Xiaomi

Xiaomi Mi 8 Explorer (ursa): Mi Flash & TWRP Guide

Complete firmware flashing guide for the Xiaomi Mi 8 Explorer Edition using Mi Flash Tool. Covers prerequisites, firmware package setup, and step-by-step instructions.

Xiaomi Mi 8 Explorer Edition July 2018
Models
M1807E8S
CPU
Octa-core (4x 2.8 GHz Kryo 385 Gold & 4x 1.8 GHz Kryo 385 Silver)
GPU
Qualcomm Adreno 630
RAM
8 GB LPDDR4X
Storage
128 GB UFS 2.1 (No microSD slot)
Display
6.21" Super AMOLED, 2248x1080 pixels (HDR10)
Battery
3000 mAh Li-Po, 18W QC 4.0+ / USB-PD via USB Type-C
OS
Android 10.0 Q (MIUI 12.5 Enhanced / V12.5.3.0.QEHCNXM)
Connectivity
Dual Nano-SIM, 4G LTE (incl. B20), Wi-Fi ac, BT 5.0, Dual-freq GPS, NFC (No 3.5mm jack)
Colors: Transparent Black

About the Xiaomi Mi 8 Explorer Edition

The Xiaomi Mi 8 Explorer Edition (codename: ursa, model M1807E8S) launched in July 2018 on Qualcomm's Qualcomm Snapdragon 845 (SDM845, 10nm) flagship chip, pairing a translucent glass back with under-display optical fingerprint scanning and hardware 3D structured-light facial recognition.

Whether you need a full Fastboot reset with ursa_images_V12.5.3.0.QEHCNXM_20211028.0000.00_10.0_cn_9359431ffb.tgz or plan to flash multilingual xiaomi.eu_multi_MI8Explorer_V12.5.3.0.QEHCNXM_v12-10.zip inside TWRP 3.5.2_10-0, follow the steps below carefully.

Which Flash Mode Should You Use?

TWRP 3.5.2_10-0 (Xiaomi.eu & Persist Backup)

Flash twrp-3.5.2_10-0-ursa.img over Fastboot to back up /persist biometric calibration, format FBE data, and install xiaomi.eu_multi_MI8Explorer_V12.5.3.0.QEHCNXM_v12-10.zip.

How to enter
Hold Volume Up + Power from off (or run fastboot boot twrp-3.5.2_10-0-ursa.img) until TeamWin loads
Requires
Unlocked bootloader, twrp-3.5.2_10-0-ursa.img, vbmeta/Format Data readiness

Qualcomm EDL 9008 (Authorized Unbrick Only)

Last-resort Snapdragon 845 hardware recovery path when Fastboot is wiped. Requires authorized Xiaomi EDL account credentials or hardware testpoint access.

How to enter
Triggered via fastboot oem edl (unlocked units) or internal motherboard testpoints with battery disconnected
Requires
Qualcomm QDLoader 9008 drivers, authorized EDL handler, prog_ufs_firehose_sdm845.elf

Essential Checks Before Flashing Mi 8 Explorer (ursa)

1
Verify Codename Is ursa & Check ARB Index

Run "fastboot getvar product" (must be ursa) and "fastboot getvar anti" so you never trigger an anti-rollback brick.

2
Plan a /persist Biometric Backup

Back up /persist in TWRP before flashing custom builds to keep optical fingerprint & 3D Face ID sensors calibrated.

3
Install Google Fastboot & Qualcomm 9008 Drivers

Ensure 64-bit Windows recognizes Android Bootloader Interface cleanly before running Mi Flash Tool.

4
Charge 3,000 mAh Battery Above 50%

Maintain solid charge before wiping 128 GB UFS 2.1 storage across Fastboot or TWRP installations.

5
Back Up Photos & Internal Files Off-Device

Clean Fastboot installs and TWRP Format Data both completely wipe internal UFS 2.1 user storage.

Fastboot & TWRP Walkthrough for Snapdragon 845 (ursa)

5-step quick reference for the Xiaomi Mi 8 Explorer Edition. Need visuals or troubleshooting help? The full Mi Flash Tool guide covers everything in detail.

  1. Check fastboot getvar product returns "ursa" and inspect anti-rollback index via fastboot getvar anti
  2. Double-extract ursa_images_V12.5.3.0.QEHCNXM_20211028.0000.00_10.0_cn_9359431ffb.tgz to C:\ursa_fw\
  3. Install Qualcomm & Google Fastboot drivers, then boot Fastboot (Volume Down + Power) into rear USB
  4. Load C:\ursa_fw\ in Mi Flash Tool, verify "clean all", or boot twrp-3.5.2_10-0-ursa.img for Xiaomi.eu
  5. Wait 4–6 minutes for MIUI setup or confirm persist calibration stays intact after first boot

Unpacking flash_all.bat & UFS Images in Snapdragon 845 Packages

Official Mi 8 Explorer Edition (ursa) Fastboot releases arrive as double-compressed .tgz files. Extracting twice with 7-Zip places flash_all.bat at the top directory beside the images folder holding system, vendor, boot, abl.elf, and prog_ufs_firehose_sdm845:

flash_all.bat

Double-extracting ursa_images_V12.5.3.0.QEHCNXM_20211028.0000.00_10.0_cn_9359431ffb.tgz exposes flash_all.bat and clean_all_and_lock.bat beside the images directory containing prog_ufs_firehose_sdm845.elf, system.img, vendor.img, and boot.img. Select only the outer directory inside Mi Flash Tool.

Confirm codename ursa (M1807E8S) before touching any firmware—never mix equuleus (Mi 8 Pro) or dipper (Mi 8) files.

Point Mi Flash Tool to the outer folder holding flash_all.bat (such as C:\ursa_fw\), never inside images\.

Keep "clean all" selected; use "clean all and lock" strictly when restoring untouched official China V12.5.3.0.QEHCNXM software.

Xiaomi Mi 8 Explorer Edition Firmware Versions

Verified Fastboot, Xiaomi.eu, and Official TWRP builds for Xiaomi Mi 8 Explorer Edition (ursa). Grab the signed China Recovery OTA ZIP too from AndroidFirmwareFile.

Version Region Android Version Size MD5 Download
V12.5.3.0.QEHCNXM China (CN) — Final Official MIUI 12.5 Fastboot Android 10.0 Q (Oct 2021) 2.90 GB 9359431ffb77258c12ce411858529fd8 ⬇️ Download
V12.5.3.0.QEHCNXM (Xiaomi.eu) Multilang + Google Play (TWRP ZIP) Android 10.0 Q (MIUI 12.5 Stable) 2.57 GB 18408e118768162b5992da9d02191639 ⬇️ Download
TWRP 3.5.2_10-0 Official Custom Recovery (ursa) Android 10.0 Recovery (Apr 2021) 34.30 MB 6cef514e179b362162e7910f74730f38 ⬇️ Download

Need the official China Recovery ZIP alongside Fastboot, Xiaomi.eu & TWRP? View all 4 ursa builds on AndroidFirmwareFile.com → View full archive on AndroidFirmwareFile.com →

Mi Flash, Xiaomi.eu & Qualcomm EDL Options

Restoring the Xiaomi Mi 8 Explorer Edition (ursa) starts by matching the package to your bootloader state. On unlocked handsets, ursa_images_V12.5.3.0.QEHCNXM_20211028.0000.00_10.0_cn_9359431ffb.tgz restores clean Android 10 China MIUI 12.5 Enhanced directly through Mi Flash Tool.

If you want full multilingual support and Google Play Services, boot twrp-3.5.2_10-0-ursa.img after unlocking, run Format Data, back up /persist first, and flash xiaomi.eu_multi_MI8Explorer_V12.5.3.0.QEHCNXM_v12-10.zip.

Fixing Mi 8 Explorer (ursa) EDL Auth, FBE Decryption & ARB Errors

Qualcomm EDL Auth Block ("Sahara Fail / Unauthorized Firehose" in QFIL)

TWRP Scrambled Folder Names & Decryption Failure on Android 10 FBE

Anti-Rollback Protection ("fastboot getvar anti" Downgrade Rejection)

Need help decoding another QFIL, Fastboot, or TWRP status alert? Snapdragon 845 EDL & TWRP Error Directory →

Persist Partition, Format Data & Sibling Firmware Q&A

Ready to Flash?

Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.

Open Full Guide