Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi 3 / Mi 4
This workshop guide provides step-by-step bench instructions to flash official stock Fastboot firmware to the Xiaomi Mi 3 / Mi 4 (December 2013 / July 2014) using Mi Flash Tool. Writing system and partition binaries to Qualcomm's Qualcomm Snapdragon 800 (Mi 3) / Snapdragon 801 (Mi 4) platform over eMMC storage requires stable USB driver handshakes and correct batch script selection.
Whether your phone is trapped in a startup bootloop, recovering from corrupted partitions, or returning to clean official MIUI 9 (Android 6.0.1 Marshmallow), follow the verified prerequisites, battery precautions, and step-by-step flashing procedures detailed below.
Which Flash Mode Should You Use?
Xiaomi Mi Flash Fastboot Flashing (Recommended)
Standard official method for restoring stock MIUI firmware using an unlocked bootloader and Mi Flash Tool in Fastboot mode.
Qualcomm EDL 9008 Emergency Unbrick
Low-level hardware unbrick mode for flashing raw partition images directly to eMMC storage when Fastboot mode is inaccessible.
Custom Recovery (TWRP Installation)
Custom recovery environment used for installing multi-language community packages like xiaomi.eu or managing root access.
What You Need Before Flashing
Fastboot flashing requires an unlocked bootloader via the Xiaomi Mi Unlock utility on newer MIUI builds.
A 64-bit Windows PC with Qualcomm QDLoader 9008 drivers and updated Android SDK Platform Tools installed.
Ensure the battery has at least 50% charge to prevent shutdown during eMMC partition writes.
Use a certified microUSB data sync cable plugged directly into a rear motherboard USB port.
Flashing stock Fastboot firmware with "clean all" completely wipes internal storage and applications.
Decompress the .tgz archive twice using 7-Zip until flash_all.bat is exposed in a clean root directory.
How to Flash the Xiaomi Mi 3 / Mi 4 β Quick Overview
A fast reference for flashing the Xiaomi Mi 3 / Mi 4 (Snapdragon 800/801) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Verify phone codename is cancro
-
Decompress Fastboot TGZ archive twice
-
Enter Fastboot mode
-
Configure Mi Flash Tool with "clean all"
-
Flash firmware and await first boot
Firmware Package for Snapdragon 800/801 (flash_all.bat)
Official Fastboot firmware packages for the Xiaomi Mi 3 & Mi 4 are distributed as .tgz archives containing raw partition binaries (boot.img, recovery.img, system.img, cache.img, userdata.img, emmc_appsboot.mbn) written via flash_all.bat or Qualcomm EDL rawprogram0.xml across the Snapdragon 800/801 eMMC storage controller.
flash_all.bat
Official Xiaomi Mi 3 & Mi 4 firmware is distributed as a compressed .tgz archive. Extract the archive twice using 7-Zip until the folder containing "flash_all.bat" and the raw partition images is visible.
Fastboot Flashing Note: Always select "clean all" (flash_all.bat) when using Mi Flash Tool on imported hardware to avoid locking the bootloader against custom or community firmware.
Xiaomi Mi 3 / Mi 4 Firmware Versions
Official stock firmware downloads for the Xiaomi Mi 3 / Mi 4. Verify your hardware model variant before downloading.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V9.5.7.0.MXDMIFA (MIUI 9 Global) |
Global (MI / Worldwide) | Android 6.0.1 | 1.12 GB | bbfc0f395199b6aaf00bc1a94561e929 |
β¬οΈ Download |
This unified platform has 6 additional regional, recovery, and community packages in the full archive. Browse the complete archive on AndroidFirmwareFile.com β
Xiaomi Mi 3 / Mi 4 β Important Notes
The Xiaomi Mi 3 and Mi 4 house a 3,050 mAh or 3,080 mAh internal battery supporting Qualcomm Quick Charge 2.0. Writing full MIUI 9 partition images takes approximately 2 to 4 minutes over eMMC storage. Confirm that your battery has at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during partition writes.
Troubleshooting Xiaomi Mi 3 & Mi 4 Flashing & MIUI Errors
Fastboot Partition Allocation Rejection: "FAILED (remote: partition table doesn't exist)"
When flashing an updated Marshmallow Fastboot ROM over an older KitKat dual-partition layout, Fastboot may reject writes if the repartition script is interrupted. Technicians recommend executing flash_all.bat directly so the script runs partition.mbn and reallocates unified partition boundaries before streaming system binaries.
Script Execution Interruption: "Press any key to continue . . ." stall
On modern Windows 10 and Windows 11 64-bit systems, third-party USB 3.0 host controllers can drop the Fastboot USB communication pipe during large system.img writes. Workshop technicians advise connecting the phone to a native USB 2.0 port on the motherboard rear panel and ensuring updated Google WinUSB drivers are bound in Device Manager.
Emergency Recovery Drop: "Device communication lost during rawprogram streaming"
When attempting emergency recovery over Qualcomm 9008 mode, loose microUSB cable seating or unverified serial driver handshakes cause transfer terminations. Technicians recommend connecting with a short certified data cable directly to an onboard USB port and confirming the assigned COM port in Device Manager under Ports (COM & LPT).
For solving common Mi Flash Tool timeout codes, Qualcomm 9008 connection drops, and TWRP recovery issues: Xiaomi Flashing Error Directory β
Frequently Asked Questions β Xiaomi Mi 3 / Mi 4
No. The Qualcomm Snapdragon 800 and 801 (MSM8974AB/MSM8974AC) platform on cancro does not enforce server-side firehose cryptographic authorization. Technicians can initiate 9008 mode by bridging the motherboard test points or using a specialized deep flash cable, allowing Mi Flash Tool to flash rawprogram0.xml and patch0.xml directly without account authentication.
When moving from stock official MIUI to the community xiaomi.eu release, a standard factory reset is insufficient. Workshop technicians recommend booting into TWRP recovery, navigating to Wipe > Advanced Wipe, selecting Dalvik / ART Cache, System, Data, and Cache partitions to format them cleanly, and rebooting back into recovery before copying and flashing the ROM zip file.
Early batches of the Mi 3 and Mi 4 shipped with an open bootloader out of the factory. However, Xiaomi introduced bootloader security enforcement in later MIUI 7 and MIUI 8 updates. If your device has updated bootloader binaries, running fastboot flash commands requires official bootloader unlocking through Mi Unlock, or flashing via EDL mode which bypasses bootloader lock flags.
Before flashing any files, put the phone into Fastboot mode by holding Volume Down and Power, then execute "fastboot getvar product" from a command prompt. If the terminal returns "cancro", the device features Qualcomm hardware and is fully compatible with these packages. If it does not recognize fastboot commands or connects as APX USB hardware ID 0955:7140, it is the Nvidia Tegra 4 pisces model and must never receive cancro firmware.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.