Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi 5s Plus
The Xiaomi Mi 5s Plus (codename: natrium) launched in September 2016 on Qualcomm's Qualcomm Snapdragon 821 MSM8996 Pro-AC (14nm) platform with UFS 2.0 storage, dual 13 MP ClearSight cameras, and Quick Charge 3.0.
Whether you need to rescue a bricked unit via Qualcomm EDL 9008 with natrium_global_images_V10.2.4.0.OBGMIXM_20190424.0000.00_8.0_global_07f157530a.tgz or upgrade to Xiaomi.eu MIUI 11 using twrp-3.7.0_9-0-natrium.img, follow the steps below.
Which Flash Mode Should You Use?
64-Bit Mi Flash Tool β UFS EDL 9008 (Locked or Bricked)
Writes multi-LUN UFS 2.0 factory partitions over Qualcomm QDLoader 9008 without needing an unlocked bootloader.
Mi Flash Tool / Fastboot CLI (Unlocked Bootloader)
Executes flash_all.bat or installs twrp-3.7.0_9-0-natrium.img directly over the Android Bootloader USB-C interface.
TWRP / Local Updater (Recovery ZIP)
Installs xiaomi.eu_multi_MI5SPlus_V11.0.2.0.OBGCNXM_v11-8.0.zip inside Official TWRP 3.7.0_9-0 or miui_MI5SPlusGlobal_V10.2.4.0.OBGMIXM_d3a51ce7d3_8.0.zip via MIUI Updater.
Essential Setup Before Flashing Mi 5s Plus (natrium)
Legacy 32-bit Mi Flash versions fail on UFS 2.0 sector alignment. Always use 64-bit Mi Flash on 64-bit Windows.
Plug a solid Type-C data cable straight into a rear motherboard USB 2.0 port so multi-LUN UFS transfers never stall.
Extract the .tgz download twice using 7-Zip into C:\natrium_fw\ without spaces so flash_all.bat and XML maps resolve cleanly.
Confirm the 3,800 mAh battery holds healthy charge (or re-seat the internal battery flex if opening the cover for test points).
Mi 5s Plus lacks a microSD slot and flash_all.bat erases internal storage. Copy photos off first, and back up /persist in TWRP.
64-Bit Mi Flash & UFS EDL 9008 Steps for Snapdragon 821
A condensed step-by-step summary specific to the Xiaomi Mi 5s Plus. Follow the full Mi Flash Tool guide for screenshots, an interactive progress checklist, and complete troubleshooting.
-
Install 64-bit Mi Flash Tool (2016.08.30+) and Qualcomm HS-USB QDLoader 9008 drivers
-
Extract natrium_global_images_V10.2.4.0.OBGMIXM_20190424.0000.00_8.0_global_07f157530a.tgz twice to C:\natrium_fw\
-
Boot to EDL 9008 (adb reboot edl / test points) if locked, or Fastboot (Vol Down + Power) if unlocked
-
Point 64-bit Mi Flash Tool to C:\natrium_fw\, click Refresh, and pick "clean all"
-
Click Flash, allow UFS 2.0 image transfers to complete, and hold Power 10 seconds to reboot
Finding flash_all.bat & 8996 UFS Firehose Files in Snapdragon 821 Packages
Official Xiaomi Mi 5s Plus Fastboot packages ship as double-packed .tgz archives. Unpacking twice with 7-Zip exposes flash_all.bat at the top directory alongside an images folder holding prog_ufs_firehose_8996_ddr.elf, persist.img, and rawprogram0β5 XML maps:
flash_all.bat
Extracting natrium_global_images_V10.2.4.0.OBGMIXM_20190424.0000.00_8.0_global_07f157530a.tgz twice with 7-Zip places flash_all.bat at the outer level next to the images folder containing prog_ufs_firehose_8996_ddr.elf, persist.img, and rawprogram0β5 XML maps. Pick the outer directory in 64-bit Mi Flash Tool.
Codename natrium (model 2016070) identifies ONLY the 5.7-inch dual-camera Mi 5s Plus. Never load images built for the smaller 5.15-inch Mi 5s (capricorn) or Mi 5 (gemini).
Point 64-bit Mi Flash Tool at the outer folder holding flash_all.bat (for example C:\natrium_fw\), never the inner images directory.
Keep "clean all" selected; choosing "clean all and lock" on cross-regional ROMs will freeze startup.
Xiaomi Mi 5s Plus Firmware Versions
Tested Global MIUI 10, China MIUI 11, Xiaomi.eu MIUI 11, and Official TWRP 3.7.0_9-0 files for the Xiaomi Mi 5s Plus (natrium). Browse the full archive below for CDN mirrors and China Recovery ZIP details.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V10.2.4.0.OBGMIXM |
Global (MI / MI5SPlusGlobal) β MIUI 10.2 | Android 8.0 (Oreo), Apr 2019 | 1.71 GB | 07f157530a72675bffd186caa7a06dcc |
β¬οΈ Download |
V10.2.4.0.OBGMIXM (OTA) |
Global Recovery ZIP | Android 8.0 (Oreo), Apr 2019 | 1.51 GB | d3a51ce7d3ed9ac784717d6cf3bce8da |
β¬οΈ Download |
V11.0.2.0.OBGCNXM |
China (CN / MI5SPlus) β MIUI 11 Final | Android 8.0 (Oreo), Oct 2019 | 2.09 GB | 1c44eae9c1d63301dcffd2d6f0745939 |
β¬οΈ Download |
V11.0.2.0.OBGCNXM (Xiaomi.eu) |
Europe / Multilingual MIUI 11 (TWRP) | Android 8.0 (Oreo), Jan 2020 | 1.4 GB | 56efee0ce0b8515ef49c07dcad1d4fa3 |
β¬οΈ Download |
TWRP 3.7.0_9-0 |
Official Custom Recovery (natrium) | Fastboot / TWRP IMG | 20.04 MB | 656fe4f45aed31b3e197d51d7c09b98d |
β¬οΈ Download |
Browse all 6 Android 8.0 MIUI 10, MIUI 11, Xiaomi.eu & TWRP files on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Choosing UFS EDL 9008, Fastboot & TWRP Recovery Options
The Xiaomi Mi 5s Plus (codename natrium, model 2016070) runs Qualcomm's Snapdragon 821 (MSM8996 Pro-AC) with UFS 2.0 flash storage. Using natrium_global_images_V10.2.4.0.OBGMIXM_20190424.0000.00_8.0_global_07f157530a.tgz or China MIUI 11 (natrium_images_V11.0.2.0.OBGCNXM_20191023.0000.00_8.0_cn_1c44eae9c1.tgz), locked phones recover cleanly via EDL 9008 while unlocked phones flash over Fastboot.
For running Global devices, miui_MI5SPlusGlobal_V10.2.4.0.OBGMIXM_d3a51ce7d3_8.0.zip installs via the Updater app. Unlocked owners upgrading to Xiaomi.eu's MIUI 11 Android 8.0 release (xiaomi.eu_multi_MI5SPlus_V11.0.2.0.OBGCNXM_v11-8.0.zip) should flash twrp-3.7.0_9-0-natrium.img and format Data before installation.
Fixing Mi 5s Plus (natrium) /persist, UFS & TWRP Encryption Errors
Boot Warning: "Find Device storage corrupted" / Missing Dual-Camera Gyro
Occurs if an improper wipe or bad flash damaged the /persist partition on natrium, breaking ClearSight dual-camera calibration and sensors. Extract persist.img from your V10.2.4.0.OBGMIXM or V11.0.2.0.OBGCNXM images directory and restore it cleanly via TWRP or Fastboot/EDL.
Tool Error: "Not enough storage" / UFS Sector Overflow in Old 32-Bit Utility
Legacy 32-bit Mi Flash tools fail on UFS 2.0 4096-byte sector geometry and hit RAM limits pushing 1.7GBβ2.1GB MSM8996 packages. Uninstall 32-bit builds and run a 64-bit Mi Flash Tool release (2016.08.30+ or 2017+) on 64-bit Windows.
Status: "FAILED (remote: Partition flashing is not allowed)"
Happens when running Fastboot flashing against a Mi 5s Plus whose bootloader is still locked. Switch into Qualcomm EDL 9008 mode ("adb reboot edl", a deep-flash USB-C cable, or shorting the rear motherboard test points) and flash via COM port instead.
TWRP Prompt: "Enter Password" / "Unable to mount /data"
Android 8.0 Oreo encryption blocks recovery from reading stock /data before installing xiaomi.eu_multi_MI5SPlus_V11.0.2.0.OBGCNXM_v11-8.0.zip. Inside TWRP, tap Wipe -> Format Data (type "yes"), reboot straight back to Recovery, and flash the Xiaomi.eu ZIP cleanly.
Need troubleshooting for another UFS COM or Fastboot dialog? Mi Flash & UFS Qualcomm EDL Error Directory β
EDL Authorization, Multi-LUN UFS & MIUI 11 Switching Q&A
Yes. Like other 2016 Snapdragon 820/821 Xiaomi models, the Mi 5s Plus (natrium) uses an unauthenticated Firehose loader (prog_ufs_firehose_8996_ddr.elf) inside its Fastboot download. Even on a locked bootloader, entering Qualcomm QDLoader 9008 lets you restore Global MIUI 10 or China MIUI 11 directly without Xiaomi service-center authorization.
Because natrium uses UFS 2.0 flash storage divided into separate LUNs with 4096-byte sectors, the images directory contains six separate rawprogram XML files (rawprogram0.xml through rawprogram5.xml). Selecting the outer folder in 64-bit Mi Flash Tool loads every LUN automatically rather than missing boot or modem blocks.
Yes, provided your bootloader stays unlocked and you strictly select "clean all" (flash_all.bat) β never "clean all and lock" β inside Mi Flash Tool. Switching cleanly formats userdata so incompatible MIUI 10 and MIUI 11 database structures never crash on startup.
Yes, especially before altering stock /persist or userdata partitions. In Fastboot mode on an unlocked handset, execute "fastboot boot twrp-3.7.0_9-0-natrium.img" to launch TWRP temporarily and take a full EFS + persist backup, then run "fastboot flash recovery twrp-3.7.0_9-0-natrium.img" when ready for Xiaomi.eu MIUI 11.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.