Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Redmi Y3
The Xiaomi Redmi Y3 was released in April 2019, built on the efficient Qualcomm Snapdragon 632 SDM632 (14nm FinFET, 64-bit Octa-core: 4x 1.8 GHz Kryo 250 Gold + 4x 1.8 GHz Kryo 250 Silver) platform. Featuring a 6.26-inch HD+ waterdrop display, a 32 MP AI selfie camera, and a 4000mAh battery, it provides dependable daily performance.
Flashing official factory Fastboot firmware using Xiaomi Mi Flash Tool repairs corrupted partitions, recovers bootlooping devices, and restores official software stability. Follow the verified driver preparation and bench steps below to flash your device safely.
Which Flash Mode Should You Use?
Fastboot Mode (Bootloader Flashing)
Official flashing interface for unlocked devices. Writes partition blocks via Mi Flash Tool or flash_all.bat scripts.
Stock Android Recovery Mode
Stock recovery interface for executing factory data wipes or clearing cache partitions.
What You Need Before Flashing
A PC running 64-bit Windows with Mi Flash Tool and official Xiaomi/Qualcomm USB drivers installed.
Download and unpack the official onc Fastboot archive twice with 7-Zip until flash_all.bat is visible.
Ensure the 4000mAh battery has at least 50% charge to ensure stable power delivery throughout the flashing process.
Use a quality microUSB data cable connected directly to a rear USB 2.0 port on the computer motherboard.
In Mi Flash Tool, select "clean all" at the bottom right. Never select "clean all and lock" on cross-region software.
How to Flash the Xiaomi Redmi Y3 β Quick Overview
A fast reference for flashing the Xiaomi Redmi Y3 (Snapdragon 632) using Mi Flash Tool. For the complete walkthrough with images and error troubleshooting, see the full guide.
-
Unlock bootloader & extract Fastboot onc_in_global_images_V11.0.6.0.QFFINXM_20210408.0000.00_10.0_in_f97b051544.tgz package
-
Install Qualcomm USB & Fastboot Drivers
-
Boot phone into Fastboot Mode
-
Select firmware folder & choose "clean all"
-
Flash partitions and await automatic reboot
Fastboot Flash Script & Firmware Package for Snapdragon 632
Official Fastboot firmware packages for the Xiaomi Redmi Y3 (onc) contain raw partition images (boot.img, system.img, vendor.img, recovery.img, and cust.img) orchestrated by flash_all.bat, flash_all_except_storage.bat, and flash_all_lock.bat. When executed through Mi Flash Tool, these scripts write partition images directly to the Qualcomm Snapdragon 632 eMMC 5.1 storage controller.
flash_all.bat
Official factory Fastboot firmware for the Xiaomi Redmi Y3 utilizes flash_all.bat and the /images/ partition directory. In Mi Flash Tool, select the root extracted folder containing these scripts.
The Redmi Y3 (board codename onc) features the Qualcomm Snapdragon 632 processor with 3GB/4GB LPDDR3 RAM, eMMC 5.1 storage, and a 4000mAh battery.
Always confirm your device codename is "onc" using "fastboot getvar product" before flashing. Do not attempt to flash firmware intended for the standard Redmi 7 ("onclite"), as differing front camera drivers and partition parameters will cause flashing or camera failures.
Xiaomi Redmi Y3 Firmware Versions
Tested stock firmware packages for confirmed hardware variants of the Xiaomi Redmi Y3. Always confirm your model codename is "onc" before flashing.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V11.0.6.0.QFFINXM (20210408.0000.00) |
India Stable (IN) β Official Fastboot Factory Image | Android 10.0 (MIUI 11) | 2.5 GB | f97b0515444ee33b60cc722477781ebc |
β¬οΈ Download |
This device includes additional recovery packages and archival resources. Browse the complete archive on AndroidFirmwareFile.com β
Xiaomi Redmi Y3 β Important Notes
Flashing official Fastboot TGZ firmware via Mi Flash Tool unbricks devices stuck on the Mi boot logo, fixes system bootloops after updates, and returns your device to official factory stability.
Because Qualcomm devices can be sensitive to USB controller timing drops, always connect your microUSB cable to a native USB 2.0 port on the computer motherboard rather than an unpowered front-panel port or USB hub.
Troubleshooting Xiaomi Redmi Y3 Flashing & Bootloader Issues
Bootloader Lockout: "Flash xbl error" or "Critical partition flashing is not allowed"
Community repair discussions indicate this error occurs when attempting to flash official Fastboot firmware on a device whose bootloader remains locked. Xiaomi bootloaders block writes to bootloader-level partitions like xbl and tz on locked devices. Technicians suggest officially unlocking the bootloader with the Mi Unlock utility prior to running Mi Flash Tool.
Folder Path Syntax: "cannot find file flash_all.bat" in Mi Flash Tool
Observed when the downloaded .tgz archive is only extracted once (leaving an unextracted .tar archive) or when the folder path contains spaces, non-ASCII characters, or excessive directory nesting. Repair technicians recommend extracting the archive twice using 7-Zip into a simple root directory (such as C:\onc_fw\) so flash_all.bat resides directly in the selected folder.
EDL Handshake: Qualcomm HS-USB QDLoader 9008 Authentication Challenge
When attempting emergency recovery on a hard-bricked handset via motherboard test points, Mi Flash Tool may prompt for an authorized Xiaomi service account login. The Snapdragon 632 platform on later production runs enforces cryptographic Firehose programmer validation. Community members recommend using authorized service tools or recovering via unlocked Fastboot mode whenever possible.
For in-depth Xiaomi Fastboot error codes, driver troubleshooting, and bootloader recovery: Mi Flash Tool Error Directory β
Frequently Asked Questions β Xiaomi Redmi Y3
This error indicates an unlocked bootloader requirement has not been fulfilled, or Windows has dropped the Fastboot USB interface. Verify that the bootloader status is officially unlocked via Mi Unlock. If the device is not detected, connect the microUSB cable to a rear USB 2.0 port on your computer and confirm that "Android Bootloader Interface" shows without errors in Windows Device Manager.
If the handset cannot enter Fastboot or Recovery, it must be flashed via Qualcomm Emergency Download (EDL 9008) mode. This requires removing the back cover and bridging the two golden test points on the motherboard near the battery connector with metallic tweezers while connecting the USB cable. Note that Xiaomi firehose authentication may require authorized service center permissions.
Xiaomi fastboot ROMs are distributed as double-compressed .tgz files. Archive utilities often unpack only the outer layer, leaving an uncompressed .tar archive behind. Technicians must open the .tar file and extract it a second time with 7-Zip to reveal the raw batch scripts and the /images/ folder. Also ensure the directory path contains no spaces (e.g., C:\onc_fw\).
The Qualcomm Snapdragon 632 platform on Redmi Y3/Redmi 7 has Anti-Rollback protection enabled. You can check your current board index by running "fastboot getvar anti" in a terminal. Flashing the final official Android 10 (V11.0.6.0.QFFINXM) build provided here is safe, but attempting to downgrade to earlier Android 9.0 builds with a lower index can cause a brick.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.