partition", then choose "Wipe data/factory reset".
Ready to Flash?
Follow the full step-by-step Huawei UPDATE.APP guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.