Before you flash: Flashing firmware will erase all data on your device. Back up contacts, photos, and apps before proceeding. FlashGuideHub is not responsible for any damage caused by following this guide.
About the Xiaomi Mi 9T / Redmi K20
The Xiaomi Mi 9T / Redmi K20 was released in June 2019 on the Qualcomm Snapdragon 730 SM7150-AA (8nm LPP, 64-bit Octa-core: 2x 2.2 GHz Kryo 470 Gold + 6x 1.8 GHz Kryo 470 Silver) platform. Featuring a notchless 6.39-inch AMOLED display, motorized pop-up selfie camera, and a 4000 mAh battery with 18W fast charging, the device became a standout mid-range phone worldwide.
Flashing official factory Fastboot firmware using Xiaomi Mi Flash Tool repairs corrupted system partitions, fixes persistent bootloops, and restores official MIUI stability. Follow the verified steps below to flash your device safely.
Which Flash Mode Should You Use?
Fastboot Mode (Bootloader Flashing)
Official flashing interface for bootloader-unlocked handsets. Writes partition blocks via Mi Flash Tool or flash_all.bat scripts.
Custom Recovery Mode (OrangeFox / TWRP)
Interface for flashing community custom ROMs (such as Xiaomi.eu), ZIP mods, or performing partition-level storage wipes.
Stock Recovery / Local Update
Official on-device recovery method for installing signed regional MIUI update packages without a PC.
Qualcomm HS-USB QDLoader 9008 (EDL Mode)
Emergency download mode accessed via motherboard test points. Requires authorized Xiaomi service credentials on Snapdragon 730.
Essential Workshop Equipment & Mi Flash Requirements
A PC running 64-bit Windows with Xiaomi Mi Flash Tool and official Qualcomm USB drivers installed.
Download and unpack the official davinci Fastboot archive twice with 7-Zip until flash_all.bat is visible.
Ensure the 4000 mAh battery holds at least 50% charge to ensure stable power delivery throughout the flashing process.
Connect an authentic USB Type-C data cable directly into a rear USB 2.0 port on the computer motherboard.
In Mi Flash Tool, select "clean all" at the bottom right. Never select "clean all and lock" on modified devices.
5-Step Mi Flash Walkthrough for Xiaomi Mi 9T
These 5 steps are tailored to the Xiaomi Mi 9T / Redmi K20 (Snapdragon 730). For screenshots, an interactive checklist, and troubleshooting, open the full Mi Flash Tool guide.
-
Extract davinci_eea_global_images_V12.1.1.0.RFJEUXM TGZ archive twice using 7-Zip
-
Power down phone and hold Volume Down + Power until orange Fastboot bunny displays
-
Connect via native rear motherboard USB 2.0 port to prevent Snapdragon 730 packet drops
-
Load extracted firmware root directory and tick "clean all" (flash_all.bat) in Mi Flash Tool
-
Click Flash and allow 5 to 10 minutes on first boot as user data encryption completes
Fastboot Rawprogram XML & Firmware Package for SM7150
Official Fastboot firmware packages for the Xiaomi Mi 9T and Redmi K20 (davinci / davinciin) utilize rawprogram0.xml and patch0.xml partition configurations executed through flash_all.bat. When loaded into Xiaomi Mi Flash Tool, these scripts write boot, recovery, system, vendor, and cust partitions directly to the Snapdragon 730 UFS 2.1 flash memory controller.
rawprogram0.xml
Official factory Fastboot firmware for the Xiaomi Mi 9T and Redmi K20 utilizes rawprogram0.xml and patch0.xml executed through flash_all.bat. In Mi Flash Tool, select the root extracted folder containing these scripts.
The Xiaomi Mi 9T (codename davinci) and Redmi K20 (davinci / davinciin) share the Qualcomm Snapdragon 730 processor with 6GB or 8GB LPDDR4X RAM, UFS 2.1 storage, and a 4000 mAh battery supporting 18W fast charging.
Always verify whether your phone is international davinci (M1903F10G with NFC) or Indian davinciin (M1903F10I without NFC) before flashing. Never flash firmware designed for the flagship Mi 9T Pro / Redmi K20 Pro (codename raphael on Snapdragon 855).
Xiaomi Mi 9T / Redmi K20 Firmware Versions
Tested stock firmware packages for confirmed hardware variants of the Xiaomi Mi 9T / Redmi K20. Always confirm your model codename (davinci vs davinciin) before flashing.
| Version | Region | Android Version | Size | MD5 | Download |
|---|---|---|---|---|---|
V12.1.1.0.RFJEUXM (20210903) |
EEA / Europe Stable (EUXM) | Android 11.0 (MIUI 12.1) | 3.2 GB | 3c2213723807388ebfd3e58767c8f6ba |
⬇️ Download |
V12.1.4.0.RFJINXM (20210713) |
India Stable (INXM) | Android 11.0 (MIUI 12.1) | 3.0 GB | d75547fd02a06c139cf039c987715ad8 |
⬇️ Download |
V12.5.2.0.RFJCNXM (20211103) |
China Stable (CNXM) | Android 11.0 (MIUI 12.5 Enhanced) | 4.0 GB | 24856b6f4f7eb8b1630faa0b9cde0618 |
⬇️ Download |
V12.5.2.0.RFJCNXM (v12-11) |
Xiaomi.eu Multilingual (Recovery) | Android 11.0 (MIUI 12.5 Enhanced) | 2.4 GB | 8e20b5680578abdbda0207c862a3da97 |
⬇️ Download |
This device family includes 13 verified packages across EEA, Global, China, Russia, India, Xiaomi.eu, TWRP, and OrangeFox releases. Browse the complete 13-package archive on AndroidFirmwareFile.com →
Snapdragon 730 Fastboot Partition Layout & Hardware Notes
Flashing official Fastboot firmware through Xiaomi Mi Flash Tool repairs corrupted partitions, recovers phones stuck in bootloops, and restores the factory MIUI operating system cleanly.
Because emergency download (EDL 9008) recovery on the Qualcomm Snapdragon 730 requires authorized Xiaomi service credentials, keeping your bootloader officially unlocked and preserving Fastboot access is your primary repair path.
Troubleshooting Xiaomi Mi 9T & Redmi K20 Flashing & Mi Flash Errors
Anti-Rollback Rejection: "FAILED (remote: 'Anti-rollback check error')"
This error occurs when attempting to flash a Fastboot ROM with an Anti-Rollback (ARB) index lower than the one fused to your Snapdragon 730 processor. Check your current hardware index by running fastboot getvar anti. Always select a firmware package matching or exceeding your device's current ARB version.
Regional Root Key Lockout: "This MIUI version can't be installed on this device"
This bootloop occurs when selecting "clean all and lock" (flash_all_lock.bat) while flashing Global or EEA software onto Chinese hardware (M1903F10A/C). The bootloader detects mismatched regional root keys and blocks booting. Boot back into Fastboot mode with Volume Down + Power and use the Mi Unlock tool to unlock the bootloader, then flash using "clean all".
Mi Flash False Failure: "error: Not catch checkpoint ($fastboot -s .* lock)"
This red notice frequently displays at the end of flashing when "clean all" is selected. It is a harmless false alarm caused by Mi Flash expecting a bootloader re-lock status string that flash_all.bat does not return. If partition writes completed and the phone reboots to the animated logo, the flashing operation was completely successful.
For in-depth Xiaomi Fastboot error codes, EDL testpoint pinouts, and driver troubleshooting: Mi Flash Tool Error Directory →
Workshop Flashing & Troubleshooting FAQ
When installing custom recoveries like TWRP or OrangeFox over stock MIUI, Android Verified Boot (AVB 2.0) will detect the modified recovery partition and force the phone back into Fastboot mode. Before rebooting into recovery, flash the stock vbmeta image with verification disabled: fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img.
The persist partition stores unique hardware calibration data for the Goodix/Focaltech optical under-display fingerprint sensor and motorized pop-up camera stepper motor limits. Official Fastboot flashing with Mi Flash Tool using the "clean all" script safely excludes the persist partition. Never erase or overwrite persist.img with a file from another handset.
On the Snapdragon 730 platform, emergency download mode (EDL 9008) requires authorized Xiaomi service account credentials to write firehose partitions. If your device slipped into 9008 mode following an interrupted flash, experienced repairers suggest holding Volume Down and Power together for 15 to 20 seconds to attempt forcing a hard reboot back into Fastboot mode before seeking authorized service login.
Following a clean installation using Mi Flash Tool, the Qualcomm Snapdragon 730 processor must initialize File-Based Encryption (FBE) cryptographic keys across the internal UFS 2.1 storage and build the initial Dalvik/ART runtime cache. This first boot sequence typically takes 5 to 10 minutes. Do not disconnect power or force-reboot while the animated Mi logo is on screen.
Ready to Flash?
Follow the full step-by-step Mi Flash Tool guide with interactive progress tracking, prerequisite checklist, and complete troubleshooting.