Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Huawei P40 Pro 5G
The Huawei P40 Pro 5G was released in March 2020, built on the HiSilicon Kirin 990 5G platform. Marketed under model series ELS-NX9, ELS-N29, ELS-N04, ELS-N39, ELS-AN00, and ELS-TN00 (internal codename Elsa), the device features a 6.58-inch 90Hz Quad-Curve OLED display, 8 GB of RAM, and a Leica Ultra Vision quad-camera array.
Flashing factory stock firmware cures persistent software errors, repairs corrupted partition tables, and unbricks non-booting devices. Follow the verified file details and step-by-step instructions below to service your phone safely.
Which Flash Mode Should You Use?
Huawei Dload via NM Card or USB Type-C OTG (Recommended)
Standard factory update method using the 3-button hardware combination with UPDATE.APP on an NM Card or USB Type-C OTG flash drive.
Huawei eRecovery Wi-Fi Restore
Official network recovery method built into EMUI to download and restore matched firmware directly over Wi-Fi.
What You Need Before Flashing
Confirm your exact model is ELS-NX9, ELS-N29, ELS-N04, ELS-N39, ELS-AN00, or ELS-TN00.
A memory card or USB drive formatted as FAT32 with a "dload" folder on the root directory.
Firmware writing takes several minutes; maintain adequate battery reserve.
Use a quality OTG adapter or cable if connecting an external USB flash drive.
Full stock firmware updates erase internal storage; back up files if phone boots.
How to Flash the Huawei P40 Pro 5G — Quick Overview
These 5 steps are tailored to the Huawei P40 Pro 5G (Kirin 990 5G). For screenshots, an interactive checklist, and troubleshooting, open the full Huawei UPDATE.APP guide.
-
Format NM Card or USB Type-C drive as FAT32
-
Create "dload" folder and copy UPDATE.APP
-
Connect storage to phone
-
Trigger 3-button installation
-
Wait for installation to finish
Firmware Package for Kirin 990 5G (UPDATE.APP)
Official firmware packages for the Huawei P40 Pro 5G are distributed as signed UPDATE.APP container archives. These packages contain partition images for system, vendor, kernel, modem, and cust partitions specifically compiled for the HiSilicon Kirin 990 5G architecture.
UPDATE.APP
Official Huawei P40 Pro 5G firmware is distributed as UPDATE.APP packages. Extract the downloaded zip file and copy UPDATE.APP directly inside the "dload" folder on your NM card or USB Type-C flash drive.
Regional verification note: Confirm your phone model number (ELS-NX9, ELS-N29, ELS-N04, ELS-N39, ELS-AN00, ELS-TN00) and regional Cust code before downloading. Flashing an unmatched regional package will cause EMUI recovery verification to fail and abort installation.
Huawei P40 Pro 5G Firmware Versions
Official stock firmware packages for the Huawei P40 Pro 5G. Verify your exact model number and regional branch before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
12.0.0.228(C432E3R6P5) |
Europe Open (ELS-NX9 / ELS-N29) | Android 10 / 11 (EMUI 12.0.0) | 5.40 GB | — | ⬇️ Download |
11.0.0.249(C185E6R6P3) |
Middle East & Africa (ELS-N29 / ELS-NX9) | Android 10 (EMUI 11.0.0) | 5.30 GB | — | ⬇️ Download |
10.1.0.112(C605E7R2P1) |
Latin America (ELS-N04 / ELS-NX9) | Android 10 (EMUI 10.1.0) | 4.50 GB | — | ⬇️ Download |
11.0.0.178(C301E5R2P4) |
Russia & CIS (ELS-N39) | Android 10 (EMUI 11.0.0) | 5.50 GB | — | ⬇️ Download |
10.1.0.155 SP2(C00E155R6P1) |
China All-Netcom (ELS-AN00) | Android 10 (EMUI 10.1.0) | 6.20 GB | — | ⬇️ Download |
10.1.0.155 SP2(C00E155R6P1) |
China Telecom (ELS-TN00) | Android 10 (EMUI 10.1.0) | 6.40 GB | — | ⬇️ Download |
This phone family has 10 additional regional builds, service packages, and maintenance updates. Browse the complete archive on AndroidFirmwareFile.com →
Huawei P40 Pro 5G — Important Notes
The Huawei P40 Pro 5G is equipped with a 4200 mAh battery. Installing full stock firmware takes 5 to 10 minutes. Ensure the device has at least 50% charge before beginning the update to prevent power interruption during system writing.
Common Errors on the Huawei P40 Pro 5G
EMUI Error: "Software install failed / Check failed"
The firmware build or regional Cust code does not match your device model. Confirm your phone's model code (ELS-NX9, ELS-N29, or ELS-AN00) and download the matching regional package.
Phone starts normally into EMUI without recognizing the update
Make sure the folder is named exactly "dload" in all lowercase letters and resides directly on the root of your FAT32 storage drive, not inside an archive or subfolder.
Phone stuck in a bootloop after update completes
Residual cache from earlier software builds can delay startup. Power off, hold Volume Up + Power to launch EMUI Recovery, and perform a wipe cache partition and factory reset.
For solving common EMUI "Software install failed" messages and recovery verification issues: Huawei & EMUI Flashing Error Directory →
Frequently Asked Questions — Huawei P40 Pro 5G
The Huawei P40 Pro uses Huawei Nano Memory (NM Cards) or USB Type-C OTG flash drives. Place the UPDATE.APP inside a root folder named "dload" on a FAT32-formatted NM card or USB-C flash drive, plug it in, power off the device, and hold Volume Up + Volume Down + Power together until the EMUI update starts.
This error means the regional Cust code of the package does not match your phone (for example, attempting to flash Middle East C185 firmware onto a European C432 device), the drive is formatted in exFAT or NTFS instead of FAT32, or the file is an older build than what is currently installed.
Yes. Any standard USB flash drive formatted as FAT32 connected via a USB Type-C OTG adapter works reliably for 3-button Dload installations on the P40 Pro.
Power off the handset completely. Hold Volume Up and Power together until the Huawei logo appears, then release Power and keep holding Volume Up to enter EMUI Recovery. Use the touchscreen or volume keys to select "Clear data", then perform a "Wipe cache partition" and "Factory reset".
Ready to Flash?
Follow the full step-by-step Huawei UPDATE.APP guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.