Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi A5 / POCO C71
The Xiaomi Redmi A5 / POCO C71 family (codename: serenity) features the Unisoc T7250 (12 nm) processor with Android 15 (Go Edition), a 6.88-inch 120Hz display, and a 5,200 mAh battery.
Whether recovering from a bootloop using serenity_global-images-A15.0.33.0.VGWMIXM-user-20261022.0000.00-15.0-global-230bc76565.tgz or installing European firmware serenity_eea_global-images-A15.0.18.0.VGWEUXM-user-20261013.0000.00-15.0-eea-977d0e1fd4.tgz, follow the verified steps below.
Which Flash Mode Should You Use?
Mi Flash Tool (Fastboot / flash_all.bat)
Full factory restoration mode executing flash_all.bat over Fastboot to write boot, vendor_boot, super, and userdata partitions cleanly.
Stock Recovery (ADB Sideload OTA)
Installs official signed Recovery OTA ZIP packages without wiping personal data or requiring an unlocked bootloader.
Unisoc SPD Upgrade Tool (PAC Emergency Flash)
Low-level unbricking path for Unisoc hardware when the device cannot boot into Fastboot or Recovery.
Essential Requirements Before Flashing serenity
Enable OEM Unlocking in Developer Options and verify bootloader status before flashing Fastboot packages.
Install Google Android Bootloader and Unisoc SPD USB drivers on 64-bit Windows.
Connect using a sturdy USB Type-C data cable plugged directly into a rear PC port to prevent signal drops.
Ensure your 5,200 mAh battery has ample charge so the phone does not power down during partition writes.
Running flash_all.bat with clean all erases internal storage completely. Back up files before starting.
Mi Flash Tool Execution Steps for Unisoc T7250
These 5 steps are tailored to the Xiaomi Redmi A5 / POCO C71 (Unisoc T7250). For screenshots, an interactive checklist, and troubleshooting, open the full Mi Flash Tool guide.
-
Enable OEM Unlocking in Developer Options and verify bootloader status
-
Extract serenity_global-images-A15.0.33.0.VGWMIXM-user-20261022.0000.00-15.0-global-230bc76565.tgz to C:\serenity_fw\
-
Install Unisoc SPD USB and Google Android Bootloader drivers on your PC
-
Enter Fastboot mode and connect via a rear USB motherboard port
-
Select firmware path in Mi Flash Tool, choose clean all, and flash
Locating flash_all.bat & Firmware Images in Unisoc T7250
Official Xiaomi Redmi A5 and POCO C71 Fastboot archives arrive as double-compressed .tgz files. Extracting twice with 7-Zip reveals flash_all.bat alongside the images subfolder containing preloader, boot, vendor_boot, and super partitions:
flash_all.bat
Unpacking serenity_global-images-A15.0.33.0.VGWMIXM-user-20261022.0000.00-15.0-global-230bc76565.tgz twice with 7-Zip extracts flash_all.bat at the top level alongside the images folder holding super.img, boot, and vendor partitions. Select the top directory in Mi Flash Tool.
Hardware codename serenity applies strictly to the Unisoc T7250 Redmi A5 and POCO C71. Never attempt to flash these packages to older Helio-based devices like water or ice.
Select the outer folder containing flash_all.bat in Mi Flash Tool (e.g. C:\serenity_fw\), not the nested images folder.
Always ensure clean all is selected to protect device security without causing cross-regional bootloops.
Xiaomi Redmi A5 / POCO C71 Firmware Versions
Tested Global, European, and Indian Fastboot builds for the Xiaomi Redmi A5 / POCO C71 (serenity). Access additional regional archives below.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
A15.0.33.0.VGWMIXM |
Global (MI) β Android 15 Go | Android 15.0 (Go Edition), Oct 2026 | 4.63 GB | 230bc7656569a7e17fd6cf76e7aba041 |
β¬οΈ Download |
A15.0.18.0.VGWEUXM |
Europe / UK EEA (EU) β Android 15 Go | Android 15.0 (Go Edition), Oct 2026 | 3.87 GB | 977d0e1fd4294cba1be78dfff6573a6f |
β¬οΈ Download |
A15.0.21.0.VGWINXM |
India (IN) β Android 15 Go | Android 15.0 (Go Edition), Oct 2026 | 3.41 GB | a2c1d322711ec0cdfc1296632b708916 |
β¬οΈ Download |
Browse all 10 regional Android 15 Go packages for Redmi A5 & POCO C71 on AndroidFirmwareFile.com β View full archive on AndroidFirmwareFile.com β
Available Flashing Modes for Redmi A5 / POCO C71
The Xiaomi Redmi A5 and POCO C71 (hardware codename serenity) are powered by the Unisoc T7250 chipset running Android 15 (Go Edition) under HyperOS. Unbricking or updating the system cleanly involves executing flash_all.bat from packages like serenity_global-images-A15.0.33.0.VGWMIXM-user-20261022.0000.00-15.0-global-230bc76565.tgz or European release serenity_eea_global-images-A15.0.18.0.VGWEUXM-user-20261013.0000.00-15.0-eea-977d0e1fd4.tgz.
For standard maintenance updates on functioning systems with locked bootloaders, stock Recovery OTA ZIP packages can also be installed using ADB sideload.
Resolving Redmi A5 & POCO C71 Fastboot & Driver Issues
Bootloader Unlock Rejection: "Err:0xffffffff" or Unsupported Token in Mi Unlock
Unisoc-based Android Go models require matched USB drivers and proper account binding. If Mi Unlock fails with an unknown error or rejects the device token, confirm OEM Unlocking is active inside Developer Options and check if your unit is an operator-locked carrier variant.
Unisoc SPRD/PAC Port Drop & Device Manager Disconnect During Fastboot
On 64-bit Windows systems, the Unisoc USB handshake may drop after a few seconds if driver signature enforcement interferes. Install official Unisoc SPD drivers and connect your USB Type-C cable directly into a rear USB 2.0 port on the motherboard rather than a USB 3.0 front hub.
Flash Script Halts on "sparse super.img write failure"
The 64GB or 128GB eMMC 5.1 storage can experience write timeouts during large dynamic super partition transfers if cable signal quality degrades. Switch to a shorter USB Type-C data cable and ensure your battery is charged above 40%.
Encountering an unexpected error code or connection drop? Unisoc & Fastboot Error Solutions β
Unisoc T7250 & Android 15 Go Practical Q&A
While mainstream Xiaomi flagships enforce complex HyperOS community level requirements and token authorization through the Mi Community app, entry-level Android 15 Go devices on the Unisoc T7250 platform rely on simplified local authorization. However, carrier-locked network variants restrict bootloader unlock toggles in Developer Options entirely.
Mi Flash Tool is the standard utility for running official Fastboot TGZ packages (flash_all.bat) whenever your device can still enter the Fastboot menu. Unisoc SPD Upgrade Tool or ResearchDownload is reserved for raw .pac firmware packages when attempting low-level emergency recovery on a completely unbootable device.
Yes. Official Xiaomi flash_all.bat scripts selectively target system partitions such as boot, vendor_boot, super, and userdata. Calibration blocks storing your dual-SIM IMEI records and cellular radio tuning data (prodnv, nvdata) remain untouched.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.