Huawei

Huawei GR5 (KII Series): Stock Firmware Flashing Guide

Complete firmware flashing guide for the Huawei GR5 using Huawei UPDATE.APP. Covers KII-L21, KII-L22, KII-L05 variants, FAT32 memory card setup, and EMUI dload procedures.

Huawei GR5 January 2016
Models
KII-L21, KII-L22, KII-L23, KII-L33, KII-L05
CPU
Octa-core (4x1.5 GHz & 4x1.2 GHz Cortex-A53)
GPU
Adreno 405
RAM
2GB / 3GB
Storage
16GB eMMC 4.5, expandable via dedicated microSD slot up to 128GB
Display
5.5" IPS LCD, FHD 1080Γ—1920 pixels (16:9 ratio, 401 ppi)
Battery
3000 mAh (non-removable, 5V/1A 5W charging)
OS
Android 5.1.1 (EMUI 3.1) / Android 6.0.1 (EMUI 4.0)
Connectivity
4G LTE (Cat.4), Wi-Fi 802.11 b/g/n, Bluetooth 4.1, microUSB 2.0, GPS, 3.5mm jack
Colors: Silver Gray Gold

About the Huawei GR5

The Huawei GR5 was released in January 2016, built on the Qualcomm Snapdragon 616 (MSM8939v2) processor. Featuring a 5.5-inch Full HD display, a 3000 mAh battery, and a 13 MP rear camera, the Kiwi family includes international editions (KII-L21), Canadian models (KII-L05), and Latin American variants.

Flashing factory stock firmware via Huawei dload unbricks boot-looping phones, restores factory software integrity, and removes persistent system errors. Follow the verified preparation steps and procedural guide below to service your phone safely.

Which Flash Mode Should You Use?

Qualcomm QFIL / EDL 9008 Mode

Low-level Qualcomm hardware recovery method for unbricking dead phones. Writes partition images directly to eMMC via Emergency Download mode.

How to enter
Disconnect battery flex, bridge EDL testpoints to ground, and connect microUSB cable to PC
Requires
Windows PC, Qualcomm QDLoader drivers, QFIL / QPST, motherboard testpoint access

Huawei eRecovery Mode (Emergency Restore)

Emergency recovery interface built into the stock bootloader. Used to wipe user data or attempt automated Wi-Fi package recovery.

How to enter
Power off phone, connect microUSB cable, and hold Volume Up until eRecovery menu appears
Requires
microUSB charging cable, Wi-Fi network connection, PC or charger

What You Need Before Flashing

1
FAT32 MicroSD Card

An 8GB or larger microSD card formatted with FAT32 file system and MBR partition layout. exFAT is not supported by Huawei stock recovery.

2
Matched Regional Firmware

Download the package matching your exact model number and regional Cust tag (such as KII-L21 C185 MEA). Check Settings or the back cover before flashing.

3
40%+ Battery Level

Ensure the non-removable 3000mAh battery holds at least 40% charge to prevent unexpected power failure during partition flashing.

4
MicroUSB Data Cable

Use a verified microUSB data cable connected directly to the device. Damaged or charge-only cables will interrupt data transfer.

5
Data Backup

Flashing stock firmware via dload completely wipes user data, internal memory, and installed apps. Back up personal files before proceeding.

How to Flash the Huawei GR5 β€” Quick Overview

A fast reference for flashing the Huawei GR5 (Snapdragon 616) using Huawei UPDATE.APP. For the complete walkthrough with images and error troubleshooting, see the full guide.

  1. Format a microSD card to FAT32 MBR on your PC
  2. Extract firmware archive and create "dload" folder
  3. Insert the microSD card into the dedicated slot
  4. Trigger 3-Button Dload recovery mode
  5. Allow automated partition flashing to complete

Firmware Package for Snapdragon 616

Official Huawei stock firmware packages for the Huawei GR5 (Kiwi) are provided as container archives housing UPDATE.APP for on-device dload restoration, or as raw XML partition structures for Qualcomm QPST and QFIL service unbricking.

UPDATE.APP

Official Huawei stock firmware is supplied as an archive containing UPDATE.APP. Extract the package and ensure UPDATE.APP sits directly inside a folder named "dload" on the root of your FAT32 memory card.

The Huawei GR5 is built on the 28nm Qualcomm Snapdragon 616 (MSM8939v2) platform under development codename Kiwi (KII). Hardware variations include KII-L21 (dual-SIM Europe/MEA), KII-L22 (Asia Pacific), KII-L05 (Canada), and KII-L23/L33 (Latin America).

Flashing stock firmware via dload does not require an unlocked bootloader. However, Huawei bootloader security validates the carrier Cust string (e.g. C464 Turkey, C185 Middle East, C654 Canada, C636 Asia Pacific). Cross-flashing mismatched Cust builds via dload will be rejected at the verification stage.

Huawei GR5 Firmware Versions

Representative tested builds for each confirmed hardware model variant of the Huawei GR5. Always confirm your model and regional Cust tag before flashing.

Version Region Android Version Size MD5 Download
C185B321 (05013LEV) KII-L21 β€” Middle East & Africa (Dual SIM) Android 6.0.1 (EMUI 4.0.2) 1.37GB β€” ⬇️ Download
C636B320 (05013MCS) KII-L22 β€” Asia Pacific / Taiwan Android 6.0.1 (EMUI 4.0) 1.58GB β€” ⬇️ Download
C654B330 (Rogers) KII-L05 β€” Canada Android 6.0.1 (EMUI 4.0) 1.63GB β€” ⬇️ Download
C900B076 (05021WXE) KII-L33 β€” Latin America / Chile Board Android 5.1.1 (EMUI 3.1) 743MB β€” ⬇️ Download

This device family has 8 verified packages across European, Middle Eastern, Canadian, and Latin American releases. Browse the complete 8-package archive on AndroidFirmwareFile.com β†’

Huawei GR5 β€” Important Notes

The Huawei GR5 launched with Android 5.1.1 Lollipop (EMUI 3.1) and received official regional upgrades to Android 6.0.1 Marshmallow (EMUI 4.0). Performing a stock dload reflash restores original system partitions and clears software-induced bootloops while preserving Google Mobile Services certification.

In hard-brick scenarios where the handset cannot boot into stock recovery or fastboot, technicians use Qualcomm Emergency Download (EDL 9008) mode. Shorting the motherboard hardware testpoints allows Qualcomm Flash Image Loader (QFIL) or QPST to flash factory board software directly to the internal eMMC 4.5 flash memory blocks.

Troubleshooting Huawei GR5 Flashing & Qualcomm EDL Errors

Qualcomm MSM8939v2 Sahara Protocol Timeout (0x10000002 / Hello Packet Timeout)

Community repair discussions report this error occurring in QFIL/QPST during initial EDL 9008 communication. Technicians suggest this typically happens due to front-panel USB 3.0 controller latency or attempting testpoint connection with the battery flex cable still connected to the board. Disconnecting the battery and using a direct rear USB 2.0 port resolves the handshake timeout.

EMUI Recovery Cust Verification Failure: "Software install failed - Incompatible partition table"

Repair forum members recommend verifying that the package Cust tag matches the original motherboard carrier assignment. On Qualcomm MSM8939v2 devices, stock recovery checks the security certificate in oeminfo prior to extracting system images; flashing Asian C636 packages or sibling Honor 5X KIW packages on European KII-L21 boards results in immediate verification failure.

MicroSD Card File System Rejection: Phone Boots into Blank Screen or Fastboot Rescue

Usually caused by formatting the storage card as exFAT or GPT. Huawei stock EMUI recovery only recognizes memory cards formatted with FAT32 file system under an MBR partition layout, with UPDATE.APP located directly inside the root dload directory without intermediate subfolders.

For complete Huawei dload error resolutions, testpoint diagrams, and driver walkthroughs: Huawei Flashing & Dload Error Directory β†’

Frequently Asked Questions β€” Huawei GR5

Ready to Flash?

Follow the full step-by-step Huawei UPDATE.APP guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.

Open Full Guide